• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.1-14
• /
• 2022

In this study, in order to analyze the preference for UAM of public transportation users following the introduction of urban air transportation(UAM), A preference consciousness(SP) survey was conducted on 840 users of Incheon public transportation using the Incheon International Airport-Incheon Gil Hospital route, which is the urban air traffic(UAM) demonstration route section. In addition, the means selection model was estimated based on the results of conducting a preference consciousness (SP) survey. As a result of analyzing the time value for travel using the established means selection model, it was found to be 56,428 won/hour, As a result of verifying the elasticity of travel cost (won), in-vehicle time (minutes), and out-of-vehicle time (minutes) in the model, the effect on the urban air traffic (UAM) share in this model was found that travel cost (won), in-vehicle time (minutes), and out-of-vehicle time (minutes) were in order, and the effect was greater when the travel cost (won) decreased than when it increased.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1222-1230
• /
• 2022

The rotor blade is an important component of a tidal stream turbine and is affected by a large thrust force and load due to the high density of seawater. Therefore, the performance must be secured through the geometrical and structural design of the blade and the blade structural safety to which the composite material is applied. In this study, a 1 MW class large turbine blade was designed using the blade element momentum (BEM) theory. GFRP is a fiber-reinforced plastic used for turbine blade materials. A sandwich structure was applied with CFRP to lay-up the blade cross-section. In addition, to evaluate structural safety according to flow variations, static load analysis within the linear elasticity range was performed using the fluid-structure interactive (FSI) method. Structural safety was evaluated by analyzing tip deflection, strain, and failure index of the blade due to bending moment. As a result, Model-B was able to reduce blade tip deflection and weight. In addition, safety could be secured by indicating that the failure index, inverse reserve factor (IRF), was 1 or less in all load ranges excluding 3.0*Vr of Model-A. In the future, structural safety will be evaluated by applying various failure theories and redesigning the laminated pattern as well as the change of blade material.

• Journal of Korea Water Resources Association
• /
• v.56 no.6
• /
• pp.381-392
• /
• 2023

Precipitation, runoff, and evapotranspiration are changing worldwide due to climate change and human activities. Because watershed runoff is an important component of the hydrological cycle, it is important to investigate the changes in watershed runoff for water resources management. This study collected observed data of runoff, precipitation, temperature, and evapotranspiration in the Geum River basin as well as their synthetic data according to Representative Concentration Pathways (RCP) scenarios, investigated the trend of hydro-meteorological variables using the Mann-Kendall test, and quantitatively evaluated the effects of climate change and human activities on the watershed runoff using the climate elasticity approach and the Budyko framework. The results indicated that the relative contribution of climate change and human activity to changes in runoff varies from region to region. For example, the watershed with the greatest contribution from climate change and human activity were the Yongdam Dam (#3001) basin and the Daecheong Dam (#3008) basin, respectively. Future climate change showed an increase in precipitation and temperature in both RCP 4.5 and 8.5 scenarios, resulting in changes in runoff in the Geum River basin from 44.8% to 65.5%, respectively. We concluded that the effect on watershed runoff can be separated into climate change and human activities, which will be important information in establishing sustainable water resource management plans.

• Journal of Naturopathy
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2019

Purpose: The purpose of this study was to investigate whether Qihyul-therapy was effective against subjects of bad Qihyul circulation who had narrowed muscles of the buttocks, a distorted body shape, or pain. Methods: Qihyul-therapy used. Results: The muscles of the buttocks remained almost untouched. The elasticity of the muscles restored. The skin tone brightened, and the anal muscle strengthened after Qihyul-therapy. The subject's body was shifted to the right by -7°. The right arm was about 6 cm longer than the left arm. But after correction, the right arm was about 5 cm shorter. The distorted body was almost balanced. After neck and shoulder correction, the distance between the collarbone and neck was 7~10 cm wider. After the pelvic correction, the pain in the buttocks was relieved, and the position of the hip joint returned correctly. The right leg that was turned 45° to the left was corrected, and the length became the same. Subjects had no knees attached, their right knees were up 5 cm above the left, and their ankles bent at an angle of 30 ° relative to the left, but after correction, the knees of the two legs stably attached. The height of the knee became the normal angle. Conclusion: If the Qihyul-therapy, the spine correction Qihyul-exercise and the pelvic correction Qihyul-exercise performed steadily, the deformed body shape restored adequately, and it is useful to prevent and cure related diseases by alleviating the pains.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.791-799
• /
• 2008

