• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2003년도 추계공동학술대회
• /
• pp.145-156
• /
• 2003

This paper for real time object tracking in this treatise detect histogram analysis that is accumulation value of binary conversion density and edge information and body that move by real time use of difference Image techniques and proposed method to object tracking. Firstly, we extract edge that can reduce quantity of data keeping information about form of input image in object detection. Object is extracted by performing difference image and binarization in edge image. Area of detected object is determined by threshold value that divide sum of horizontal accumulation value about binary conversion density by value that add horizontalityㆍverticality maximum accumulation value. Object is tracked by comparing similarity with object that is detected in previous frame and present frame. As experiment result, proposed algorithm could improve the object detection speed, and could track object by real time and could track local movement.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.307-310
• /
• 2002

A two-dimensional numerical method for inviscid two-fluid flows with evolution of density interface is developed, and an initially stationary two-dimensional fluid sheet surrounded by another fluid is studied. The Interface between two fluids is modeled as a vertex sheet, and the flow field u÷th the evolution of interface is solved by using vortex-in-cell/front-tracking method. The edge of the sheet Is pulled back into the sheet due to surface tension and a blob is formed at the edge. This blob and fluid sheet are connected by a thin neck. In the inviscid limit, such process of the blob and neck formation is examined in detail and their kinematic characteristics are summarized with dimensionless parameters. The edge recedes at $V=1.06({\sigma}/{\rho}h)^{0.5}$ and the capillary wave Propagating into the fluid sheet must be considered for bettor understanding of the edge receding.

• ETRI Journal
• /
• 제31권2호
• /
• pp.240-242
• /
• 2009

A computationally efficient implementation of the progressive edge-growth algorithm is presented. This implementation uses an array of red-black (RB) trees to manage the layered structure of check nodes and adopts a new strategy to expand the Tanner graph. The complexity analysis and the simulation results show that the proposed approach reduces the computational effort effectively. In constructing a low-density parity check code with a length of $10^4$, the RB-tree-array-based implementation takes no more 10% of the time required by the original method.

• 정보학연구
• /
• 제8권2호
• /
• pp.77-84
• /
• 2005

In this paper, electromagnetic scattering problems by a resistive strip grating with tapered resistivity on a grounded dielectric plane according to strip width and spacing, relative permittivity and thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the Fourier-Galerkin Moment Method known as a numerical procedure. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The resistivity of resistive strips in this paper varies from zeroes at one edge to infinite at the other edge, then the induced surface current density on the resistive strip is expanded in a series of Jacobi polynomials of the order ${\alpha}=0.2,\;{\beta}=-0.2$ as a orthogonal polynomials. The numerical results of the geometrically normalized reflected power in this paper are compared with those for the existing perfectly conducting strip. The numerical results of the normalized reflected power for conductive strips case with zero resistivity in this paper show in good agreement with those of existing papers.

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.183-188
• /
• 2013

본 논문에서는 모서리 경계조건을 만족하는 접지된 2개의 유전체층 위의 완전도체띠 격자구조에 의한 TE (Transverse Electric)산란 문제를 수치해석 방법인 FGMM (Fourier Galerkin Moment Method)를 이용하여 해석하였다. TE 산란에 대하여 유도되는 표면 전류밀도는 스트립 양 끝에서 0의 값이 기대되며, 이때 도체띠에 유도되는 표면 전류밀도는 2종 Chebyshev 다항식과 적절한 모서리 경계조건을 만족하는 함수의 곱의 급수로 전개하였다. 수치결과들은 기존 논문들과 비교하여 급속한 수렴해와 좋은 일치를 보였다.

• 한국분말재료학회지
• /
• 제3권2호
• /
• pp.104-111
• /
• 1996

In order to obtain homogeneous and high quality products in powder compaction forging process, it is very important to control stress, strain, density and density distributions. Therefore, it is necessary to understand quantitatively the elasto-plastic deformation and densification behaviors of porous metals and metal powders. In this study, elasto-plastic finite element method using Lee-Kim's pressure dependent porous material yield function has been used for the analysis of three dimensional indenting process. The analysis predicts deformed geometry, stress, strain and density distribution and load. The calculated load is in good agreement with experimental one. The calculated results do not show axisymmetric distributions because of the edge effect. The core part which is in contact with the indentor and the outer diagonal edge part are in compressive stress states and the middle part is in tensile stress state. As a results, it can be concluded that three dimensional analysis is more realistic than axisymmetric assumption approach.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1115-1120
• /
• 2003

In this paper, we investigated the position dependent stress distribution of indium-tin-oxide (ITO) film on Polycarbonate (PC) substrate by external bending force. It was found that there are the maximum crack density at the center position and decreasing crack density as goes to the edge, In accordance with crack distribution, it was observed that the change of electrical resistivity of ITO islands is maximum at the center and decrease as goes to the edge. From the result that crack density is increasing at same island position as face plate distance (L) decreases, it is evident that the more stress is imposed on same island position as L decreases.

