• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.59-75
• /
• 2016

Reduced or black $TiO_{2-x}$ materials with oxygen-deficiency have been achieved by creating oxygen vacancies and/or defects at the surface using different methods. Fascinatingly, they exhibited an extended absorption in VIS and IR instead of only UV light with bandgap decrease from 3.2 (anatase) to ~1 eV. However, despite the dramatic enhancement of optical absorption in black $TiO_{2-x}$ materials, they have failed to show expected visible light-assisted water splitting efficiency. This was ascribed to the high concentration of the surface defects and/or oxygen vacancies, considered as an electron donor to enhance donor density and improve the charge transportation in black $TiO_2$ can also act as charge recombination centers, which eventually decrease photocatalytic activity. Therefore, a black ot reducd $TiO_2$ material with optimized properties would be highly desired for visible light photocatalysis. In this report, a new controlled magnesiothermic reduction has been developed to synthesize reduced black $TiO_{2-x}$ in the presence $H_2/Ar$ for photocatalytic $H_2$ production from methanol-water system. The material possesses an optimum band gap and band position, oxygen vacancies, and surface defects and shows significantly improved optical absorption in the visible and infrared region. The synergistic effects enable the reduced $TiO_{2-x}$ material to show an excellent hydrogen production ability along with long-term stability under the full solar wavelength range of light and visible light, respectively, in the methanol-water system in the presence of Pt as a co-catalyst. These values are superior to those of previously reported black $TiO_2$ materials. On the basis of all the results, it can be realized that the outstanding activity and stability of the reduced of $TiO_{2-x}$ NPs suggest that a balanced combination of different factors like $Ti^{3+}$, surface defects, oxygen vacancy, and recombination center is achieved along with optimized bandgap and band position during the preparation employing magnesiothermic reduction in the presence of $H_2$. The controlled magnesiothermic reduction in the presence of $H_2$ is one of the best alternative ways to produce active and stable $TiO_2-based$ photocatalyst for $H_2$ production.

• Journal of Radiation Protection and Research
• /
• v.16 no.2
• /
• pp.41-54
• /
• 1991

This paper aimed to analyse dose sensitivity to the controllable parameters of indoor radon $(^{222}Rn)$ and its decay products (Rn-D) by applying the input~output linear system theory. Physical behaviors of $^{222}Rn\;&\;Rn-D$ were analyzed in terms of $(^{222}Rn)$ gas -generation, -migation and -infiltration to indoor environments, and the performance output-function, i. e. mean dose equivalent to Tracho-Bronchial (TB) lung region, was assessed to the following extented ranges of the controllable paramenters; a) the ventilation rate $constant({\lambda}_v)\;:\;0{\sim}50[h^{-l}].\;b)$ the attachment rate $constant({\lambda}_a)\;:\;0{\sim}500[h^{-l}].\;c)$ the unattached-deposition rate constant (${\lambda}^u_d)\;:\;0-50[h-l]$. A linear input-output model was reconstructed from the original models in literatures, as follows, which was modified into the matrices consisting of 111 nodal equations; a) indoor $^{222}Rn\;&\;Rn-D$ Behaviour; Jacobi-Porstendoerfer-Bruno model.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.121-125
• /
• 2006

To study the effects of plasticizer concentration and its ratio on the physical properties of silk fibroin films, polyethylene glycol (PEG) was used at 4 different concentrations; 1, 2, 3, $4.5\%$ (w/v). Tensile strength (TS) and water vapor permeability (WVP) increased with the increase of PEG concentration, while opposite trend was observed for percent elongation of silk fibroin films. WVP of silk fibroin films increased from $2.54\;ng{\cdot}m/m^2spa$ for $1\%$ of PEG to $5.41\;ng{\cdot}m/m^2sPa$ for $4.5\%$. In addition, a mixture of PEG and glycerol (Gly) as a plasticizer was used at the ratio of 100:0, 75:25, 50:50, 25:75, and 0:100 (w/w). Percent elongation of the films was improved to $130.95\%$ when the ratio of 75:25 was used. On the contrary, WVP of silk fibroin films increased with the decrease of the ratio of PEG:Gly. Effect of the plasticizer concentration and its ratio on the color of silk fibroin films was negligible. These results suggest that mixture of PEG and Gly as a plasticizer provide more flexible than PEG alone in silk fibroin films, and the best ratio of PEG to Gly was 75:25.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2000

