• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.414-414
• /
• 2009

나노스피어 리소그래피는 기존의 리소그래피 방법에 비해 나노 크기 패턴을 제작하는데 공정이 간단하며 재현성있게 대면적에 패터닝이 가능하다는 장점이 있다. 본 연구에서는 Vertical LED(V-LED)의 External quantum efficiency 향상을 위하여 나노스피어 리소그래 피를 이용하여 V-LED의 n-GaN 표면을 패터닝을 하였다. n-GaN 위에 Sputter를 이용하여 $SiO_2$를 증착 후 나노스피어를 스핀 코팅을 이용하여 단일막을 형성하였다. 그 후, 반응성 이온 식각 장치를 이용하여 나노스피어의 크기를 조절하고 $SiO_2$층을 식각하였다. 다음과 같은 공정 후 $SiO_2$층을 Mask층으로 하여 n-GaN 표면을 식각하였다. 실험 결과 나노스피어 리소그래피를 이용하여 V-LED의 External quantum efficiency 향상을 위한 n-GaN 표면의 패턴 제작이 가능함을 확인할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.71-78
• /
• 2012

Recently, it is increased to apply sensorless drive for BLDC (Brushless DC) motor to maximize operating efficiency and fuel efficiency to an electrical component of (H)EV. Especially, Electric vehicle component promotes a fuel efficiency enhancement by the carbon dioxide emissions regulation of a vehicle becoming the principal of the environmental pollution globally, the oil price hike that continued increasingly. We suggested the air compressor which applied BLDC motor for electric vehicle component and compared suggested BLDC motor with the conventional DC motor. The experimental results show that the driving efficiency was increased and was inproved compressive force by suggested BLDC motor.

• Journal of Distribution Research
• /
• v.1 no.2
• /
• pp.141-172
• /
• 1996

This study is to investigate global logistics strategies of Korean electronics companies. in terms of service parts. According to the survey, Korean electronics companies were pursuing multi-level global logistics network such as global, continental, national, regional and service center echelon for improving the efficiency of service parts global logistics. Especially there was a tendency of developing new continental distribution centers. And the companies were exploiting efficiency through inventory control by multi-level echelon, demand forecasting by the product life cycle and supply and service lead time management. But there were some insufficient factors for the efficiency of global logistics operation at the construction of worldwide real time logistics information system and pursuit of the efficiency on the whole network including subcontractors. For the future competitive advantage of the Korean electronics companies, the following are suggested: 1) the establishment of arranged logistics channel adjusting each company's global strategy, 2) the construction of worldwide real time logistics information system, 3) the reengineering of all logistics procedures such as order processing, shipping, inventory control, etc., 4) the enhancement of the ratio of the supply from the external companies and the internal manufacturing subsidiaries at each continent, 5) and the pursuit of operational internalization of external subcontractors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1569-1572
• /
• 2007

A two-dimensional fluid simulation code has been developed in order to investigate discharge phenomena and to improve plasma luminous efficiency in a Hg flat fluorescent lamp (FFL) for an LCD backlight unit. In this study, the method of a two-dimensional fluid simulation for FFL is explained and the simulation results of Hg-Ar-Ne mixture gas are presented for the enhancement of the luminance efficiency. The effects of various parameters, such as driving voltage, frequency, and gas mixture ratio, are investigated. The luminance efficiency increased with increasing fraction of mercury but the increasing fraction of argon did not affect the efficiency much.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.513-516
• /
• 2008

The luminance efficiency of the red organic light-emitting devices fabricated utilizing a double electron transport layer (ETL) consisting of an Al-doped and an undoped layer was investigated. The Al atoms existing in the ETL acted as hole blocking sites, resulting in an increase in the luminance efficiency.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2010

An exergy analysis is carried out for the regenerative gas turbine cycle which has a potential of enhanced thermal efficiency and specific power owing to the more possible water injection than that of inlet fogging under the ambient conditions. Using the analysis model in the view of the second law of thermodynamics, the effects of pressure ratio, water injection ratio and ambient temperature are investigated on the performance of the system such as exergetic efficiency, heat recovery ratio of recuperator, exergy destruction or loss ratios, and on the optimal conditions for maximum exergy efficiency. The results of computation for the typical cases show that the regenerative gas turbine system with afterfogging can make a notable enhancement of exergy efficiency.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.123-127
• /
• 2005

The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.677-684
• /
• 2020

In this paper, the energy efficiency of a 4H-SiC UMOSFET with a local floating superjunction (LFS UMOSFET) was compared with a conventional P-shielding UMOSFET. For analysis, P-shielding UMOSFET and LFS UMOSFET were modeled for energy loss and junction temperature. As a result, LFS UMOSFET showed switching loss reduction of 20.6%. In addition, it was confirmed that LFS UMOSFET is applied to a 3-phase inverter, resulting in 33.2% lower power efficiency and 28.1% lower junction temperature than P-shielding UMOSFET. Electrical characteristics were simulated using Sentaurus TCAD, and the power circuit was simulated with the modelled UMOSFET using PSIM, a power circuit simulator.

• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.9-14
• /
• 2014

We numerically investigate the effect of sunlight polarization on the absorption efficiency of V-shaped organic solar cells (VOSCs) using the finite element method (FEM). The spectral distribution of absorbance and the spatial distribution of power dissipation are calculated as a function of the folding angle for s-and p-polarized light. The absorption enhancement caused by the light-trapping effect was more pronounced for s-polarized light at folding angles smaller than $20^{\circ}$, where s-polarized light has a relatively larger reflectance than p-polarized light. On the other hand, the absorption efficiency for p-polarized light is relatively larger for folding angles larger than $20^{\circ}$, where the smaller reflectance at the interface of the VOSC is more important in obtaining high absorption efficiency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.589-594
• /
• 2016

P3HT:PCBM bulk heterojunction solar cells added with ferroelectric polymer were fabricated and characterized. By incorporating P3HT:PCBM solar cell with P(VDF-TrFE) ferroelectric additive, the power conversion efficiency was increased up to nearly 50%. Photoacoustic analysis on this phenomena was carried out for the first time. Through this study, we find that the ferroelectricity of the polymer additive plays the key role in the enhancement of the power conversion efficiency of the organic solar cell by suppressing the non-radiative recombination of charge transfer exciton more effectively.