• 광물과 암석
• /
• 제34권2호
• /
• pp.121-131
• /
• 2021

마그네슘(magnesium; Mg)은 탄산염 광물이 침전된 과거의 환경 조건을 유추하기 위한 지화학 지시자로 활용되어오고 있다. Mg를 신뢰도 높은 지화학 지시자로 활용하기 위해서는 Mg의 화학종을 근거로 한 Mg의 광물 함유 기작이 반드시 규명되어야만 하며, 관련 실험 연구들은 주로 고해상도(high resolution)의 방사광가속기(synchrotron) X-선 흡수 분광(X-ray absorption spectroscopy; XAS) 기법을 통해 Mg의 화학종을 유추한다. 그러나, Mg가 미량 함유된 광물의 XAS 스펙트럼 해석의 높은 불확실성 때문에 화학종 유추가 어려운 경우가 많다. 양자역학 밀도범함수이론(density functional theory; DFT)은 결정구조에 대한 흡수 스펙트럼을 예측할 수 있기 때문에, XAS 스펙트럼 해석의 불확실성을 줄일 수 있다. 이번 논문에서는 DFT 기반의 제일원리 내각 준위 분광법(ab initio core-level spectroscopy method)을 통해 Mg 규산염 및 (수)산화광물에 대한 Mg K-edge 흡수 스펙트럼을 계산하여 Mg의 배위 결합 환경을 나타내는 구조 인자와의 상관관계를 분석하였다. 계산 결과, DFT 계산으로 얻은 Mg 규산염 및 (수)산화물의 이론 Mg K-edge 흡수 스펙트럼은 기존 XAS 실험으로 얻어진 스펙트럼의 주요 형태를 상당 부분 재현해낼 수 있었다. 계산으로 얻은 광물의 제일원리 Mg K-edge 흡수 스펙트럼의 흡수-끝(absorption edge)과 평균 Mg-O 결합거리 및 Mg 유효배위수를 비교 분석한 결과, 약한 양의 상관관계를 보여주었다. 이번 연구 결과는 DFT 계산이 다양한 광물 내 Mg의 화학종에 대한 표준 스펙트럼 세트를 제공할 수 있는 강력한 도구임을 보여주며, 추후 탄산염 광물에 함유된 정확한 Mg의 화학종을 동정하는데 DFT 계산이 큰 역할을 할 수 있음을 제시한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권2호
• /
• pp.59-64
• /
• 2001

The distribution of current in the conductors influenced by the armature geometry and velocity is an important parameter for determining performance of an electromagnetic launcher(EML). the electric current in the early launching stage tends to flow on the outer surfaces of the conductors, resulting in very high local electric current density. However, the tendency for current to concentrate on the surface is driven by the velocity skin effect later in launching stage. The high current density produces high local heating and, consequently, increases armature wear which causes several defects on EML system. This paper investigates the effects of rail/armature geometry on current density distribution, launcher inductance gradient (L'), and contact force. Three geometrical parameters are used here to characterize the railgun system. These are the ratio of contact length to root length, relative position of contact leading edge to root trailing edge, and the ratio of rail overhang to the rail height. The distribution of current density, L', contact force between various configurations of the armature and the rail are analyzed and compared by using the EMAP3D program.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.85-88
• /
• 2001

Unlike rigid objects or This paper developes the algorithm for segmenting gaseous objects on an image plane. Unlike rigid objects or solid non-rigid objects, gaseous objects vary in density even within single-object regions and the edge intensity differs at different locations. So, an edge detector may detect only strong edges and detected edges may be an incomplete parts of an whole object's boundary. Due to this property of gaseous objects, it is not easy to distinguish the real edges of gaseous objects from the noisy-like edges such as leaves. Our algorithm uses two criteria of edge intensity and edge's line connectivity, then applies fuzzy set so as to obtain the proper threshold of the edge detector