• IE interfaces
• /
• v.19 no.2
• /
• pp.124-132
• /
• 2006

The system under study is a single item, multi-echelon distribution system with a capacitated production facility. All the nodes at the downstream ends are demand-sites, i.e., ordered items are delivered to the customers from the node. Also any transshipment depots in the midstream can be demand-sites as well. For a given planning period, at each of demand-site, demand is forecasted and known. Our objective is to minimize the average system cost per period which is the sum of holding and backorder costs in the entire network. Due to the capacity restrictions, it is difficult to establish efficient distribution planning. To overcome such a difficulty and obtain a reasonable and better solution, we convert this problem into a single machine earliness and weighted tardiness scheduling. We propose a simple but cost-effective heuristic for this problem. The experimental results showed that the proposed heuristic obtained much better solutions compared with another approach.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.5 no.1
• /
• pp.39-51
• /
• 1980

This paper deals with the problem of determining the capacity expansion timing and sizes of conduits and feeder cables for a given cable network configuration of a single exchange ares, which minimizes the present worth of total costs. The planning horizon is infinite and the demand of line pairs at each cabinet is assumed to be determininstically growing. As a solution method, the heuristic branch-and-bound algorithm of Freidenfelds and Mclaughlin is elaborated by adding details and some minor modifications, which generates a good near-optimal solution with far less computation than would otherwise be possible. We also develop a computer program, which is shown to be effective and efficient through the test run of an illustrative example.

• Industrial Engineering and Management Systems
• /
• v.3 no.2
• /
• pp.116-122
• /
• 2004

This paper presents a process plan selection model with multiple objectives. The process plans for all parts should be selected under multiple objective environment as follows: (1) minimizing the sum of machine processing and material handling time of all the parts considering realistic shop factors such as production volume, processing time, machine capacity, and capacity of transfer device. (2) balancing the load between machines. A multiple objective mathematical model is proposed and an evolutionary algorithm with the adaptive recombination strategy is developed to solve the model. To illustrate the efficiency of proposed approach, numerical examples are presented. The proposed approach is found to be effective in offering a set of satisfactory Pareto solutions within a satisfactory CPU time in a multiple objective environment.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.61-65
• /
• 2015

For effective distribution planning and operation, we need a reliable estimation of operation capacity. But it is difficult to ensure reliability due to the low accuracy of section load data, which is used as a basis in estimating the operation capacity. This paper discusses how to improve the accuracy of section load data by analyzing the existing method of estimating the section load, using statistical techniques to adjust the acquired data, and using the section load estimation algorithm to estimate the section load based on the adjusted data.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.1
• /
• pp.63-72
• /
• 1982

To maintain an optimum condition for the plant growth on upland soil, the irrigation planning after the natural rainfall should be given enormous considerations on the rainfall effectiveness. This study has been intended to develop the computer model for estimating the effec- tiveness of the rainfall. The computer model should also estimated the infiltration due to the rainfall and the soil moisture deficiency at the root zone of the plant. For this purpose, the experiments of infiltration using rainfall simulator and the observations of the change of soil moisture content before and after rainfall were carried out. Needed input data for the developed model include final infiltration capacity and field capacity of the soil, porosity of the top soil, root depth of the plant, rainfall intensity and duration, and the Horton's decay coefficient. Among the needed input data for the developed model, final infiltration capacity and Horton's decay coefficient were determined by the experiments of infiltration. And from the result of the experiments, it is found that there is a great correlation between initial infiltration capacity and initial moisture content. And it is also found that the infiltration due to rainfall can be estimated with the Horton's equation. The developed model was tested by the experimental data with two rainfall intensities. Tests were conducted on the different root depths at each rainfall. Observed and estimated effective rainfalls were found to have great correlation. The result of the experiments showed that the effectiveness of the rainfall were 100%, so the comparisons were conducted by the comsumption rates of infiltration at each depth. The developed model can be also used for estimating the deficiency of rainfall, if the rainfall is not sufficient to the needed soil moisture. But, test was not carried out.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.6
• /
• pp.3-12
• /
• 2008

