• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.61-77
• /
• 2005

Statement of problem. The implant prosthesis has been utilized in various clinical cases thanks to its increase in scientific effective application. The relevant implant therapy should have the high success rate in osseointegration, and the implant prosthesis should last for a long period of time without failure. Resorption of the peri-implant alveolar bone is the most frequent and serious problem in implant prosthesis. Excessive concentration of stress from the occlusal force and biopressure around the implant has been known to be the main cause of the bone destruction. Therefore, to decide the location and angulation of the implant is one of the major considering factors for the stress around the implant fixture to be dispersed in the limit of bio-capacity of load support for the successful and long-lasting clinical result. Yet, the detailed mechanism of this phenomenon is not well understood. To some extent, this is related to the paucity of basic science research. Purpose. The purpose of this study is to perform the stress analysis of the implant prosthesis in the partially edentulous mandible according to the different nature locations and angulations using three dimensional finite element method. Material and methods, Three 3.75mm standard implants were placed in the area of first and second bicuspids, and first molar in the mandible Thereafter, implant prostheses were fabricated using UCLA abutments. Five experimental groups were designed as follows : 1) straight placement of three implants, 2) 5$^{\circ}$ buccal and lingual angulation of straightly aligned three implants, 3) 10$^{\circ}$ buccal and lingual angulation of straightly aligned three implants. 4) lingual offset placement of three implants, and 5) buccal offset placement of three implants. Average occlusal force with a variation of perpendicular and 30$^{\circ}$ angulation was applied on the buccal cusp of each implant prosthesis, followed by the measurement of alteration and amount of stress on each configurational implant part and peri-implant bio-structures. The results of this study are extracted from the comparison between the distribution of Von mises stress and the maximum Von mises stress using three dimensional finite element stress analysis for each experimental group. Conclusion. The conclusions were as follows : 1. Providing angulations of the fixture did not help in stress dispersion in the restoration of partially edentulous mandible. 2. It is beneficial to place the fixture in a straight vertical direction, since bio-pressure in the peri-implant bone increases when the fixture is implanted in an angle. 3. It is important to select an appropriate prosthodontic material that prevents fractures, since the bio-pressure is concentrated on the prosthodontic structures when the fixture is implanted in an angle. 4. Offset placement of the fixtures is effective in stress dispersion in the restoration of partially edentulous mandible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.88-94
• /
• 2018

Recently, digital implant systems are expanding its influence in dental area. Due to technical improvement, they jumped over their limits nowadays. We can use these newest systems to treat edentulous patient, from implant surgery to fabrication of prosthesis. In this case, The patient was a fifty years old female. She had a full edentulous ridge on mandible and wanted to reconstruct occlusion with using implants. We planned to use digital implant system with "all-on-4" concept on mandible and produced surgical guide for flapless implant surgery. After the surgery, we tried to fabricate full arch prosthesis just using a digital devices and confirmed satisfying result.

• Journal of Periodontal and Implant Science
• /
• v.50 no.1
• /
• pp.28-37
• /
• 2020

Purpose: The aim of our study was to determine the prevalence and degree of lingual concavities in the first molar region of the mandible to reduce the risk of perforating the lingual cortical bone during dental implant insertion. Methods: A total of 163 suitable cross-sectional cone-beam computed tomography images of edentulous mandibular first molar regions were evaluated. The mandibular morphology was classified as a U-configuration (undercut), a P-configuration (parallel), or a C-configuration (convex), depending on the shape of the alveolar ridge. The characteristics of lingual concavities, including their depth, angle, vertical location, and additional parameters, were measured. Results: Lingual undercuts had a prevalence of 32.5% in the first molar region. The mean concavity angle was 63.34°±8.26°, and the mean linear concavity depth (LCD) was 3.03±0.99 mm. The mean vertical distances of point P from the alveolar crest (Vc) and from the inferior mandibular border were 9.39±3.39 and 16.25±2.44, respectively. Men displayed a larger vertical height from the alveolar crest to 2 mm coronal to the inferior alveolar nerve (Vcb) and a wider LCD than women (P<0.05). Negative correlations were found between age and buccolingual width at 2 mm apical to the alveolar crest, between age and Vcb, between age and Vc, and between age and LCD (P<0.05). Conclusions: The prevalence of lingual concavities was 32.5% in this study. Age and gender had statistically significant effects on the lingual morphology. The risk of lingual perforation was higher in young men than in the other groups analyzed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.517-538
• /
• 1995

