• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.62-72
• /
• 2004

In this paper. firstly, numerical results were compared with experimental results to verify accuracy of the results. It is found that the numerical results show good agreements with experimental result. Next, computations about flow within blades for design parameters such as radius of the pressure and suction side's curvature and pitch-chord ratio have been performed. It is found that the flow and performance characteristics mainly depend on shocks occurred at the leading edge of blades and the end of nozzle and separations occurred inside the flow passage. And shock of nozzle and separations depend upon area of flow passage and shocks of blade are affected by the number of blades occupied by a nozzle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.193-193
• /
• 2010

HIPIMS(High sputtering impulse magnetron sputtering)은 수십 ${\mu}s$의 짧은 pulse 동안 수kw의 매우 높은 파워를 인가할 수 있어 밀도 $10^{13}/cm^3$ 이상의 고밀도 플라즈마 방전이 가능하여 스퍼터된 타겟 이온들의 이온화율이 매우 높은 특징을 가진다. HIPIMS를 통해 증착한 박막의 경우 매우 치밀한 조직을 가지고 있어 기존 DC, Pulsed DC, RF 증착을 통한 박막에 비해 우수한 물성을 보여준다. 본 실험에서는 대면적의 고품위 Al:ZnO 박막을 증착하기위하여 HIPIMS 증착법을 사용하였다. 1000mm폭 타겟상에서 균일한 증착을 위하여 Balanced B-field, Unbalanced field를 각각 인가하여 실험하였다. 시뮬레이션을 통하여 타겟 중심부와 가장자리의 자기장을 결정하였으며, target edge에서의 증착율과 cathode erosion 방지를 위하여 원형 트랙형으로 보조 자석을 설치하였다. $Al_2O_3$(2wt%)가 첨가된 planar target을 사용하였고, power는 700 W~2 kW, 그리고 pulse 폭은 $50-150 {\mu}s$정도로 변화시켜 가면서 상온에서 증착하였다. 플라즈마 가스로는 Ar만을 사용하여 두께는 60-100 nm정도로 증착하였다. Plasma emission monitoring을 통해 측정한 결과 Balanced B-field 에 비해 Unbalanced B-field 조건 에서 스퍼터된 이온들의 균일도가 우수하였으며 증착된 박막의 균일도 또한 증가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.981-984
• /
• 2005

Recently, filtering methods for attenuating noise while preserving image details are in progress actively. And SM(standard median) fille. showed a great performance for noise removal in impulse noise environment but, it caused edge cancellation error So, variable methods that modified SM(standard median)filter have been proposed, and CWM(center weighted median) filter is representative. Also, there are several methods to improve the efficiency based on min/max operation in term of preserving detail and filtering speed. In this paper, we managed a pixel corrupted by impulsive noise using min/max value of the surrounding band enclosing a pixel, and compared the efficiency with exiting methods in the simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.213-215
• /
• 2021

With the development of IoT technology, various technologies such as artificial intelligence and automation are being grafted into industrial sites, and accordingly, the importance of data processing is increasing. In particular, a system based on a digital image may cause a malfunction due to noise in the image due to a sensor defect or a communication environment problem. Therefore, research on image processing has been continued as a pre-processing process, and an effective noise reduction technique is required depending on the type of noise and the characteristics of the image. In this paper, we propose a modified spatial weight filter to protect edge components in the impulse noise reduction process. The proposed algorithm divides the filtering mask into four regions and calculates the standard deviation of each region. The final output was filtered by applying a spatial weight to the region with the lowest standard deviation value. Simulation was conducted to evaluate the performance of the proposed algorithm, and it showed superior impulse noise reduction performance compared to the existing method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.361-366
• /
• 2006

A small supersonic wind tunnel was designed and built to study the flow characteristics of a supersonic impulse turbine cascade. The supersonic cascade with a 2-dimensional supersonic nozzle was tested for the leading edge chamfer angle $(\gamma)$ of the supersonic turbine that is the one of the turbine design parameter. Firstly, the flow was visualized by a single pass Schlieren system. Next, total and static pressure of the cascade were measured by a pressure scanning system. Finally, highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions, flow characteristics of the supersonic turbine were observed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.66-72
• /
• 2005

In this paper, a small supersonic wind tunnel is designed and built to study the flow characteristics of a supersonic impulse turbine cascade. The flow is visualized by means of a single pass Schlieren system. The supersonic cascade with 2-dimensional supersonic nozzle was tested for various blade leading edge shapes and gaps between the nozzle and cascade. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions are observed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.12 s.105
• /
• pp.1347-1354
• /
• 2005

The free vibration characteristics of Al cantilever square plates with a brass inclusion were analyzed experimentally and numerically The experimentally obtained natural frequencies and mode shapes were compared with the FEM analysis results. The impulse exciting method was used for experiment and ANSYS software package was used for FEM analysis. The natural frequencies obtained iron experiment and numerical analysis matched within $0\%$. It was found that the natural frequencies of the Al cantilever square plates with a brass inclusion decrease as the size of inclusion increases. For the third mode shape, comparing the nodal line of the Al plate and the Al plate with a inclusion, the mode shape showed the reversed quadratic curve. The natural frequencies of inclusion plate were decreased as the location of inclusion moves from the clamped edge to the tree edge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1696-1705
• /
• 1996

The theory of stack filtering, which is a generalization of median filtering, is used to the detection of intensity edges in noisey images. The proposed approach, called the Difference of Estimates(DoE) approach, is a new formulation of a morphological scheme which has been very sensitive to impulse noise. In this approach, stack filters are applied to a noisy image to obtain local estimates of the dilated and eroded versions of the noise-free image. Thresholding the difference between these two estimates yields the binary edge map. We find that this approach yields results comparable to those obtained with the Canny operator for images with additive Gaussian noise, burt works much better when the noise is impulsive.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.34-40
• /
• 1999

In conventional color television systems color edges of highly saturated color pictures are deteriorated because of bandwidth limitation of the color-difference signal. In this paper a modified hue-weighted luminance demodulation method with low noise is proposed for the edge correction. The weighting coefficients are given by ratios of the gadient of color-difference signal to the gradient of band-limited luminance signal. Proposed method is theoretically complete for the 1st order lowpassed color-difference signals and well separated luminance/chrominance signal. Noise reduction technique is also considered because of impulse noise generation in the gradient ratio processing of noisy pictures. In computer simulation with noisy pictures proposed technique gives a visual effect of the bandwidth expansion and detail improvement in highly saturated color edge area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.213-221
• /
• 2004

A new method for design of two-channel finite-impulse response(FIR) quadrature mirror-image filter(QMF) banks with low reconstruction delay using weighting function is proposed. The weighting function used in this paper is calculated from the previous updated filter coefficients vector which is adjusted from iteration to iteration in the design of QMF banks. In this paper, passband and stopband edge frequency are used in design of QMF banks with low delay characteristic in time domain instead of specific frequency interval where the artifacts occur in conventional design method. The investigation of specific frequency interval where artifacts occur can not be required by using passband and stopband edge frequency. Some comparisons of performance are made with other existing design method to demonstrate the proposed method for QMF bank design. and it was observed that the proposed method using the weighted function and passband and stopband edge frequency improves the peak reconstruction error by 0.001 [dB], the peak-to-peak passband ripple by 0.003[dB], SNR with a white noise by 7[dB] and SNR with a step input by 32[dB], but with a reduction of the computational efficiency because of updating the weighting function over the conventional method in Ref [11].