• 패션비즈니스
• /
• 제8권6호
• /
• pp.123-136
• /
• 2004

The purpose of this the end of 20th century fashion about various phenomenon of distopia. This study have the analysis and consideration through the elements and peculiarity of distopia. This study give us the various figures of distopia st fashion as well as the common features of distopia. The study method refers to sundry records, thesis, fashion magazine, publication, the collection works and internet. It is as follows. 'Distopia' prefix to dis of Utopia and means unknown future. Distopia trends towards future negatively. The end of 20th century, it is well brought out various cultures. Movie, novel and pop culture have effect on end of the 20th fashion with a view of distopia. It is the fear and uncertainty of the future. The characters of distopia through the works are divided into formative characteristics and aesthetics meaning. The future fashion of distopia expression mixed and various cultural life, also the mixed of utopia and distopia fashion. Distopia stimulates the designers to the new expression and expose their new areas.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.74-77
• /
• 2008

We improved an efficiency of fiber-optic current transformer by using a metal-coated sensor coil. To reduce the linear birefringence, we used a length of spun fiber as sensor coil, and then used a flint glass fiber coil for comparison. To make the sensor coil in the reflection type, we used different reflection mirrors at the end of the sensor coil, such as a Faraday rotator mirror, a simple mirror, a metal-coated fiber end and a simple fiber end. From the experimental results, the linear error of current measurements were less than ${\sim}$ 0.2 % regardless of the mirror types. The metal-coated sensor was the most cost-effective considering the fabrication cost and the simple structure.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.20-24
• /
• 2010

The position of the automobile's head restraint is very important for the neck injury in rear end collision. This study is about influence of the head restraint height and distance on neck injury during rear end collision. The effects of the position have been evaluated experimentally. The neck injuries are calculated by the relative acceleration between the upper and lower neck. As a result, It is found that the head restraint should be close enough to the back of the head and high enough to the top of the head.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.155-161
• /
• 2007

A bogie frame is typical safty part of railway vehicle. Main performance of a bogie frame is to support a car body and passenger weight and transfer traction and braking force. This paper is to evaluate the static strength and fatigue strength for the end trailer bogie with UIC 615-4 code. Therefore stress analysis of the end trailer bogie frame has been performed for various loading condition according to the UIC 615-4 code and haigh diagram is used for evaluation of fatigue strength. By the results of these analysis, static and fatigue strength of the end trailer bogie is satisfied with a applied criterion.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.506-513
• /
• 2009

The Construction Industry Institute (CII) developed the Project Definition Rating Index (PDRI), as a part of their Front End Planning best practices, which helps project managers assess and measure project scope definition risk elements. U.S. Green Building Council are seeing the benefits of sustainable building and Leadership in Energy and Environmental Design certification by positively impacting life cycle costs, building marketability, and organizational productivity. However, there have been no efforts to integrate these two planning tools in construction industry. By applying a supplemental tool which combines the PDRI with the LEED rating system, construction industry can develop and implement a tailored instrument that leads to total project success in sustainability. The objective of this research is to assemble a new front end planning mechanism for green buildings by incorporating the current PDRI and LEED systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2088-2090
• /
• 1998

A low-cost electronic starter is developed to decrease ignition failure significantly through successive starting trial and to prevent overheating at the end of fluorescent lamp life. Moreover, it has an additional feature of being capable of ignition at the recovered lamp voltage without any circuit correction. The developed electronic starter is consisted of four parts - a half wave rectifier circuit, a timer circuit, a switching circuit and a protection circuit. The protection circuit made up of a transistor and capacitors utilizing capacitive characteristics, carries out successive starting trial and end-of-life protection. Lamp ignition is completed within 0.5 seconds with taking advantage of a high preheating current from the half-wave rectifier circuit. Nevertheless, its performance is proved to be very excellent through a standard switching endurance test.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.311-317
• /
• 2019

Direct teaching is an essential function for collaborative robots for easy use by non-experts. For most robots, direct teaching is implemented only in joint space because the realization of Cartesian space direct teaching, in which the orientation of the end-effector is fixed while teaching, requires a measurement of the end-effector force. Thus, it is limited to the robots that are equipped with an expensive force/torque sensor. This study presents a Cartesian space direct teaching method for torque-controlled collaborative robots without either a force/torque sensor or joint torque sensors. The force exerted to the end-effector is obtained from the external torque which is estimated by the disturbance observer-based approach with the friction model. The friction model and the estimated end-effector force were experimentally verified using the robot equipped with joint torque sensors in order to compare the proposed sensorless approach with the method using torque sensors.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.7-13
• /
• 2010

KOptimization and control of wet-end process provide a key solution to improve paper quality and production efficiency at the same time. Wet-end of paper machine is to determine three important influencing factors of papermaking i.e., retention, drainage and formation. Good formation of paper could be made at the cost of deteriorated retention or drainage. In the same manner increase of retention aid could cause the bad formation of paper. It is very important to find a proper retention chemical which may satisfy one of three factors without the sacrifice of other two. Laboratory scale analyzing or screening chemical additives of wet-end was reported in this study based on RDA sheet molding. Different from the conventional test method, simultaneous consideration of three important wet-end properties could be made by RDA and consequently more reliable prediction of actual paper machine wet-end could be expected.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권1호
• /
• pp.39-46
• /
• 2008

The end plates of fuel cell assemblies are used to fasten the inner stacks, reduce the contact pressure, and provide a seal between Membrane-Electrode Assemblies (MEAs). They therefore require sufficient mechanical strength to withstand the tightening pressure, light weight to obtain high energy densities, and stable chemical/electrochemical properties, as well as provide electrical insulation. The design criteria for end plates can be divided into three parts: the material, connecting method, and shape. In the past, end plates were made from metals such as aluminum, titanium, and stainless steel alloys, but due to corrosion problems, thermal losses, and their excessive weight, alternative materials such as plastics have been considered. Composite materials consisting of combinations of two or more materials have also been proposed for end plates to enhance their mechanical strength. Tie-rods have been traditionally used to connect end plates, but since the number of connecting parts has increased, resulting in assembly difficulties, new types of connectors have been contemplated. Ideas such as adding reinforcement or flat plates, or using bands or boxes to replace tie-rods have been proposed. Typical end plates are rectangular or cylindrical solid plates. To minimize the weight and provide a uniform pressure distribution, new concepts such as ribbed-, bomb-, or bow-shaped plates have been considered. Even though end plates were not an issue in fuel cell system designs in the past, they now provide a great challenge for designers. Changes in the materials, connecting methods, and shapes of an end plate allow us to achieve lighter, stronger end plates, resulting in more efficient fuel cell systems.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2005년도 International Meeting of the Microbiological Society of Korea
• /
• pp.229.4-229
• /
• 2005