• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.304-309
• /
• 1998

In this paper, authors introduce an application of a nonlinear rotor flux observer, known under the name of ELO(extended Luenberger Observer), for direct rotor field oriented control(DRFOC) of induction motor. ELO requires no solution of nonlinear partial differential equation for its coordinate transformation and linearization used for the nonlinear observer design. Its simulation results concerned to different level of unknown variables of load torque and rotor resistance show high accuracy on rotor flux estimation in steady state.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.32.2-32.2
• /
• 2008

• ETRI Journal
• /
• v.9 no.1
• /
• pp.146-157
• /
• 1987

SOI(Silicon-On-Insulator)는 차세대 VLSI 구조로서 최근 중요한 연구개발 대상이 되고 있다. SOI의 제조기술을 크게 recrystallization, ELO, FIPOS 및 SIMOX로 나누고 이들 각 기술에 대한 고찰을 하였다. 향후 전반적인 SOI 제조기술 개발방향은 SOI면적 확장 및 결함 감소를 위한 것이 될 것이다.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.687-694
• /
• 1994

Heteroepitaxial InP/GaAs layers were grown using the selective liquid phase epitaxy (SLPE) technique. It was observed that the optimum LPE conditions were $660^{\circ}C$ growth temperature, $5^{\circ}C$ supercooling, and $0.4^{\circ}C$/min cooling rate. Maximum expitaxial layer overgrowth (ELO) of 110-160$\mu \textrm{m}$ was obtained when the seed was aligned along (112) orientation. Initial melt-back of the substrate was observed but limited to the seed region so that flat In-Ga-As-P layers were grpwn throughout the GaAs substrates. The InP/GaAs heteroepitaxial structure could be obtained by growing an additional InP layer on top of the In-Ga-As-P layer.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.208-213
• /
• 2018

Epitaxial ($11{\bar{2}}0$) a-plane GaN films were grown on a ($1{\bar{1}}02$) R-plane sapphire substrate with photoresist (PR) masks using metal organic chemical vapor deposition (MOCVD). The PR mask with striped patterns was prepared using an ex-situ lithography process, whereas carbonization and heat treatment of the PR mask were carried out using an in-situ MOCVD. The heat treatment of the PR mask was continuously conducted in ambient $H_2/NH_3$ mixture gas at $1140^{\circ}C$ after carbonization by the pyrolysis in ambient $H_2$ at $1100^{\circ}C$. As the time of the heat treatment progressed, the striped patterns of the carbonized PR mask shrank. The heat treatment of the carbonized PR mask facilitated epitaxial lateral overgrowth (ELO) of a-plane GaN films without carbon contamination on the R-plane sapphire substrate. Thhe surface morphology of a-plane GaN films was investigated by scanning electron microscopy and atomic force microscopy. The structural characteristics of a-plane GaN films on an R-plane sapphire substrate were evaluated by ${\omega}-2{\theta}$ high-resolution X-ray diffraction. The a-plane GaN films were characterized by X-ray photoelectron spectroscopy (XPS) to determine carbon contamination from carbonized PR masks in the GaN film bulk. After $Ar^+$ ion etching, XPS spectra indicated that carbon contamination exists only in the surface region. Finally, the heat treatment of carbonized PR masks was used to grow high-quality a-plane GaN films without carbon contamination. This approach showed the promising potential of the ELO process by using a PR mask.

• Journal of Multimedia Information System
• /
• v.1 no.1
• /
• pp.67-75
• /
• 2014

Nowadays as video services grow rapidly, it is important for the service providers to provide customized services. Video ranking plays a key role for the service providers to attract the subscribers. In this paper we propose a weekly video ranking mechanism based on the quantified user engagement. The traditional QoE ranking mechanism is relatively subjective and usually is accomplished by grading, while QoS is relatively objective and is accomplished by analyzing the quality metrics. The goal of this paper is to establish a ranking mechanism which combines the both advantages of QoS and QoE according to the third-party data collection platform. We use data mining method to classify and analyze the collected data. In order to apply into the actual situation, we first group the videos and then use the regression tree and the decision tree (CART) to narrow down the number of them to a reasonable scale. After that we introduce the analytic hierarchy process (AHP) model and use Elo rating system to improve the fairness of our system. Questionnaire results verify that the proposed solution not only simplifies the computation but also increases the credibility of the system.

