Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Brushless DC Motor for 0.5[kW] Air Compressor of Electric Vehicle

전기자동차용 0.5[kW]급 공기압축기의 브러시리스 직류전동기 개발

  • 한만승 (전남대학교 전기공학과) ;
  • 홍성렬 ((주)고아정공 Motor 기술연구소) ;
  • 조주희 (전자부품연구원 디지털컨버전스연구센터) ;
  • 이상훈 (한국승강기 대학 승강기 전기설계과) ;
  • 박성준 (전남대학교 전기공학과) ;
  • 김대경 (순천대학교 전기제어공학과)
  • Received : 2012.06.01
  • Accepted : 2012.07.19
  • Published : 2012.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, it is increased to apply sensorless drive for BLDC (Brushless DC) motor to maximize operating efficiency and fuel efficiency to an electrical component of (H)EV. Especially, Electric vehicle component promotes a fuel efficiency enhancement by the carbon dioxide emissions regulation of a vehicle becoming the principal of the environmental pollution globally, the oil price hike that continued increasingly. We suggested the air compressor which applied BLDC motor for electric vehicle component and compared suggested BLDC motor with the conventional DC motor. The experimental results show that the driving efficiency was increased and was inproved compressive force by suggested BLDC motor.

Keywords

References

  1. Sang-Taek Lee, Ju-Hee Cho, Dae-Kyong Kim, "Trends in Development of Electrical Traction systems", Journal of KIPE, vol. 16 no.2 , pp.32-37, 2011. 4.
  2. C. C. Chan and K. T. Chau, Modern Electric Vehicle Technology, Oxford, U.K.: Oxford Univ. Press, 2011.
  3. M. Eshani, K. M. Rahman, and H. A. Toliyat, "Propulsion system design of electric and hybrid vehicles," IEEE Trans. Ind. Electron., vol. 44, no. 1, pp. 19-27, 1997. https://doi.org/10.1109/41.557495
  4. Duane Hanselman, Brushless Permanent Magnet Motor Design, The Writers' Collective, 2003.
  5. Dae-Kyong Kim, Kwang-Woon Lee, Byung-Il Kwon, "Commutation torque ripple reduction in a position sensorless brushless DC Motor drive," IEEE Trans. On Power Electronics, vol. 21, no. 6, pp. 1762-1768, Nov. 2006. https://doi.org/10.1109/TPEL.2006.882918
  6. Kwang-woon Lee, Dae-kyong Kim, Byung-Taek Kim, Byung-il Kwon, "A Novel Starting Method of the SPM-type BLDC Motors without Position Sensor for Reciprocating Compressor", IEEE Trans. on Industry Applications, vol. 44, no. 1, Jan./Feb. 2008.
  7. Seung-gun Lee , Dae-Kyong Kim,, Seung-Hak Yang , Young-Cheol Lim, "A Study on Low-Cost Sensorless Drive of Brushless DC Motor for Compressor Using Random PWM", Journal of KIIEE vol. 22, no. 10, pp.97-103, 2008. 10.
  8. Jang-young Choi, Hyung-il Park, Seok-Myeong Jang, Sung-Ho Lee, "Design and Analysis of Surface-Mounted PM Motor of Compressor for Electric Vehicles Applications according to Slot/Pole Combinations", Transactions of KIEE vol. 60, no.10, pp.1846-1857, 2011. 10.
  9. Z. Q. Zhu, Z. P. Xia, L. J. WU and G. W. Jewell, "Influence of slot and pole number combination on radial force and vibration modes in fractional slot PM brushless machines having single- and double- layer winding," IEEE ECCE 2009, pp. 3443-3450, 2009.