• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.13-21
• /
• 2019

There are many cuts or natural rock slopes that remain stable for a long time in the natural environment with steep slopes ($65^{\circ}$ to $85^{\circ}$). In terms of design practice, the rock mass consisting of similar rock condition and geological structures is defined as a good continuum rock slope, and during the process of decision making angle of this rock slope, it will be important to establish the geotechnical properties estimating method of the continuum rock on the process of stability analysis in the early stages of design and construction. In this study, the stability analysis of a good continuum rock slope that can be designed as a steep slope proposed a practical method of estimating the shear strength by induced from the Hoek-Brown failure criterion, and in addition, the design applicability was evaluated through the stability analysis of steep rock slope. The existing method of estimating the shear strength was inadequate for practical use in the design, as the equivalent M-C shear strength corresponding to the H-B envelope changes sensitively, even with small variations in confining stress. To compensate for this problem, it was proposed to estimate equivalent M-C shear strength by iso-angle division method. To verify the design applicability of the iso-angle division method, the results of the safety factor and the displacement according to the change in angle of the cut slope constructed at the existing working design site were reviewed. The safety factor is FS=16~59 on the 1:0.5 slope, FS=12~52 on the 1:0.3 slope, most of which show a 10~12 percent reduction. Displacement is 0.126 to 0.975 mm on the 1:0.5 slope, 0.152 to 1.158 mm on the 1:0.3 slope, and represents an increase of 10 to 15%. This is a slightly change in normal proportion and is in good condition in terms of stability. In terms practical the working design, it was confirmed that applying the shear strength estimated by Iso-angle division method derived from the H-B failure criterion as a universal shear strength for a good continuum rock mass slope was also able to produce stable and economic results. The procedure for stability analysis using LEM (Limit Equilibrium Analysis Method) and FEM (Finite Element Analysis Method) will also be practical in the rock slope where is not distributed fault. The study was conducted by selecting the slope of study area as a good rock condition, establishing a verification for which it can be applied universal to a various rock conditions will be a research subject later on.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.41-63
• /
• 2017

FDI can either be absorbed in the production cycle with domestic investment and create an inducement effect or it can remain as an exogenous factor and increase the volatility of GDP. The purpose of this paper is to research these different impacts that FDI could have. For that, the endogenous growth theory was employed. The statistic method used are the panel model for sectoral analysis, and GARCH model and VAR for time series analysis. Myanmar was selected as this paper's research subject because it is one of countries which had a colossal amount of FDI inflow recently. The panel analysis did not confirm the causality between sectoral FDI and sectoral GDP. The reason for this could be in the lack of data, since sectoral data exists yearly only during 2006-2016. Therefore this study conducted the times series analysis. According to the results, during 2006 until 2010, it showed signs of GARCH but the effect of FDI on GDP was nonexistent, which means FDI was not integrated into the domestic production cycle but stayed in residual terms. During 2011 to 2016, FDI seemed to affect the growth of Myanmar's GDP. The estimation confirmed the existence of GARCH and the Granzer causality test confirmed that FDI influenced the GARCH, which signified FDI increased the volatility of GDP. The VAR analysis showed responses of GDP to FDI was small(about 0.0007). This research assumes that FDI can be divided in two parts: one part which can be assimilated in the domestic production cycle and the other where it stays outside of the production cycle. The former creates production inducement effect and the latter only increases the volatility of GDP. According to this study, the latter outweighs the former impact in Myanmar.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.55-75
• /
• 2018