• 한국노년학
• /
• v.40 no.2
• /
• pp.311-323
• /
• 2020

Older adults are at a high risk of falling, causing severe injuries and increased hospital stays and treatment costs. This can be a burden not only on the family but also on the national economy. Thus, fall prevention is very important in nurses' and nursing assistants' work. This study intended to grasp the real situation faced by nurses and nursing-assistants working at geriatric hospitals in J province, Korea. The researcher interviewed thirty-six nurses and nursing-assistants in four geriatric hospitals and performed four focus group interviews. Data were analyzed through an inductive content analysis based on Elo & Kyngäs's approach. Three categories and five subcategories were identified. Categories were patients, environmental, and personal factors. Patient factors included patients' impaired cognitive function. Environmental factors included lack of personnel support and assignment of inpatients without regard to fall risk. Personal factors included hopelessness regarding improvement and fear of being blamed. Promotion of fall prevention practice needs a gradual increase in nursing staff at geriatric hospitals, a system for assigning hospital room according to fall risk, and education and support system to reduce nursing burden.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.649-659
• /
• 2017

Extremophilic microorganisms have established a diversity of molecular strategies in order to survive in extreme conditions. Biocatalysts isolated by these organisms are termed extremozymes, and possess extraordinary properties of salt allowance, thermostability, and cold adaptivity. Extremozymes are very resistant to extreme conditions owing to their great solidity, and they pose new opportunities for biocatalysis and biotransformations, as well as for the development of the economy and new line of research, through their application. Thermophilic proteins, piezophilic proteins, acidophilic proteins, and halophilic proteins have been studied during the last few years. Amylases, proteases, lipases, pullulanases, cellulases, chitinases, xylanases, pectinases, isomerases, esterases, and dehydrogenases have great potential application for biotechnology, such as in agricultural, chemical, biomedical, and biotechnological processes. The study of extremozymes and their main applications have emerged during recent years.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.121-121
• /
• 1999

Gallium nitride (GaN) semiconductor is intensively under investigation for commercialization of short wavelength light emitting devices and laser diodes. One of serious obstacles to overcome is to reduce the defect density in GaN film grown by various techniques such as MOCVD, HVPE, etc. Many research groups including SAIT are trying to improve the defect density to 106-107/cm2 from the level of 108-1010/cm2. We have investigated epitaxial growth behaviour of GaN thin and thick films under hidride vapour phase epitaxy (HVPE) condition. In this report, we present the microstructural and crystallographical characteristics of the GaN films grown on sapphire (0001) substrate which were studied by both conventional and high-resolution transmission electron microscopy (TEM). Also we present some microscopic analysis results obtained from GaN films grown by ELO(dpitzsial lateral overgrowth)-HVPE and from GaN quantum well structures grown by MOCVD. Another serious problem in growing GaN thick film by HVPE is internal micro-cracks. We also comment the origin of the micro-crack.

• Korean Journal of Materials Research
• /
• v.13 no.9
• /
• pp.598-605
• /
• 2003

The optimized conditions for the cross-sectional TEM sample preparation using tripod polisher and ion-beam miller was confirmed by AFM and TEM. For the TEM observation of interfaces including InGaN layers like InGaN/GaN MQW structures, the sample preparation by the only tripod polishing was useful due to the reduction of artifacts. On the other hand, in case of the thick nitride films like ELO, PE, and superlattice, both tripod polishing and controlled ion-beam milling were required to improve the reproducibility. As a result, the ion-beam milling with the $60^{\circ}$modulation showed the minimum height difference between film and sapphire interface and the ion-beam milling of the $80^{\circ}$modulation showed the broad observable width.