• Journal of The Korean Dental Society of Anesthesiology
• /
• v.9 no.2
• /
• pp.108-115
• /
• 2009

Trauma to any nerve may lead to persistent paresthesia. Trauma to the nerve sheath can be produced by the needle. The patient frequently reports the sensation of an electric shock throughout the distribution of the nerve involved. It is difficult for the type of needle used in dental practice to actually sever a nerve trunk or even its fibers. Trauma to the nerve produced by contact with the needle is all that is needed to produce paresthesia. Hemorrhage into or around the neural sheath is another cause. Bleeding increases pressure on the nerve, leading to paresthesia. Injection of local anesthetic solutions contaminated by alcohol or sterilizing solution near a nerve produces irritation; the resulting edema increases pressure in the region of the nerve, leading to paresthesia. Persistent paresthesia can lead to injury to adjacent tissues. Biting or thermal or chemical insult can occur without a patient's awareness, until the process has progressed to a serious degree. Most paresthesias resolve in approximately 8 weeks without treatment. In most situations paresthesia is only minimal, with the patient retaining most sensory function to the affected area. In these cases there is only a very slight possibility of self injury. But, the patient complaints the discomfort symptoms of paresthesia, such as causalgia, neuralgiaform pain and anesthesia dolorosa. Most paresthesias involve the lingual nerve, with the inferior alveolar nerve a close second. This is the report of a case, that had the persistent paresthesia care on left lingual & buccal shelf regions after the lingual and long buccal nerve block anesthesia.

• The Korean Journal of Pain
• /
• v.18 no.1
• /
• pp.39-42
• /
• 2005

Background: Besides its general anesthetic effect, ketamine interacts with sodium channels in a local anesthetic-like fashion, including the sharing of binding sites with those commonly used by clinical local anesthetics. This study evaluated the dose related effects of ketamine during epidural anesthesia with 0.5% ropivacaine. Methods: Sixty ASA physical status I II patients, scheduled for minor elective surgery under epidural anesthesia using 0.5% ropivacaine, were randomly divided into three groups (n = 20 each). The patients initially received either 0.5% ropivacaine (group 1), ketamine (0.1 mg/kg) in addition to the epidural 0.5% ropivacaine (group 2) or ketamine (0.2 mg/kg) in addition to the epidural 0.5% ropivacaine (group 3). The regression of sensory block was assessed by transcutaneous electric stimulation (TES), equivalent to a surgical incision. Motor block was assessed using the Modified Bromage's scale. Episodes of bradycardia, hypotension and sedation were also recorded. Results: There were no significant differences among the three groups in the maximal levels of sensory block or the times taken for these levels to be reached. The mean times for the block to regress to two and four segments below the maximal level were significantly prolonged by epidural ketamine. Conclusions: Epidural ketamine prolongs the duration of ropivacaine epidural anesthesia. These results suggest that ketamine has local anesthetic-like actions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.175-177
• /
• 2006

Here we report an enhanced flexoelectric switching in a self-assembled system of smectic liquid crystal and some specific dopant. The assembled unit block seemed to have electric dipole and as a result induces large flexoelectric polarization due to its asymmetric shape and shows fast switching to the electric field. The unit blocks are oriented in a helical fashion in the cell with large gap (${\sim}5{\mu}m$) and shows selective reflection property. In the thin cell (${\sim}2{\mu}m$), the unit blocks are aligned homeotropically on the bare ITO substrate with no surface treatment and shows fast decaying time.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.134-140
• /
• 2001

Parallel processing has the potential to be cost effectively used on computationally intense power system problems. But this technology is not still available is not only parallel computer but also parallel processing scheme. Testing these algorithms to ensure accuracy, and evaluation of their performance is also an issue. Although a significant amount of parallel algorithms of power system problem have been developed in last decade, actual testing on processor architectures lies in the beginning stages. This paper presents the parallel processing algorithm to supply the base being able to treat power flow by newton's method by the distributed memory type parallel computer. This method is to assign and to compute teared blocks of sparse matrix at each parallel processors. The testing to insure accuracy of developed method have been done on serial computer by trying to simulate a parallel environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.520-523
• /
• 2007

In this paper, we present a novel method to minimize flicker and gray scale errors automatically across the entire panel by using a compensation of the gray levels of image. It was realized by image simulation with feedback structure. As a result of simulation, we observed flickers from the simulated image. And we compensated the gray scale levels for original image. The compensated gray scale levels correspond to flickers which are generated by difference of pixel voltage in odd and even frame. And we simulated repetitively the compensated image by our block diagram for reduction flicker. Consequently, we confirmed flickers have been decreased more than 87%. Furthermore, our method provides visualization and valid prediction for improvement of TFT-LCD panel

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.232-233
• /
• 2012

This paper presents an effective control scheme for an electric vehicle battery charger where a symmetrical bridgeless power factor-corrected converter and a buck converter are cascaded. Both converters have been popular in industries because of their high efficiency, low cost, and compact size, hence combining these converters makes the overall battery charging system strongly efficient. Moreover, this charger topology can operate at universal input voltage and attain a desired battery current and voltage without ripple. In order to achieve a unity input power factor and zero input current harmonic distortion, the proposed control scheme adopts duty ratio feed-forward control technique in both current and voltage control loop. Additionally, in the current loop, its reference is created by a phase-locked loop (PLL) block, leading to a pure sinusoidal input current although the input voltage waveform is being distorted. The feasibility and practical value of the proposed approach are verified by simulation and experiment with an 110V/60Hz ac line input and 1.5kW-72V dc output of the battery charging system.

• Computers and Concrete
• /
• v.24 no.5
• /
• pp.437-444
• /
• 2019

PLC and its expansion module, electric ball valve and cooling pipe, electric heating steel plate and various components of the system, which is used to control test and process data. By automatically adjusting the opening of the valve, the system makes the top temperature and cooling speed develop along the ideal temperature diachronic curve. Moreover, the system enables the temperature difference between inside and surface of test block limited in a given range by automatically controlling the surface board heating. The method of physical simulation test by sandbox with built-in cooling water pipe and heating rod is adopted. On the premise of a given standard value, the operation of the system is checked under different working conditions. Further, an extension of this system is proposed, which enables its application to obtain some thermal parameters when cooperating with numerical simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.301-304
• /
• 1997

Effects of volatile impurities on deterioration characteristics of XLPE were investigated. Block type plate with needle-plane electrode and artificial void filled with $N_2$gas or humidity was subjected under high electric field. The dyed region by oxidation reaction around the artificial void filled with humidity was detected before tee initiation. Electrical tree was started from the tip of void filled with $N_2$gas earlier than humidity.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2667-2670
• /
• 2005

In this Paper is analyzed about FMS(Fieldbus Message Specification) service of FOUNDATION Fieldbus and designed using of UML(Unified Modeling Language). The FMS provides a number of services for reading, writing, and otherwise accessing objects. The FOUNDATION Fieldbus protocol is object oriented. The information in the devices is accessed in the form of objects. In FMS, the objects for configuring device and strategy in a node are listed in an object dictionary(OD). Each object is identified by an index. For example, every function block and every parameter has an index.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1280-1285
• /
• 2000

The paper deals with a theoretical study on the vibrational characteristics of piezoelectric torsional transducers. The differential equations of piezoelectric torsional motion have been derived in terms of the circumferential displacement and the electric potential. Applying mechanical and electrical boundary conditions has yielded the characteristic equations of natural vibration in several transducer types. Numerical results have clarified the effect of the piezoelectric phenomenon on the mechanical resonance and the effect of the elastic block of a Langevin-type transducer on the natural frequency.