In China, different from the private enterprises or the locally-administered state enterprises, central state-owned enterprises generally spread over cornerstone industry which is greatly influenced by the public policy, which results in the objective existence of government influence in their productive activities. As the strategic resource, listed companies controlled by central state-owned enterprises, mostly distributed in the lifeblood and security of key industries. Therefore, listed companies controlled by central state-owned enterprises' governance efficiency play an important role in optimal allocation of state-owned assets, improve capital operation, improve the return on capital, and maintain state-owned assets safety. As the immune systems of national governance, the government audit strengthen the supervision of listed companies controlled by central state-owned enterprises in case of the loss of state-owned assets and significant risk events occur, to ensure that the value of state-owned assets. As an important component of national governance, government audit produced in entrusted with the economic responsibility of public relationship. Government audit can play an important role in maintaining financial security and corruption, and also improve listed company's accounting stability and transparency. While government audit can improve governance efficiency and maintain state-owned assets safety, present literature is scarce. Under the corporate governance theory and the economical responsibility theory, the thesis select data from 2010-2017 to verify the relationship between government audit and listed companies controlled by central state-owned enterprises' corporate performance. Results show that listed companies controlled by central state-owned enterprises are more likely to be audited by government of poor performance. Results also show that the government audit will have a promoting effect on listed companies controlled by central state-owned enterprises, and through to the improvement of the governance efficiency will enhance its companies' value. The results show that China's government audit has appealing role in accomplishing central state-owned enterprises to realize the business objectives and in promoting the governance efficiency.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.339-345
• /
• 2018

The sugar beet cyst nematode (SBCN), Heterodera schachtii first detected in Taebaek, Gangwon-do in 2011, is one of the major plant parasitic nematodes that cause economic damage to the Chinese cabbage in highland regions. In addition, the distribution of clover cyst nematode (CCN), H. trifolii was confirmed in the highland Chinese cabbage cultivated regions in 2017. In order to investigate the spread of cyst nematodes, this study has been conducted since 2013 in the highland Chinese cabbage cultivation area. In addition, in 2017, the Real-Time PCR technique with the species-specific primer was used to investigate those two cyst nematodes and the soybean cyst nematode (SCN), H. glycines which is known for its distribution in Korea, focusing on the main production regions of highland Chinese cabbage cultivation. The number of infected fields in the Chinese cabbage plantation in highland increased every year to confirm distribution in Taebaek, Samcheok, Jeongseon and Gangneung in 2017, and the cumulative number of infection fields reached 245 by 2017. Of the 41 possible cyst nematode samples for PCR analysis, 61% were CCN, only 9.8% of the SBCN and 29.3% of the SCN were identified. Therefore, some of the previously known SBCN or CCN discoveries are likely to have been infected with SCN. It is believed that the CCN needs to be controlled in the future as CCN have been found to be dominant species in the highland Chinese cabbage plantation regions.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.85-97
• /
• 2019

It can be observed that steep slopes ($65^{\circ}$ to $80^{\circ}$) consist of rock masses were kept stable for a long time. In rock-mass slopes with similar ground condition, steeper slopes than 1 : 0.5 ($63^{\circ}$) may be applied if the discontinuities of rock-mass slope are distributed in a direction favorable to the stability of the slope. In making a decision the angle of the slope, if the preliminary rock mass conditions applicable to steep slope are quantitatively setup, they may be used as guidance in design practice. In this study, the above rock mass was defined as a good continuum rock mass and the quantitative setup criterion range was proposed using RMR, SMR and GSI classifications for the purpose of providing engineering standard for good continuum rock mass conditions. The methods of study are as follows. The stable slope at steep slopes ($65^{\circ}$ to $80^{\circ}$) for each rock type was selected as the study area, and RMR, SMR and GSI were classified to reflect the face mapping results. The results were reviewed by applying the calculated shear strength to the stable analysis of the current state of rock mass slope using the Hoek-Brown failure criterion. It is intended to verify the validity of the preliminary criterion as a rock mass condition that remains stable on a steep slope. Based on the analysis and review by the above research method, it was analyzed that a good continuum rock mass slope can be set to Basic RMR ${\geq}50$ (45 in sedimentary rock), GSI and SMR ${\geq}45$. The safety factor of the LEM is between Fs = 14.08 and 67.50 (average 32.9), and the displacement of the FEM is 0.13 to 0.64 mm (average 0.27 mm). This can be seen as a result of quantitative representation and verification of the stability of a good continuum rock mass slope that has been maintained stable for a long period of time with steep slopes ($65^{\circ}$ to $80^{\circ}$). The setup guideline for a good continuum rock mass slope will be able to establish a more detailed setup standard when the data are accumulated, and it is also a further study project. If stable even on steep slopes of 1 : 0.1 to 0.3, the upper limit of steep slopes is 1 : 0.3 with reference to the overseas design standards and report, thus giving the benefit of ensuring economic and eco-friendlyness. Also, the development of excavation technology and plantation technology and various eco-friendly slope design techniques will help overcome psychological anxiety and rapid weathering and relaxation due to steep slope construction.