To build the system which has high utilization and usefulness for users, it is necessary to know the information type and use-demand that the use want. The purpose of this study is to forecast the preference and demand of utilization for bus information when bus information is offered through cellular phon. The accomplishments of this research are as follow : Firstly, importance on the level of individual factor and the value of change's figure can be evaluated, using preference analysis on bus information by conjoint analysis. Secondly, by establishing the use-demand model bus information using binary logit model, influence factor on whether or not the use of the user. Finally, ordered probit model was built by use behavior model in payment per call or per month of potential user of bus information. Through call times and sensitive analysis by payment methods, elasticity point, optimal payment fee, and use probability was analyzed. This study make application as basic to efficient bus information policy and to improve use rate of bus information in future because this study make it possible to get preference analysis, use-demand analysis and estimation of optimal payment fee which is reflecting various requirement in use of bus information user.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.9-20
• /
• 2023

For highway concrete structures, the deterioration of the structure is accelerated due to the increase in the use of deicing materials, and sectional repair work is being frequently carried out to restore performance. However, after the repair work, re-damage such as cracks, delamination, and poor bond performance is exhibited in the repaired sectional area. In this study, overseas repair material requirements were first analyzed, and present domestic requirements were improved repair material performance through field surveys of common concrete structures, laboratory experiments, and test construction on a disused concrete bridge. In addition, performancebased quality requirements were presented so that all materials that meet the required performance can be applied, and different test methods for each material were unified into concrete test methods for consistent test results analysis. The considered performance requirements were compression strength, bending strength, and bond strength for structural properties, and length change rate, crack resistance, thermal expansion coefficient, and elasticity coefficient were for dimensional behavior. For resistance to chloride penetration resistance and freeze-thaw resistance were presented as durability. The proposed requirements for concrete repair materials are expected to contribute to the improvement of the quality of concrete sectional repair work in Korea.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.258-267
• /
• 2008

The purpose of this study was to investigate the effects that body composition, nutrient intake, and biochemical indices have on skin status, as well as their associations with skin health status, by assessing 44 female university students. The subjects were classified into 3 groups according to skin sensitivity: sensitive skin (n=11), slightly sensitive skin (n=24), and normal skin (n=9). The study included anthropometric measurements and body composition analyses, dietary intake evaluations, blood chemical analyses, and skin health status assessments. Based on % body fat, the results indicated the subjects were moderately obese (29.6%). Obesity indices were not different among the groups, but the sensitive skin group tended to have higher skinfold thickness. Dry skin was determined as the skin type of all subjects. In the sensitive skin groups, U-zone and T-zone sebum were significantly lower (p<0.05), and spots were significantly higher (p<0.05) than in the normal skin group. In terms of nutrient intakes, the sensitive skin groups consumed significantly lower amounts of P and vitamins A and E (p<0.05). There were no significant differences in serum lipid fractions or total antioxidant status among the groups. In correlation coefficients analysis, skin elasticity had significant negative correlations with subscapular and midaxillary skinfold thickness, body protein, and body minerals (p<0.05). Wrinkling had positive correlations with triceps and thigh skinfold thickness (p<0.05). Skin evenness had negative correlations with energy intake, vitamins A, $B_1,\;B_2$, C, E, niacin, and zinc (p<0.05), as well as folate and P (p<0.01) and vitamin $B_6$ (p<0.001). A similar correlation tendency was observed for spots and nutrient intake, showing negative correlations with vitamins A, $B_6$, and E, as well as folate, Fe, and P. U-zone sebum showed significant positive correlations with serum levels of total cholesterol and triglycerides. From these findings, skin health status appears to be affected by both nutrient intake and body composition. Therefore, having a proper balance between dietary intake and body composition may influence skin health status in females with sensitive skin.

