• Journal of Adhesion and Interface
• /
• v.18 no.4
• /
• pp.171-178
• /
• 2017

Recently, layer-by-layer (LbL) assembly has emerged as a promising fabrication technique in controlling surface wetting properties. LbL assembly technique is eco-friendly versatile technique to control the hierarchical structure and surface properties in nano- and micro-scale by employing a variety of materials (e.g., polymers, surfactants, nanoparticles, etc.). This article reviews recent progress in controlling the surface wetting using LbL technique. In particular, technical trends and research findings on fabrication and the applications of superhydrophobic, superhydrophilc, and superoleophobic/superhydrophilic LbL surfaces are extensively explained. Additionally, basic principles and fabrication methods in emerging areas such as omniphobic, self-healing, intelligent and responsive LbL surfaces are discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.171-177
• /
• 2011

Tensile tests were conducted at low temperatures for the steel materials which are used for outer shell of the vessels making transit through the polar regions. The selected steel materials were GL-DH32, GL-DH36 and GL-EH36. In comparison with the results at room temperature, the yield stress increases approximately by 10 to 13 percent at $-30^{\circ}C$ and by 13 to 19 percent at $-50^{\circ}C$ while the tensile strength increases about by 9 percent at $-30^{\circ}C$ and 11 to 14 percent at $-50^{\circ}C$. To obtain true stress-true strain, i.e. correct plastic hardening characteristics, Bridgman's(1952) necking correction formula was introduced taking triaxial state of stresses after onset of diffuse necking into consideration. Photographs of fractured surfaces were taken by using Scanning Electron Microscope immedately after tensile tests completed and one for GL-EH36 has been presented in this paper.

• Coupled systems mechanics
• /
• v.3 no.2
• /
• pp.171-193
• /
• 2014

The dynamic characterization is important in making accurate predictions of the seismic response of the hybrid structures dominated by different damping mechanisms. Different damping characteristics arise from the construction of hybrid structure with different materials: steel for the upper part; reinforced concrete for the lower main part and interaction with supporting soil. The process of modeling damping matrices and experimental verification is challenging because damping cannot be determined via static tests as can mass and stiffness. The assumption of classical damping is not appropriate if the system to be analyzed consists of two or more parts with significantly different levels of damping. The dynamic response of structures is critically determined by the damping mechanisms, and its value is very important for the design and analysis of vibrating structures. A numerical algorithm capable of evaluating the equivalent modal damping ratio from structural components is desirable for improving seismic design. Two approaches are considered to explore the dynamic response of hybrid tower of cable-stayed bridges: The first approach makes use of a simplified model of 2 coupled lumped masses to investigate the effects of subsystems different damping, mass ratio, frequency ratio on dynamic characteristics and equivalent modal damping; the second approach employs a detailed numerical step-by step integration procedure.

• Research in Mathematical Education
• /
• v.18 no.3
• /
• pp.171-185
• /
• 2014

Mathematically deductive reasoning skill is one of the major learning objectives stated in senior secondary curriculum (CDC & HKEAA, 2007, page 15). Ironically, student performance during routine assessments on geometric reasoning, such as proving geometric propositions and justifying geometric properties, is far below teacher expectations. One might argue that this is caused by teachers' lack of relevant subject content knowledge. However, recent research findings have revealed that teachers' knowledge of teaching (e.g., Ball et al., 2009) and their deductive reasoning skills also play a crucial role in student learning. Prior to a comprehensive investigation on teacher competency, we use a case study to investigate teachers' knowledge competency on how to teach their students to mathematically argue that, for example, two triangles are congruent. Deductive reasoning skill is essential to geometry. The initial findings indicate that both subject and pedagogical content knowledge are essential for effectively teaching this challenging topic. We conclude our study by suggesting a method that teachers can use to further improve their teaching effectiveness.

• Journal of Wetlands Research
• /
• v.13 no.2
• /
• pp.171-179
• /
• 2011

The main objective of this study is to estimate of the vegetation response induced by climate change to soil moisture. We investigated a relationship between vegetation activity and climate variables using Moderate Resolution Imaging Spectroradiometer (MODIS)-retrieved Normalized Difference Vegetation Index (NDVI) and soil moisture. NDVI which extracted from MODIS 13 Vegetation Indices Product was considered as an useful parameter to figure out a relationship with two types of soil moisture, which were observed at Rural Development Administration sites and estimated from Advanced Microwave Scanning Radiometer E (AMSR-E) satellite imagery. The correlation of MODIS-NDVI and ground measured soil moisture were observed, became much stronger when compared to soil moisture values with time lag (5days, 10days, 15days). The correlation patterns between NDVI and soil moisture with different time lag were related to soil texture. The results from this study will be useful to understand the role of vegetation in water balance control in various scales from regional to global climate change.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.5
• /
• pp.440-445
• /
• 2000