It is important to estimate accurate effective rainfall to analyse flood flow and long-term runoff for the rational planning, design, and management of water resource. The initial abstraction is also important to estimate effective rainfall. The Soil Conservation Service (SCS) has developed a procedure and it has been most commonly applied to estimate effective rainfall. But the SCS method still has weak points, because of unnatural assumptions such as antecedent moisture conditions and initial abstraction. The coefficient of initial abstraction(K) is depending on the soil moisture condition and antecedent rainfall. The maximum storage capacity of Umax which is calibrated by stream flow data in the proposed watershed was derived from the DAWAST(DAily WAtershed STreamflow) model. The values of K obtained from 69 storm events at the five watersheds are ranging from 0.133 to 0.365 and its mean value is 0.207. Effective rainfall could be estimated more reasonably by introducing new concept of initial abstraction. The equation of $K=0.076Sa^{0.255}$ was recommended instead of 0.2 and it could be applicable to the small-medium rural watersheds.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.1
• /
• pp.73-81
• /
• 2012

For planning and developing rural regions, it is very important to understand and utilize regional characteristics including social, demographic, and economic aspects. The purpose of this study is to find effective analysis techniques and provide a procedure design for mining regional characteristics in South Korea through reviewing and analyzing 41 related studies. The engaged research methods can be classified into five categories (PCA+CA, PCA, CA, GIS, and PCA+GIS) with the combination of three methodologies: principal component analysis (PCA), cluster analysis (CA), and geographical information system (GIS). The combination of PCA and CA occupied about 40 % of research methods used in related studies. The analysis tool of Korean Rural Information Supporting System (KRISS) is designed based on the outcomes of this study and applied to classify the regional capacity of agriculture using agricultural census data (2000) for evaluating its applicability.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.3
• /
• pp.61-68
• /
• 2013

Long-term runoff model can be used to establish the effective plan of water reources allocation and the determination of the storage capacity of reservoir. So this study aims at the development of monthly runoff model using artificial neural network technique. For this, it was selected multi-layer neural network(MLN) and radial basis function neural network(RFN) model. In this study, it was applied model to analysis monthly runoff process at the Wi stream basin in Nakdong river which is representative experimental river basin of IHP. For this, multi-layer neural network model tried to construct input 3, hidden 7, and output 1 for each number of layer. As the result of analysis of monthly runoff process using models connected with artificial neural network technique, it showed that these models were effective in the simulation of monthly runoff.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.4
• /
• pp.109-120
• /
• 2016

This study aims to assess vulnerability in urban thermal environments of Seoul by using indicators frequently used in previous studies as well as effective indicators for spatial planning like urban and environmental planning. For this purpose, fifteen indicators that influence urban thermal environments such as heat waves, urban heat island effects, and urban micro-climates were identified based on literature reviews. Indicators for presenting urban structure and spatial properties were included; for example, building volume as 'exposure to climate', buildings completed before 1980 as 'sensitivity', and green space areas as 'adaptive capacity'. Among them, twelve indicators were applied to assess vulnerability in urban thermal environments of Seoul by using a GIS spatial analysis combined with fuzzy logic. The results show that the Gangnam area is identified as more vulnerable to a heat environment as compared to the Gangbuk area. In the Gangnam area, Seocho-gu, Gangnam-gu, Dongjak-gu, Yeongdeungpo-gu, Gangseo-gu were relatively high in vulnerability, while Dongdaemun-gu, Gangbuk-gu, Gwangjin-gu, Jungrang-gu were relatively high in the Gangbuk area. Gwanak-gu, Dobong-gu, Eunpyeong-gu, and Nowon-gu, which include forested areas, have low vulnerability in the sectors of 'exposure to climate' and 'sensitivity' due to the impact of Gwanaksan and Bukhansan. However, some areas with high vulnerability like Seocho-gu and Gangnam-gu may have lower vulnerability if the indicator 'status of air conditioning' from the sector of 'adaptive capacity' is used. This study could support the establishment of a practicable thermal environment policy and spatial planning to reduce heat-related risks in the field of urban and environmental planning.