Dental implantation is a method restoring missing teeth, especially in the case of severely resorbed edentulous patient. But the direct contact between bone and implant surface, induces stress concentration to the bone and eventually becomes a cause. The purpose of this study was to compare the stress distribution patterns between following two cylindrical implant models. One group has implant apex located in the inferior cortical bone and the other in the cancellous bone. Anterior edentulous mandible was modeled with two dimensional 953,878 nodes, 995,918 elements and compared the deflection and stress distribution under the 70 N,4 load cases for 26 models having variant mandibular height and length. The result were as follows; 1. The stress concentration was more affected by the height of the mandible than implant length. 2. Bicortication mitigates the stress of upper cortical and cancellous bone area at the same height of the mandible 3. Perforation of the inferior mandibular cortex significant stress concentration. 4. Stud type porstheses induced less stress concentration to the cortical and cancellous bone than bar type prostheses. 5. Stress of implant apex for stud type was larger than that of bar type.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.116-120
• /
• 2012

Various options have been introduced for the selection of implant overdenture attachments. Attachment wear due to the repeated insertion and removal of dentures has caused problems such as decreased retention and the requirement for suprastructure remanufacturing. In these cases, a Locator bar system was applied using the drill and tapping technique to achieve total retrievability. In a 55-year-old female patient who showed three degrees of mobility in most of her teeth due to severe alveolar bone loss, a complete denture in the maxilla and an implant supported type overdenture in the mandible were planned after extracting all the remaining teeth. Six implants were placed from canine region to the distal molar region, and the locator was connected to the milled bar using the drill and tapping technique. For a 61-year-old female edentulous patient who complained of poor retention with old denture, a complete denture in the maxilla and an implant-tissue supported type overdenture in the mandible were planned. Four implants were placed in front of mental foramen, and the Locator was also connected to the Hader bar using the drill and tapping technique. With this technique, female parts can be easily replaced, and retention can be continuously maintained.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.133-138
• /
• 2007

Purpose: The purpose of this study was to evaluate the morphologic features of posterior edentulous mandible for Korean patients using cross-sectional CT images. Materials and Methods: Computed tomographic cross-sectional views taken in 2004 and 2005 at Seoul National University Dental Hospital were analyzed by an oral and maxillofacial radiologist. Four indices were measured to meet the purpose of this study: 1) the horizontal distance between the alveolar crest and mandibular canal (Type), 2) the angle of the mandibular long axis (Angle), 3) the bucco-lingual location of mandibular canal, and 4) the depth of the submandibular fossa. The averages and standard deviations of the measurements were compared according to the location (the first and second molar area) and sex of the patients. Results: Statistically significant difference was found in Type, Angle, and submandibular fossa depth between the first and second molar area (p<0.05). However, there was no significant difference between men and women in any of the measured indices. Most of the mandibular canals were located in lingual side of posterior mandible. Conclusion: More care should be taken when an implant is installed on the mandibular second molar area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.760-768
• /
• 2007

Statement of problem. Conventional denture treatment for totally edentulous patients is associated with a variety of functional and psychosocial problems. The placement of implants in the anterior region of the maxilla and mandible and the fabrication of an implant-retained overdenture might solve these problems. Purpose. This study compared the marginal bone loss around the implant and evaluated the implant survival rate and complications in patients treated with overdentures retained by implants for 2 years. Material and methods. Patients who had received implant-retained overdentures using a Dolder bar at Samsung Medical Center from January 1999 to June 2005 and had participated in the annual recall programs for two years were selected for this study. A total of 18 patients and 56 $Br{\aa}ne-mark\;system^{(R)}$ implants were used, and their data were reviewed. Evaluations of the survival rate, bone quality, marginal bone loss, and complications were performed. The data on the Dolder bar length and clip length were measured. The change in marginal bone loss and the correlation between the marginal bone loss and bar length, clip length, or bone quality were investigated. Results. Implants placed in this study showed a 100% survival rate. The average annual bone loss was 1.12mm in the first year and 0.27mm in the second year in the maxilla, and 0.58mm in the first year and 0.22mm in the second year in the mandible. The marginal bone loss in the maxilla showed no significant association with those in the mandible. (P>.05). There was no significant difference in marginal bone loss around implants between the first and second year. (P>.05) There was no statistically significant relationship (P>.05) between the marginal bone loss and bone quality, clip length, or Dolder bar length. The Dolder bar length showed a high correlation with the clip length. (P<.05) Various complications were noted. Conclusion. These results confirmed the favorable outcome for patients treated with implant-retained overdentures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.513-517
• /
• 2008