To develop a new processed foods with prepersimmon, the contents of approximate composition, free sugar, organic acid, mineral and vitamins in prepersimmon(Diospyros kaki Thumb. cv. Fuyu) were investigated. The approximate composition was 89.08% of moisture, 0.26% of crude ash, 0.56% of crude fat and 0.75% of crude protein respectively. Free sugars were composed of glucose, fructose and sucrose. Glucose(3.34%) and fructose(3.01%) were major free sugars, and sucrose was detected a small quantities. The organic acids were composed of citric acid. maleic acid, fumalic acid and lactic acid. Lactic acid(68.65mg%) was major a organic acid and took 79% of total organic acid amount. Minerals were K, P, Na. Ca, Fe and Zn, and K was a major mineral and detected 126.l2mg%, and Fe and Zn were a small quantities. The content of vitamin A was 33.95 R.E., and less than that in hard persimmon, and the content of vitamin C was 171.01 mg%, 10 times higher in comparison with that in hard persimmon, and vitamin B$_1$ and B$_2$ were detected a small quantities.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.171-175
• /
• 2014

Gu$\acute{e}$ret et al. tries to obtain the solution using linear programming with $O(m^4)$ time complexity for cane sugar production problem a kind of bin packing problem that is classified as NP-complete problem. On the other hand, this paper suggests the maximum loss of lot first production greedy rule algorithm with O(mlogm) polynomial time complexity underlying assumption of the polynomial time rule to find the solution is exist. The proposed algorithm sorts the lots of sugar loss slope into descending order. Then, we select the lots for each slot production capacity only, and swap the exhausted life span of lots for lastly selected lots. As a result of experiments, this algorithm reduces the $O(m^4)$ of linear programming to O(mlogm) time complexity. Also, this algorithm better result than linear programming.

• Advances in aircraft and spacecraft science
• /
• v.3 no.2
• /
• pp.171-195
• /
• 2016

The present paper is a review of the main activities carried out within the context of the COMPTINN' program, a joint research project founded by a FUI program (Fonds $Unifi{\acute{e}}s$ $Interminist{\acute{e}}riels$) in which four research teams focused on the thermo-oxidation behaviour of HTS-TACTIX carbon-epoxy composite at 'high' temperatures ($120^{\circ}C-180^{\circ}C$). The scientific aim of the COMPTINN' program was to better identify, with a multi-scale approach, the link between the physico-chemical mechanisms involved in thermo-oxidation phenomena, and to provide theoretical and numerical tools for predicting the mechanical behaviour of aged composite materials including damage onset and development.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.171-175
• /
• 2014

In this study, we suggest a method to measure the thickness of thin films nondestructively using the dispersion characteristics of a surface acoustic wave propagating along the thin film surface. To measure the thickness of thin films, we deposited thin films with different thicknesses on a Si (100) wafer substrate by controlling the deposit time using the E-beam evaporation method. The thickness of the thin films was measured using a scanning electron microscope. Subsequently, the surface wave velocity of the thin films with different thicknesses was measured using the V(z) curve method of scanning acoustic microscopy. The correlation between the measured thickness and surface acoustic wave velocity was verified. The wave velocity of the film decreased as the film thickness increased. Therefore, thin film thickness can be determined by measuring the dispersion characteristics of the surface acoustic wave velocity.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.171-181
• /
• 2022

Purpose: In this paper, we show our blending ratio of 10 types of Essential Oils that survives beneficial bacteria and kills harmful bacteria in the scalp, and we investigate the possibility of application of our blending ratio to the development of anti-dandruff products and the possibility of being used as a raw material for clinical beauty and customized cosmetics. Methods: The scalp microorganisms used in our study were M. furfur, S. epidermidis, E. coli, and P. nitroreducens. There are a total of 10 Essential Oils such as True Lavender, Lime, Roman chamomile, Rosemary camphor, Cedarwood, Geranium, Clove, Tea tree, Palmalosa, and Peppermint. The antibacterial test of the blended Essential Oil was carried out according to the test method of the standardized evaluation methodology of "Food and Food Additives Code". Since M. furfur is related to the growth of sebum in the scalp, in this study we used the fnLNB and the fnLNA with 20 ㎖ of whole fat cow milk added. Results: The blending ratio of EO, which inhibits dandruff-causing bacteria such as M. furfur, S. epidermidis, E. coli, and does not inhibit P. nitroreducens showing dominant growth in a healthy scalp, was B8(Clove 0.2%, Roman chamomile 0.5%, Tea tree 0.3%), B9(Geranium 0.1%, Palmarosa 0.1%, Roman chamomile 0.5%, Tea tree 0.3%), B10(Clove 0.1%, Geranium 0.1%, Palmarosa 0.1%, Roman chamomile 0.5%, Tea tree 0.2%). Conclusion: It is thought that the blending ratio of BEO obtained as a result of this study can provide a basis for use as an alternative to antibiotics in developing anti-dandruff drugs and emerge as a new alternative to solve scalp microbial imbalance. In order for EO to be used as a useful raw material for anti-dandruff preparation, researches on 1) Standardization (the effects of products differ according to the types, regions, climate, extraction methods, etc.), 2) Antimicrobial effects, 3) Safety, etc., must be established.