• 제목/요약/키워드: EMI (Electromagnetic Interference)

검색결과 289건 처리시간 0.025초

전장 시스템의 전자파 적합성 대응 기술 (Compliance Technologies of Electromagnetic Compatibility in Automotive Electronic Systems)

  • 신영산;이성수
    • 전기전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.506-509
    • /
    • 2018
  • 최근 전장 시스템에서 부품의 개수와 주파수가 급증함에 따라 전자파에 의해 오동작이 발생하는 전자파 간섭(EMI: electromagnetic interference)이 자주 발생하고 있다. 본 논문에서는 EMI 필터, EMI 차폐 물질, 분산 스펙트럼 클록 등 다양한 전자파 적합성(EMC: electromagnetic compatibility) 대응 기술을 살펴보고 각 기술의 장단점에 대해 설명한다.

유연한 투명 전자기 간섭 차폐 필름의 기술개발 동향 (Technical Trends of Flexible, Transparent Electromagnetic Interference Shielding Film)

  • 임현수;오정민;김종웅
    • 마이크로전자및패키징학회지
    • /
    • 제28권1호
    • /
    • pp.21-29
    • /
    • 2021
  • Recently, semiconductor chips and electronic components are increasingly being used in IT devices such as wearable watches, autonomous vehicles, and smart phones. As a result, there is a growing concern about device malfunctions that may occur due to electromagnetic interference being entangled with each other. In particular, electromagnetic wave emissions from wearable or flexible smart devices have detrimental effects on human health. Therefore, flexible and transparent electromagnetic interference (EMI) shielding materials and films with high optical transmittance and outstanding shielding effectiveness have been gaining more attention. The EMI shielding films for flexible and transparent electronic devices must exhibit high shielding effectiveness, high optical transmittance, high flexibility, ultrathin and excellent durability. Meanwhile, in order to prepare this EMI shielding films, many materials have been developed, and results regarding excellent EMI shielding performance of a new materials such as carbon nano tube (CNT), graphene, Ag nano wire and MXene have recently been reported. Thus, in this paper, we review the latest research results to EMI shielding films for flexible and transparent device using the new materials.

TEM 셀에서 PCB 패턴이 EMI 측정에 미치는 영향 및 PCB 설계 가이드라인 제시 (Effects of PCB Patterns on EMI Measurement in TEM Cell and Proposal of PCB Design Guidelines)

  • 최민경;신영산;이성수
    • 전기전자학회논문지
    • /
    • 제21권3호
    • /
    • pp.272-275
    • /
    • 2017
  • 최근 반도체의 집적도가 증가하고 배선 폭이 미세해짐에 따라 칩 수준의 EMI(electromagnetic interference)가 문제로 대두되고 있다. 이에 따라 칩 제조사는 칩 수준의 EMI를 측정하기 위해 TEM 셀(transverse electromagnetic cell)을 사용하고 있다. 이를 위해 측정용 PCB(printed circuit board)를 제작하여야 하지만, PCB의 배선 패턴 등이 EMI 측정에 영향을 미칠 수 있다는 점이 간과되고 있다. 본 논문에서는 PCB 설계 변수를 변화시켜가며 테스트 패턴을 제작한 다음 TEM 셀의 EMI 측정에 미치는 영향을 분석하였다. 또한 이를 바탕으로 EMI 측정에 미치는 영향을 최소화하기 위한 PCB 설계 가이드라인을 제시하였다.

추적레이다에 의한 인체에 대한 영향(HERP) 및 전자파 간섭(EMI) 분석

  • 김대오;신한섭;김태형;이효근
    • 항공우주기술
    • /
    • 제4권1호
    • /
    • pp.239-246
    • /
    • 2005
  • 본 논문에서는 추적레이다의 고출력 전자파에 의한 인체에 대한 영향(HERP)과 추적레이다 자체 장비에 대한 영향 및 동일한 C-Band 주파수 대역 사용으로 발생하는 기상레이다에 대한 전 자파 간섭(EMI) 분석을 실시하여 장비 설치 구역 내 통제가 가능한 인원(Controlled Personnel) 과 통제가 불가능한 인원(Uncontrolled Personnel)에 대한 최소 접근 제한거리를 산출하고 추적레이다 자체 장비에 대한 영향 및 동일한 주파수 대역 사용으로 발생하는 추적레이다와 기상레이다간의 전자파 간섭(EMI)을 해소하기 위한 방안을 제시하였다.

