• Elastomers and Composites
• /
• 제34권5호
• /
• pp.407-413
• /
• 1999

비세라믹 복합절연소재는 기계적 물성, 환경문제, 대량생산과 용이한 설계등의 우수한 특성으로 인해 전력산업분야에서 관심의 대상이 되어왔다. 또한 세라믹 절연체에 비하여 가볍고, 더욱 강인한 물성을 가진다는 장점이 있다. 본 연구에서는 뛰어난 전기 절연 특성과 우수한 내열, 내산화, 내오존성과 내후성을 가진 ethylene propylene diene monomer(EPDM)를 절연소재로 사용하였다. 특히, EPDM은 다른 고무 복합체에 비해 우수한 소수성을 가지기 때문에 장기간 사용이 가능하다는 점에서 본 연구에서는 EPDM 복합체의 유변학적 물성, 전기적물성, 그리고 접촉각의 측정을 통한 소수성 및 회복력에 관한 연구를 하였다. 또한 SEM을 사용하여 표면 형태학적 연구를 수행하였다.

• 정보학연구
• /
• 제8권2호
• /
• pp.85-91
• /
• 2005

We studied a pollution mechanism for simulation of contamination environment in industrial concentrated area of around a metropolitan that made to circulated flow in the chamber. In case of the virgin both side of EPDM or Silicon insulator, we confirmed that the pollution to much more than service insulator in the field. Also contamination of initial state of the virgin didn't falling in spite of physical outside factor easily. This study confirmed to that the silicon was too much accumulated pollution contrast to EPDM insulator from scatter(spray) point to regular interval position use the Kaolin contaminant in the chamber. There are effected to the hydrophobicity of polymer insulator due to the pollution. In ceramic insulator, we get to know that pollution is much more at the Post insulator with vertical than with horizontal setup insulator.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.203-206
• /
• 2008

본 연구는 고체 추진기관에 적용되는 내열재를 autoclave 방식이 아닌 hot press molding으로 제작하여 연소관에 접착 가능한 상태의 내열재로 제작하는데 초점을 두고 있다. EPDM/kevlar를 기본 조성으로 내열재 원료가 구성되고, 미가류 sheet 상태로 공급된다. 전방 내열재는 금형을 사용하여 preform 상태로 1차 제작하고, boots를 구형하기 위해 두개의 preform 사이에 modified nylon film을 사용하여 제작 하였다. 실린더 부위를 포함하고 있는 후방 내열재는 특별히 설계된 하나의 금형으로 제작되었고, boots 부위는 초경합금 칼날을 가지고 있는 장비에 의해 실현되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.410-413
• /
• 1999

Many researcher make efforts to develop an effective tracking method of accellatinn combined with the field simulation in actual system. Specially, the procelain type insulator is required exchanging to EPDM/SIR polymer insulator according to the recently environmental consideration. In this paper, we have developed the estimation system using the SD testing and the fractal mathematics. Those approach has been very successful to relative applied to the various parctical problem

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.71-77
• /
• 2016

내열고무 성능평가 모사시험장치를 이용하여 고체로켓추진기관 연소관의 내부단열을 위해 사용하는 Kevlar/EPDM 내열고무의 압력변화에 따른 열반응 특성을 비교하였다. 연소실 유효평균압력 및 유효연소시간은 각각 1,030 psi, 35.86 s 및 1,406 psi, 36.63 s이었다. 시험후 시편의 표면 상태는 차이가 없었으며, 열파괴두께는 각각 4.10 mm 및 4.18 mm이었다. 열반응 상수 ${\xi}$, ${\zeta}$ 및 열파괴 속도 $V_{TD}$는 각각 0.7839, -0.1646, 0.1328 및 0.7836, -0.1730, 0.1346이었다. Kevlar/EPDM 내열고무의 열반응 특성은 압력변화에 따른 차이를 보이지 않았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.135-136
• /
• 2008

In the paper, we evaluated insulation evaluation of EPDM insulator used often in power distribution lines in Korea. The selected samples for our experiment were three EPDM insulators for 22.9[kV] operated for 10 years or less. Using these samples, we observed the discharge pattern through accelerating experimental and analyzed discharge quantity using fractal theory. The validity of our fractal method were discussed and life time. reliability and quantitative analysis of the insulator was conducted through the method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.319-322
• /
• 1998

Many researchers make efforts to develop an effective material with anti-degradation property. Specially, the porcelain type insulator is required exchanging to polymer insulator acceding to the environmental consideration In this paper, we have developed the estimation system using the PD testing. The approach of PD has been very successful applied to the various practical insulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.973-975
• /
• 1998

Many researchers make efforts to develop an effective material with anti-degradation property. Specially, the porcelain type insulator is required exchanging to polymer insulator according to the environmental consideration. In this paper, we have developed the estimation system using the PD & SD testing. Those approach has been very successful applied to the various practical insulator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.218-221
• /
• 1999

Many researchers make efforts to develope an effective material with anti-tracking property. Specially, the porcelain type insulator is required exchanging to polymer insulator according to the environmental consideration. In this paper, we have developed the estimation system using the translated IEC-60587 test for the application of actual insulator. Those approach has been very successful applied to the various practical insulator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.62-65
• /
• 2001

The effects of accelerated UV radiation on EPDM used for a polymeric insulator were investigated by contact angle, surface voltage decay after corona charging, SEM-EDX, ATR-FTIR and XPS. EPDM occurs as loss of hydrophobicity by UV treatment, which followed by surface cracking and chalking. The surface voltage decay on UV-treated EPDM show that the shorter decay time corresponded to the treated samples with a longer UV exposure time. The surface oxygen and aluminum content were found to increase and carbon decrease, as is observed in EDX analysis. The ATR-FTIR and XPS indicated that C-C and C-H groups decreased and the highly oxidized carbon bonds such as C-O, C=O and O-C=O increase with time. Also, the effects of surface charges on hydrophobicity based on our results is discussed.