• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2159-2161
• /
• 1997

This paper presents the investigations and the reduction methods for EMI in the Elevator(E/L) system. In the large capacity E/L. Power factor controlled IGBT converter is used, so that the conducted EMI level is mostly determined by a high frequency input current. We suggest the low cost EMI countermearsure for E/L system using by a LCL filter ed a low cost noise filter.

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.455-462
• /
• 2003

스위칭 PFC 컨버터는 전력의 질을 향상시킬 뿐 아니라 최대 효율을 얻기 위해 널리 사용된다. 하지만, 스위칭 PFC 컨버터는 심각한 EMI 문제를 발생시킨다. 본 논문에서는 이 문제를 해결하기 위해서 APW 기법과 RPWM 기법을 PFC Boost 컨버터에 적용하여 우수한 결과를 얻었다. 시뮬레이션과 실험 결과를 통해서 에어컨 시스템에서의 개선된 고조파와 저감된 EMI 효과를 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.462-463
• /
• 2010

기존의 EMI 필터 설계 방식은 많은 가정을 전제로 설계되어 다양한 종류의 컨버터에 적용하기 어렵고, 특정 컨버터에만 적용할 수 있는 문제점이 있다. 이를 해결하기 위해 본 논문에서는 측정 대상 시료의 노이즈 원과 노이즈 소스 임피던스를 등가회로로 모델링한 후 EMI 필터에 사용되는 소자의 임피던스 모델을 이용하여 노이즈 소스 임피던스를 유추한다. 이를 이용하여 모든 컨버터에 적용될 수 있는 EMI 필터 설계 방법을 제시한다. 최종적으로 각 단계에서 실제 측정 결과 및 모의실험 결과를 제시하여 제안 방식의 타당성 및 유용성을 검증하였다.

• 한국멀티미디어학회논문지
• /
• 제18권3호
• /
• pp.401-407
• /
• 2015

In this paper, we propose the method to eliminate EMI (Electro-Magnetic Interference) in ELF (Extremely Low Frequency) band below 2 KHz for extending the gesture-recognition distance of smart TVs to more than 3m using electric potential sensor. First, we measure the electric field generated from the back panel of a TV and propose the effective arrangement of two sets of differential sensors as well as the shielding method using metal fiber. Also, we eliminate the PLN (Power Line Noise) and other noise generated from the TV and sensors as well as surrounding environments using filters. Using the proposed EMI eliminating methods, we evaluate displacement ratio on measured signals according to distance between sensors and a moving hand. Experiment results show that our proposed method can extend the hand-gesture sensing distance using EPS (Electric Potential Sensor) up to more than 3m, which is enough to satisfy applicability of EPS based remote control to Smart TVs.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1326-1335
• /
• 2019

Common mode (CM) chokes are a crucial part in EMI filters for mitigating the electromagnetic interference (EMI) of switched-mode power supplies (SMPS) and for meeting electromagnetic compatibility standards. However, the parasitic capacitances of a CM choke deteriorate its high frequency filtering performance, which results in increases in the design cycle and cost of EMI filters. Therefore, this paper introduces a negative capacitance generated by a negative impedance converter (NIC) to cancel the influence of equivalent parallel capacitance (EPC). In this paper, based on a CM choke equivalent circuit, the EPCs of CM choke windings are accurately calculated by measuring their impedance. The negative capacitance is designed quantitatively and the EPC cancellation mechanisms are analyzed. The impedance of the CM choke in parallel with negative capacitances is tested and compared with the original CM choke using an impedance analyzer. Moreover, a CL type CM filter is added to a fabricated NIC prototype, and the insertion loss of the prototype is measured to verify the cancellation effect. The prototype is applied to a power converter to test the CM conducted noise. Both small signal and EMI measurement results show that the proposed technique can effectively cancel the EPCs and improve the CM filter's high frequency filtering performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2106-2107
• /
• 1998

This paper analyzes the sources of EMI noise, and Presents the noise reduction method using the modulation of switching frequency. Modulating the switching frequency makes the noise of side bands by shattering emission spectrum, and then can reduce the size of EMI filter at input line of power supply.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 2003

This paper presents the results of a series of performance tests for the Stilting cryocooler. A free piston and free displacer(FPFD) Stilting cryocooler for cooling infrared and cryo-sensors is currently under development at KIMM. Our coolers are specifically designed to work in the thermal imaging device and to meet requirements such as cooling capacity, COP and high reliability. In this work, Stilting cryocooler is designed, manufactured and fabricated, and performance characteristics for the vibration, acoustic noise, EMI and leak rate are evaluated. Vibration outputs are measured to 20KHz for compressor and expander, respectively. And, the objective of noise test is a noise level, less than 30㏈ at 5 m. EMI tests are carried out according to the standard MIL-STD-461C tests RE01 and RE02. Leak test for the Stilting cryocooler is performed by bombing method.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.1-7
• /
• 2008

This paper presents electromagnetic interference(EMI) suppression method applied on the direct current(DC) motor driver for power tail gate control. EMI noise is generated by the fast switching of power devices connected to electric loads. It has become a matter of concern because of the vast increase in the number and sophistication of electronic system in automotive environment. The proposed EMI reduction method is based on the principle of reducing the transient speed of power devices by changing the parameters of the driver circuit related to the power MOSFET. In this paper, power losses were calculated by loss equations and thermal simulation was used to evaluate the effect on printed circuit board. Based on these results, the DC motor driver was fabricated and tested. The proposed method can help to design a DC motor driver which allows it to obtain an acceptable compromise between power losses and EMI.

• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.507-515
• /
• 2004

고속 스위칭 소자의 출현과 함께 높은 전압 상승률(dv/dt)은 PWM 인버터에 EMI 노이즈 및 축 전압 그리고 베어링 누설전류 등의 문제 등을 발생시키고 있다. 본 논문에서는 유도전동기 시스템에서의 새롭게 개발된 전도성 EMI 저감 SVPWM 기법의 응용에 대하여 기술한다. 새롭게 개발된 커먼모드 전압제거 SVPWM 기법은 인버터 제어에 있어서 영벡터 상태를 사용하지 않고 종래의 PWM 기법에 비하여 커먼모드 전압의 감소가 가능하다. 소프트웨어 접근에 의한 제안된 기법의 타당성은 시뮬레이션과 실험적 결과를 통하여 확인하였다.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.552-559
• /
• 1998

Conducted noise in power line contains both the common mode(CM) and differential mode(DM) noise. These two modes of noise are caused by different noise sources and paths. Therefore, CM/DM noise must be deal with individually in EMI filter. In this paper the technique to separate power line noise is presented, which can be used to measure both the CM and the DM noise from total generated noise. Also, noise-separator is designed and experimental results showed 30 dB above of separation performance in 10 kHz~10 MHz.