• Economic Analysis
• /
• v.25 no.2
• /
• pp.1-53
• /
• 2019

This paper examines monetary policy quantitatively in a two-agent and small-scale New-Keynesian economy with debt-constrained households that cannot smooth their consumption intertemporally and frictionlessly since highly indebted households are not allowed to borrow above a certain debt ceiling in incomplete financial markets without additional risk premiums due to information asymmetry between savers and borrowers. We find that, in the event of cost shocks, the asymmetric responses of borrowing households without, and saving households with, dividend incomes lead to different labor supplies and consumptions over heterogeneous households, and eventually to an extension of the monetary policy transmission channels. The income effect and low elasticity of the labor supply play key roles in such asymmetric responses over heterogeneous households. We also find that the social welfare in a flexible inflation targeting (FIT) monetary policy, in which both the inflation gap and the output gap are considered in an integrated manner when policy-making, is similar to that of the Ramsey optimal monetary policy (ROP), in which the shares of debt-constrained households, as well as all economic states, including both the inflation gap and output gap, are considered comprehensively for policy-making, and that it is greater than that of simple inflation targeting (SIT) monetary policy, in which only the inflation gap is considered mechanically for policy-making. Such social welfare implies that a FIT policy may still work even in an economy with a sizable number of debt-constrained households. Further, the responses of cost shocks to consumption and labor supply are dying out more slowly under FIT and ROP policies than under an SIT policy.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.268-274
• /
• 2023

Finite source inversion is performed with a Green's function matrix and geodetic coseismic displacement. Conventionally, the Green's function matrix is constructed using the Okada model (Okada, 1985). However, for more realistic earthquake simulations, recent research has widely adopted the physics-based model, which can consider various material properties such as elasticity, viscoelasticity, and elastoplasticity. We used the physics-based software PyLith, which is suitable for earthquake modeling. However, the PyLith does not provide a mesh generator, which makes it difficult to perform finite source inversions that require numerous subfaults and observation points within the model. Therefore, in this study, we developed CPInterface (COMSOL-PyLith Interface) to improve the convenience of finite source inversion by combining the processes of creating a numerical model including sub-faults and observation points, simulating earthquake modeling, and constructing a Green's function matrix. CPInterface combines the grid generator of COMSOL with PyLith to generate the Green's function matrix automatically. CPInterface controls model and fault information with simple parameters. In addition, elastic subsurface anomalies and GPS observations can be placed flexibly in the model. CPInterface is expected to enhance the accessibility of physics-based finite source inversions by automatically generating the Green's function matrix.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.594-602
• /
• 2023

To date, research on heavy floor impact noise has mainly been conducted. The reason is that in the case of lightweight floor impact noise, sufficient performance could be secured with only the floating floor structure and floor finishing materials. In the case of heavy floor impact noise in a floating floor structure, the reduction performance can be predicted to some extent by measuring the dynamic elasticity of the floor cushioning material. However, with the recent introduction of the post-measurement system, various floor structures are being developed. In particular, many non-floating floor structures that do not use cushioning materials are being developed. In floor structures where cushioning materials are not used, the finishing material will have a significant impact on lightweight floor impact noise. However, research on floor finishing materials is currently lacking. In this study, as a basic research on the development of various floor finishing materials for effective reduction of lightweight floor impact noise, various materials used as floor finishing materials for apartment complexes were selected, the sound insulation performance of lightweight floor impact noise was measured in an actual laboratory, and vibration characteristics were identified through simple experiments. The purpose was to confirm the predictability of light floor impact noise.