• Food Science and Industry
• /
• v.52 no.2
• /
• pp.188-201
• /
• 2019

In the past, food additives were classified and managed as chemical synthetic and natural additives according to the manufacturing process, but it was difficult to confirm the purpose or function of food additives.CODEX, an internationalstandard, classifies food additives according to their practical use, based on scientific evidence on the technical effects of food additives, instead of classifying them as synthetic or natural. Therefore, very recently, the food additive standards in Korea have been completely revised in accordance with these global trends. Currently, the classification system of food additives is divided into 31 uses to specify their functions and purposes instead of manufacturing methods. Newer revision of the legislative framework for defining and expanding the scope of the Act as an enlarged area is required. Competition for preempting new food products based on bio-based technology is very fierce in order to enhance the safety of domestic people and maximize the economic profit of their own countries. In this age of infinite competition, it is very urgent to revise or supplement the current regulations in order to revitalize the domestic food industry and enhance national competitiveness through the development of food additives using new biotechnology. In this report, current laws on domestic food ingredients, food additives and manufacturing methods, and a comparison of domestic and foreign advanced countries' regulations and countermeasures strategies were reviewed to improve national competitiveness of domestic advanced biotechnology-based food additives industry.

• Korean Journal of Comparative Education
• /
• v.27 no.4
• /
• pp.127-154
• /
• 2017

EIU has evolved diversely depending on the national environment and culture on the basis of the philosophy of individual human rights and world peace articulated in the "1974 Recommendation on EIU". However, the global environment surrounding EIU has been changed socially, economically, culturally and ecologically in the 21st century, and therefore it is necessary to raise the following questions: Is the concept of EIU initiated for international understanding and cooperation for world peace in the 20th century still valid in the 21st century? Which direction should we take in order for EIU to be efficient in the globalized world? To answer these questions, this study reviewed and analyzed the historical development and current trends of the EIU in the regions of Europe, North America, Asia Pacific area, and Africa. For the empirical study, thirty-four experts in EIU selected from the four regions were interviewed by the researchers. Based on the interviews and the related literature review, it was found that the diverse terms of EIU were used in the four regions and the focus on EIU was different depending on the geographical, historical and social environment of each region. But, despite of the diversity in terminology in EIU, human rights, peace, equity and social justice which are emphasized by UNESCO, were universally taught in EIU. The EIU in these regions is currently dealt with in school education, social education and lifelong education, and particularly global citizenship allowing multiple identities is importantly treated together with citizenship education. Another important aspect of EIU that was commonly found in these four regions was that global citizenship education for solving global problems was coexistent with the reinforcement of nationalism for the economic competency of each nation in a globalized world. The issue of global inequality was particularly dealt with in EIU, and the teaching of voluntary civic involvement and responsibility were particularly emphasized in EIU. Based on these research findings, the study proposes "glocalism", connecting global issues with local issues for solving global problems, as a new approach to the EIU of the 21st century.

