• 전기학회논문지
• /
• 제57권5호
• /
• pp.741-747
• /
• 2008

This paper proposes a new concept of IDSP(Intelligent Digital Switchgear Panel) which can solve the problem of the safety, the reliability and the convenience to correspond to the requirement of the general electric customer or electric power company under the ubiquitous-based home automation environments. By analyzing their requirement functions, a 32-bit micro processor is adopted as main controller to support the designed functions efficiently. The DSP-based single phase power management device is utilized to collect the electric power information and the ethernet convertor to communicate through internet among the IDSPs and the remote computer system. In the proposed IDSP, the several functions are implemented such as the earth leakage level display and waveform transmission, the electric fee display, the voltage management, the load management and the load control function. Finally, the prototype of the IDSP is made experimently based on the designed results, and then the effectiveness is verified by testing its basic functions.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.631-640
• /
• 2016

A dual-mode power management for a hybrid-electric UAV with a cruise power of 200W is proposed and empirically verified. The subject vehicle is a low-speed long-endurance UAV powered by a solar cell, a fuel cell, and a battery pack, which operate in the same voltage bounds. These power sources of different operational characteristics can be managed in two different methods: passive management and active management. This study proposes a new power management system named PMS2, which employs a bypass circuit to control the individual power sources. The PMS2 normally operates in active mode, and the bypass circuit converts the system into passive mode when necessary. The output characteristics of the hybrid system with the PMS2 are investigated under simulated failures in the power sources and the conversion of the power management methods. The investigation also provides quantitative comparisons of efficiencies of the system under the two distinct power management modes. In the case of the solar cell, the efficiency difference between the active and the passive management is shown to be 0.34% when the SOC of the battery is between 25-65%. However, if the SOC is out of this given range, i.e. when the SOC is at 90%, using active management displays an improved efficiency of 6.9%. In the case of the fuel cell, the efficiency of 55% is shown for both active and passive managements, indicating negligible differences.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.572-574
• /
• 1998

In this paper, we are proposed design of ATM networks to transfer for electric power system informations, proposed transport networks is partitioned management part and functional part, management part is partitioned edge network, core network, local network, authority network, functional part is partitioned core network, access network, edge area. It is based on laying and partitioning by ITU-T G.805, we also proposed ATM network requirements for Carrier Relay traffic acceptability in electric power system information.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.17-19
• /
• 2003

Electric arc furnace has consumed plenty of power. Hence electric arc furnace can be expected to use for demand side management. When electric arc furnace use for demand side management, electric arc furnace frequently occur a starting and a stop. Electric arc furnace irregularity change consumption of power. Due to character of time-varing and non-linear, electirc arc furnace has a problem with voltage quality(flicker, harmonics). Producted harmonic in electric art furnace is different any harmonic source because of electric arc furnace peculiar operating. Accordingly, analysis for generated harmonic in electric arc furnace operating is demanded. This paper analyze effect of harmonic by arc furnace operating.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1497-1502
• /
• 2014

Electric load forecasting is essential for stable electric power supply, efficient operation and management of power systems, and safe operation of power generation systems. The results are utilized in generator preventive maintenance planning and the systemization of power reserve management. Development and improvement of electric load forecasting model is necessary for power system maintenance and operation. This paper proposes daily maximum electric load forecasting methods for the next 4 weeks with a seasonal autoregressive integrated moving average model and an exponential smoothing model. According to the results of forecasting of daily maximum electric load forecasting for the next 4 weeks of March, April, November 2010~2012 using the constructed forecasting models, the seasonal autoregressive integrated moving average model showed an average error rate of 6,66%, 5.26%, 3.61% respectively and the exponential smoothing model showed an average error rate of 3.82%, 4.07%, 3.59% respectively.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.90-97
• /
• 2013

In recent years, the many electric saving methods are studied because of difficulty of meeting the demand. The electric energy management such as monitoring of branch power consumption, demand control, metering, power quality monitoring, electric safety monitoring can make energy saving. The purpose of this paper is to develop a system which can provide the integrated management of various functions required for energy management by consumers. In this system all functions which were embodied into each devices are integrated into intelligent meter. The developed systems are tested and implemented by installing at consumer electric distribution panel.

• 경영과학
• /
• 제13권3호
• /
• pp.23-35
• /
• 1996

This article describes an alternative approach for determining Korea's optimal power generation mix through an Analytic Hierarchy Process(AHP). Five criteria, strategic, economic, technological, environmental, and socio-political criterion, are considered simultaneously, as opposed to the traditional emphasis on economic criterion only. The electric power sources examined here included nuclear power, coal-fired power, and LNG fired power.

• 한국전자통신학회논문지
• /
• 제5권5호
• /
• pp.498-503
• /
• 2010

최근, 전력공급의 안정성과 신뢰성 그리고 고품질화를 위해 인터넷을 기반으로 하는 산업용 디지털 분전반이 새롭게 요구되고 있다. 따라서 본 논문에서는 3상 4선식 전력공급방식을 기반으로 하는 산업용 3상 분전반이 설계된다. 그리고 3상 산업용 분전반을 위한 전력관리 모듈이 시험 제작되며, 끝으로, 3상 전구 부하 시험을 통해 시작품의 3상 전압, 전류 측정 기능이 검증된다.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.79-86
• /
• 2022

Recently, the amount of maintenance is increasing due to the aging of power facilities, but the budget is constrained. Therefore, the importance of asset management that selects replacement priorities based on the failure probability and enhances investment effects is increasing. Because the number of distribution transformers is very large, the proportion of investment cost is very high. Therefore, it is important to select the investment priority by evaluating the reliable remaining life based on the failure probability. This paper evaluates the statistical expected life using the failure data of distribution transformers for the last 11 years and the current operation data. The hazard rate of distribution transformer and MV cable was compared with each other and the adequacy of early failure removal was reviewed and the statistical expected life corresponding to the cumulative failure probability B3% was calculated.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.275-286
• /
• 2019

본 논문은 DC (Direct Current) 배전망 혹은 DC 마이크로그리드 운영을 위한 실시간 DC 계통해석 응용프로그램의 개발에 대한 내용을 다룬다. 응용프로그램은 중앙 에너지 관리시스템(EMS: Energy Management System)에 탑재되어 운영자에게 실시간으로 운영 솔루션을 제공한다. DC 배전계통을 해석하기 위한 프로그램의 구성 및 시퀀스를 제안한다. 각 프로그램의 알고리즘과 AC 계통 프로세스와의 차이점을 분석한다. 한국전력공사 고창전력시험센터 내 DC 배전망 실증사이트를 소개하고, EMS 구축 내용을 기술한다. 개발된 DC 계통해석 응용프로그램을 실증 사이트 EMS에 탑재하여, 검증 시험을 수행한다. DC 배전망 전압 제어를 위한 시험 시나리오를 구성에 대해 논한다. 마지막으로 실증시험 결과 측정 데이터, 응용프로그램 결과 데이터를 PSCAD/EMTDC를 이용한 오프라인 시뮬레이션 결과값과 비교 분석하여 정합성을 검증한다.