Purpose: This study aimed to evaluate distribution and maximal value of mechanical stresses on the reconstruction plate, bridging mandibular symphysis defect, and to optimize the most appropriate locations of the plate to distribute the stress causing the fracture of the plate. Materials and methods: Four types of reconstruction were constructed by different number and location of the reconstruction plates on the 3 D finite element model (FEM) of a human edentulous mandible; Type I: one plate on the inferior border of the anterior mandible, Type II: one plate on the middle of the anterior mandible, Type III: one plate on the superior border of the anterior mandible, and Type IV: two plates on the inferior and superior border of the anterior mandible. Results: The results showed that the maximal stress of type I (234.29 Mpa) was lower than that of type II (260.91 Mpa) and type III (247.37 Mpa), but higher than that of type IV (186.64 Mpa). We could also observe that the stresses are tending to focus on the inner side and inferior part of the plate which connected proximal segment from the vertical load. Conclusions: On the basis of the findings, it was concluded that using a plate on the inferior border of mandible or two plates on the inferior and superior border of mandible are more favorable to distribute mechanical stresses, which could reduce the fracture of the plate.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.4
• /
• pp.317-320
• /
• 2016

A 47-year-old woman was referred for surgical treatment of osteomyelitis of the mandible. She had already undergone three previous surgeries. Pre-anesthetic airway evaluation predicted a difficult airway, due to the thin, retro-positioned mandible, tongue, and atrophic changes in the lips and soft tissue. We inserted packing gauzes in the buccal mucosa for easier mask fitting and ventilation. During direct laryngoscopic intubation with a nasotracheal tube (NTT), fracture of a thin mandible can easily occur. Therefore, we used a fiberoptic bronchoscope to insert the NTT. After surgery, we performed a tongue-tie to protect against airway obstruction caused by the backward movement of the tongue during recovery. The patient recovered without any complications. We determined the status of the patient precisely and consequently performed thorough preparations for the surgery, allowing the patient to be anesthetized safely and recover after surgery. Careful assessment of the patient and airway prior to surgery is necessary.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.217-226
• /
• 2020

Purpose: The purpose of this study was to analyze the quantity and quality of the mandibular anterior alveolar bone in terms of alveolar width, density, and total alveolar height (TAH) based on dental status, gender, and age. Additionally, this study aimed to quantitatively evaluate the available alveolar height for graft harvesting (AHGH) and examine its variability based on the aforementioned factors. Materials and Methods: This retrospective cone-beam computed tomographic study included a total of 100 subjects. On the basis of gender, dental status, and age, the scans were divided into 3 primary groups and 8 subgroups. The mandibular alveolar width and density were measured 5 mm mesial to the mental foramen bilaterally and at the midline. The TAH was measured at the midline, and the AHGH was measured as the midline distance between 5 mm apical to the root of the canines and 5 mm superior to the lower border. Results: The mandibular alveolar width was statistically similar between dentulous and edentulous patients (P>0.05). A significantly greater density was observed at the midline in edentulous patients (P<0.05). The TAH was significantly greater in edentulous male patients than in edentulous female patients (P<0.05). Dentulous and male patients had significantly greater AHGH than edentulous and female patients, respectively (P<0.05). Conclusion: Based on the data evaluated in this study, it can be concluded that the mandibular symphyseal area has adequate bone quality and quantity for bone graft harvesting for dental implant therapy.