  • PDF

Analysis of revised regulatory guidance on electromagnetic interference qualification for nuclear safety

  • In Beom Ahn;Jaeyul Choo ;Jae Yoon Park ;Hyunchul Ku ;Kyeong-Sik Min
    • Nuclear Engineering and Technology
    • /
    • 제55권3호
    • /
    • pp.870-875
    • /
    • 2023
  • In this paper, we analyzed the revised guidance on electromagnetic (EM) interference qualification of Regulatory Guide 1.180 (Revision 2), which is published by the U.S. Nuclear Regulatory Commission for electromagnetic compatibility qualification for nuclear safety, by comparing it with that of the previous version. We confirmed that the test methods and the acceptance criteria of both CE101 and CE102 tests for conductive emission and RE102 test for radiating emission are changed in the recently revised Regulatory Guide 1.180 (Revision 2). Furthermore, we found that the revised Regulatory Guide 1.180 provides flexibility in the use of alternative methods for EM interference (EMI) qualification, in that a mix of the various base-standards is technically allowed. In addition, the primary revision of the updated Regulatory. Guide 1.180 is that MIL-STD-461G is to be adopted as the latest base-standard, instead of MIL-STD-461E. To evaluate the influence on EMI qualification for nuclear safety due to the endorsement of MIL-STD-461G, we thoroughly analyzed the modifications in the acceptance criteria and test methods for EMI qualification, and then validated the analyzed effect on the EMI qualification, which is caused by the revision of MIL-STD-461, by performing electromagnetic simulation for equipment under RE102 test.

DC-DC 전력변환장치용 Hybrid EMI 필터 개발 (Development of the Hybrid EMI Filter for DC-DC Converter)

  • 이동호;유진완;박종연
    • 산업기술연구
    • /
    • 제34권
    • /
    • pp.71-78
    • /
    • 2014
  • Recently, using the electronic devices was increased with semiconductor developments. So, the EMI(Electromagnetic interference) problem become to important issue for coexistence with each electronic devices. The EMI is caused by switching operation from the power switches as the FET and the transistor in power conversion devices. In this paper, the hybrid EMI filter that composed with active components and passive components was described. The EMI filter is applied to the 160 watts LED driver experimentally verify the performance. The hybrid EMI filter is compared with non-filter, only passive filter and only active filter. The proposed EMI filter attenuated CM noise more than traditional passive filter.

  • PDF

가전기기용 교류 전동기 구동 시스템의 EMI 특성 및 필터 설계 (EMI Characteristics and filter design of AC Drives for Home Appliances)

  • 정세교;신휘범
    • 전력전자학회논문지
    • /
    • 제9권1호
    • /
    • pp.81-87
    • /
    • 2004
  • 본 논문에서는 세탁기, 에어컨과 같은 가전기기에 사용되는 인버터 구동 교류 전동기 구동 시스템의 EMI 특성해석 및 필터 설계 방법에 대하여 기술하였다. 먼저, 인버터 구동 교류 전동기 구동 시스템의 전도성 EMI 발생 및 전달 메커니즘에 대하여 분석하였고, 공통 및 차동모드 노이즈 분리 기법을 이용한 EMI 필터의 설계 방법을 제시하였다. 제시된 방법의 타당성을 검증하기 위해 PWM 인버터로 구동되는 유도 전동기 구동 시스템에 대한 실험을 수행하였고 EN55014 EMI 기준을 만족하는 결과를 얻을 수 있었다.