• (The)Study of the Eastern Classic
• /
• no.32
• /
• pp.425-441
• /
• 2008

Most of Korea's Kyungmaedorock(auction book: 競賣圖錄) and pictorial record of exhibitions in the modern times were usually published in the 1930s. Although 1930s were periods of the Great Depression when economic slump continued because of the aftereffect of the slump in the stocks issued by the US in 1929, during this period, Japan began regular continental invasion starting from invasion of the northeastern area of China. To curio dealers, the 1930s were 'boom period of curio transaction' and in urban cultural aspects, the period is evaluated as the one when the first step of modernism was formed. Collection, photo-printing and arrangement of the data related to modern exhibitions including the Auction Book being published at that time are very important because they enable us to know characteristics of fine arts in the transition period from paintings & writings to fine arts in addition to enabling us to revert the circulation history of our paintings & writings and curios. Furthermore, these data will become important data for reconstitution of the circulation history of the Eastern Asia's modern art works. Although the pictorial record of Joseon's Exhibitions of Chinaware and Wooden Works(朝鮮陶磁木工展) is a small and thin one, it records our country's high level chinaware and wooden works. Although we can't know the exact time for 'Joseon's exhibitions of chinaware and wooden works', they are assumed to have been held in Tokyo, Japan in the 1930s and there seems to have been sale of works, too. As such, studies of the books such as the auction book and exhibitions under Japanese imperialism have the first importance in the fact that through which we can examine the course of outflow of our art works to Japan. Furthermore, they can be studies of art-sociology that examine flow and phase of recognition and taste of art works of those days. And from now on, comparative studies of auctions and exhibitions being held in Japan such as Tokyo, Osaka and etc. as well as art markets in Seoul during modern times would also be necessary.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.23-28
• /
• 2021

This experiment was conducted to compare the seed productivity of Spring sown Italian ryegrass(Lolium multiflorum Lam.) depending on the seeding rates(20kg/ha, 30kg/ha, 40kg/ha) in Gangwon region. The experiment was a randomized block design with three replications. The test plots were located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian ryegrass variety was 'Greencall' developed by the National Institute of Animal Science, RDA. Italian Ryegrass was sown on March 26, 2020, and the seed harvesting was on the 60th day(2 July) from heading date. The heading date was May 8 with no difference, There were no significant differences in the agronomic characteristics including plant height. 30kg/ha seed rate was the highest at 146.8 seed/spike and 40kg/ha seed rate was the lowest at 114.7 seed/spike for the number of seeds per spike. The number of spikes per unit area was the highest in 40kg/ha at 886/㎡ and the lowest in 20kg/ha at 750/㎡. The yield of seed and straw was the highest in 40kg/ha at 1,288kg/ha and 2,970kg/ha respectively, but there was no difference. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was evaluated.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.4
• /
• pp.221-226
• /
• 2020

This experiment was conducted to compare the seed productivity of the Italian ryegrass(Lolium multiflorum Lam.) varieties sown in the spring in Gangwon region. The experiment was randomized block design with three replications. The Experimental field was located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian Ryegrass varieties were 'Greenfarm', 'Greencall' and 'Kowinearly' developed by National Institute of Animal Science, RDA. Italian Ryegrass varieties were sown on March 26, 2020, and the harvest was on the 60th day of mean heading date, July 2. The heading date of Kowinearly was May 8, but Greenfarm and Greencall was May 4. The plant length was the largest in the Kowinearly variety. However, the Kowinearly suffered severe lodging. There was no significant difference in the length of spike among varieties, and the number of seeds per spike was the lowest in Greenfarm at 118.5 seed/spike. As for the seed weight per spike, the Greenfarm variety was significantly lower at 0.56 g/spike, but the 1,000 seed weight was the heaviest in the Greenfarm at 2.5g.. The number of spike per unit area was the highest in Greenfarm at 906/㎡. The dry matter content of seeds was the highest in Greenfarm at 54.3%, and for straw, Kowinearly was the highest at 35.3%. Seed productivity was not significant among varieties, and the average was 1,493 kg/ha. The yield of straw after seed production was also not significant among varieties (P>0.05), and the average was 3,172 kg/ha. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was judged.