• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.483-491
• /
• 2012

It is expected that, in the future, DC power service will be widely used for photovoltaic home power generation systems, since DC consuming devices are ever increasing. Instead of using multiple converters to convert DC to AC and then AC to DC, the power service could solely be based on DC. This would eliminate the need for converters, reducing the cost, complexity, and possibly increasing the efficiency. However, configuration of direct DC power service with mechanical contacts can cause spark voltage or an electric shock when the switch is turned on and off. To solve these problems, in this paper, a contactless power supply for a DC power service that can transfer electric power produced by photovoltaics to the home electric system using magnetic coupling instead of mechanical contacts has been proposed. The proposed system consists of a ZVS boost converter, a half-bridge LLC resonant converter, and a contactless transformer. This proposed contactless system eliminates the use of DC switches. To reduce the stress and loss of the boost converter switching devices, a lossless snubber with coupled inductor is applied. In this paper, a switching frequency control technique using the contactless voltage sensing circuit is also proposed and implemented for the output voltage control instead of using additional power regulators. Finally, a prototype consisted of 150W boost converter has been designed and built to demonstrate the feasibility of the proposed contactless photovoltaic DC power service. Experimental results show that 74~83% overall system efficiency is obtained for the 10W~80W load.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.507-510
• /
• 2005

이 논문에서는 시맨틱 웹 서비스의 기술들을 이용하여 에이전트들이 상황을 과악하고 작업계획을 동적으로 수행할 수 있는 다중-에이전트 기반의 시맨틱 웹서비스 시스템을 설계하고 도서관 서비스 업무에 적용해 구현 하였다.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.276-278
• /
• 1998

This paper introduce an algorithm for service restoration in electric power distribution systems. Power utility performs service restoration in order to restore out-of-service areas at fault. Developing effective service restoration program is a cost-effective approach to improve service reliability and to enhance customer satisfaction. The main objective in service restoration program is to restore as much load as possible by transferring de-energized loads via network reconfigurations to other supporting distribution feeders without violating operating and engineering constrains.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.141-148
• /
• 2013

Smart grid can two-way communication using ICT(Information & Communication Technology). Also, smart grid can supply to dynamic power that grafted to electric vehicle can activate to electric vehicle charging infrastructure and used to storage battery of home. Storage battery of home can resale to power provider. These electric vehicle charging infrastructure locate fixed on home, apartment, building, etc charging infrastructure that used fluid on user. If don't authentication for user of fluid user use to charging infrastructure, electric charging service can occurred to illegal use, electric charges and leakgage of electric information. In this paper, we propose smartcard and dynamic ID based user authentication scheme for used secure to electric vehicle service in smart grid environment.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.151-156
• /
• 2004

Although insulation equipment is installed, it is inevitable to avoid the stray current because rail is the return way of the direct current that is power of electric motor car. In this paper, by the investigation of the present state of underground facilities, and looking into the reason of electric corrosion, and analysis of corrosion accident cases of inside and outside of the country, fundamental data, to reduce of stray current and to prevent electric corrosion, were accumulated to enhance the safety of railway operation service.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.243-246
• /
• 2004

Currently, advanced countries invest lots of efforts to develop improvement of electric power production and supply, confronting environmental problems and new energy development. They set up long term plan focusing on electric power transmission infrastructure construction technology, establishment of the customer care service network using electric technologies, improvement of economic productivity by innovative electric technology, prevention of global warming gas and clean and efficient energy use etc. Comparing to those countries, the level of technologies that we have are in behind and moreover, technological resources are limited. Therefore, Korea is required to reconsider efficient distribution of R&D investment by concentrating on limited R&D resources to important technologies which could be stepping stone to gain competitive advantage. It can be done through comparative analysis of electric technologies among advanced countries and analysis of electric technology development policy.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.1
• /
• pp.15-25
• /
• 2018

ISO/IEC 15118 is a standard for communications and services for electric vehicle charging infrastructure. Although this standard deals only with data communication between an electric vehicle and a charge station, communication with the outside is essential for establishing an authentication system for vehicle certification and V2G service for electric power transmission. In this study, it was designed to verify the information of electric car charging infrastructure in electric power system through communication link between ISO/IEC 15118 electric vehicle model and IEC 61850 standard MMS protocol. This is demonstrated in the field so that the electric vehicle communication data is linked with the micro grid management system. This could be used as an element technology in other distributed power sources as well as electric cars in the future.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2169-2170
• /
• 2006

J2ME service technology has advantage that can embody independent and, more soft system in DICOM 3.0 and medicine reflex administration server, client's OS that is medical treatment reflex standard in radio Internet. Also, intranet that do web basedspread, and develop by system that can alternate existent client-server structure rapidly. Specially, posibility of improvement is much because is connecting being limited in internet environment that medical equipment and information system of various kinds of machine are wire in medical institution and so on. Because do medical treatment reflex transmission module development applying DICOM technology and filtering techniques of "m-PACS Rehalibitated " in this research, existence, by interlock in radio usable Mobile reflex conversion system design and embody. That is, patient's information which is stored to various systems to be transmited and can give big help in medical examination and treatment to reflex client without being wooed doctor's interpretation result and so on in place through environment to be radish tentacle bar see

• JOURNAL OF ELECTRICAL WORLD
• /
• no.12 s.144
• /
• pp.18-23
• /
• 1988

• JOURNAL OF ELECTRICAL WORLD
• /
• no.10 s.94
• /
• pp.32-37
• /
• 1984