휴대폰의 폴딩 각도와 휴대폰 케이스의 EMI 방지 도료 분포패턴에 따른 SAR 변화에 관한 연구 (A Study on SAR Variation by Folding Angle and EMI Paint Distribution of Case for Mobile Handsets)

  • 이규호;김창일;양운근
    • 한국전자파학회논문지
    • /
    • 제14권4호
    • /
    • pp.421-430
    • /
    • 2003
  • 본 논문에서는 휴대폰 개발 초기단계에서부터 SAR(Specific Absorption Rate)를 고려할 수 있는 방법을 제안하였다. 먼저, 휴대폰의 폴딩 각도를 150$^{\circ}$에서 142$^{\circ}$까지 변화시키면서 SAR값을 계산하였다. 계산결과 폴더 각도가 작아질수록 SAR값이 감소함을 알 수 있었고, 142$^{\circ}$일 때 측정결과와 약 3.95 %의 오차가 있었다. EMI (Electromagnetic Interference) 방지 도료의 분포패턴을 변화시켜가면서 SAR값을 측정한 결과, 분포패턴이 다를 경우 SAR값이 다름을 알 수 있었다. 안테나 급전점 근처의 EMI 방지 도료를 제거할 경우 SAR 감소효율이 15.46 % 이었으며, 도료를 지그재그 패턴으로 분포시킬 경우 SAR 감소효율이 가장 크게 나타남을 알 수 있었다.

Detection of electromagnetic interference shielding effect of Hanji mixed with carbon nanotubes using nuclear magnetic resonance techniques

  • Byun, Young Seok;Chae, Shin Ae;Park, Geun Yeong;Lee, Haeseong;Han, Oc Hee
    • Carbon letters
    • /
    • 제27권
    • /
    • pp.90-97
    • /
    • 2018
  • Electromagnetic interference (EMI) shielding is an important issue in modern daily life due to the increasing prevalence of electronic devices and their compact design. This study estimated EMI-shielding effect (EMI-SE) of small ($8-14{\times}17mm$) Hanji (Korean traditional paper) doped with carbon nanotubes (CNTs) and compared to Hanji without CNT using $^2H$ (92.1 MHz) and $^{23}Na$ (158.7 MHz) nuclear magnetic resonance (NMR) peak area data obtained from 1 M NaCl in $D_2O$ samples in capillary tubes that were wrapped in the Hanji samples. The simpler method of using the variation of reflected power and tuning frequency by inserting the sample into an NMR coil was also tested at 242.9, 158.7, and 92.1 MHz. Overall, EMI shielding was relatively more effective at the higher frequencies. Our results validated that NMR methods to be useful to evaluate EMI-SE, particularly for small, flexible shielding materials, and demonstrated that EMI shielding by absorption is dominant in Hanji mixed with CNT.

하이브리드 전도성 직조섬유의 전자파 차폐효과 (Electromagnetic Interference Shielding Effectiveness of Hybrid Conductive Fabrics)

  • 한길영;김기열;윤태순
    • 한국기계가공학회지
    • /
    • 제14권2호
    • /
    • pp.81-86
    • /
    • 2015
  • This study investigated electromagnetic interference (EMI) shielding effectiveness (SE) of hybrid conductive fabrics. The coaxial transmission line method was used to measure the EMI Shielding effectiveness of the conductive fabrics. We designed and constructed a measuring system, consisting of a network analyzer and a device that serves as a sample holder and at the same time as a transmission medium of incident electromagnetic waves. The measurements of SE were carried out in a frequency range from 100 MHz to 2 GHz. The results of the EMI shielding experiments showed that the maximum electromagnetic shielding effectiveness (EMSE) values of sandwich type C/A/C (carbon fiber sheet/aluminum foil tape/carbon fiber sheet) and C/Ni/C (carbon fiber sheet/magnetic shielding foil/carbon fiber sheet) samples were 55 dB and 113 dB, respectively, at a frequency of 1.9 GHz.