We measure a beam diameter of scan and sub-scan direction of LSD (Laser Scanning Urnt) which uses $fheta$ lens produced by injecLion molding method as a scanning lens. While the measured beam diameter in scan direction, which is $62muextrm{m}$ to $68\mu\textrm{m}$, shows similar size comparing to the design beam diameter, the sub-scan beam diameter shows sIzable beam diameter deviation as much as 37 11m ranging from $78\mu\textrm{m}$ to $115\mu\textrm{m}$. Injection molding lens has the surface figure error due to the shrinkage III the cooling time and the internal distortion (birefringence) due to the uneven cooling conditIOn so that these bring about wavefront aberration (i.e., the enlargement of beam size), and are eventually expre~sed as the deterioration of the pdnting image. In this paper. we first measure and analyze beam diameter, birefringence (polanzation ratio), and asphedcal figure error of mIens in order to know the principle cause of the beam diameter deviation in sub-scan directIOn. And Lhen. through the analysis of a designed depth of focus and a calculated field curvature (imaging position of the optical axis directIon) using the above figure elTor data, we know Lhat the birefringence IS the main factor of sizable beam diameter deVIation in sub-scan direction. ction.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.721-725
• /
• 2010

Purpose: The survival of composite graft is dependent on three steps, (1) plasmatic imbibitions, (2) inosculation, and (3) neovascularization. Among the many trials to increase the survival rate of composite graft, prostaglandin E1 (PGE1) has beneficial effects on the microcirculatory level with vasodilating, antithrombotic, anti-inflammatory and neoangiogenic properties. Lipo-PGE1 which is lipid microspheres containing PGE1 had developed to compensate the systemic and local side effects of PGE1. This study was proposed to determine whether Lipo-PGE1 administration enhanced the survival of composite graft through neovascularization quantitatively in a rabbit ear model. Methods: Fourteen New Zealand White Rabbits each weighing 3~4 kg were divided in two groups: (1) intravenous Lipo-PGE1 injection group and (2) control group. A $2{\times}1\;cm$ sized, full-thickness rectangular composite graft was harvested in each auricle. Then, the graft was reaaproximated in situ using a 5-0 nylon suture. For the experimental group, $3{\mu}g$/kg/day of Lipo-PGE1 ($5{\mu}g$/mL) was administered intravenously through the marginal vein of the ear for 14 days. The control group was received no pharmacologic treatment. On the 14th postoperative day, composite graft of the ear was harvested and immunochemistry staining used Monoclonal mouse anti-CD 31 antibody was performed. Neoangiogenesis was quantified by counting the vessels that showed luminal structures surrounded by the brown color-stained epithelium and counted from 10 random high-power fields (400x) by independent blinded observer. Statistical analysis (Wilcoxon Signed Ranks test for nonparametric data) was performed using SPSS v12.0, with values of p<0.05 considered significant. Results: The mean number of the microvessels was $15.48{\pm}8.65$ in the experimental group and $9.82{\pm}7.25$ in the control group (p=0.028). Conclusion: The use of Lipo-PGE1 facilitated the neoangiogenesis, resulted in the improvement of the survival rate of graft. On the basis of this results, we could support wider application of Lipo-PGE1 for more effective therapeutic angiogenesis and successful survival in various cases of composite graft in the human.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.794-798
• /
• 1996

Solid solutions of the nonstoichiometric Dy1-xSrxCoO3-y system with the compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been synthesized by the solid state reaction at 1000 ℃ under atmospheric air pressure. The crystallographic structures of the solid solutions are analyzed by the powder X-ray diffraction patterns at room temperature. The analyses assign the compositions of x=0.00 and 0.25 to the orthorhombic system with space group of Pbnm/D2h16, the compositions of x=0.50 and 0.75 to the tetragonal system like a typical SrCoO2.86, and the composition of x=l.00 or SrCoO2.50 to the brownmillerite type system with space group of I**a. The reduced lattice volumes increase with x value due to the larger radius of Sr2+ ion than that of Dy3+ ion. The mole ratio of Co4+ ion to total Co ion with mixed valence state between Co3+ and Co4+ ions at B sites or τ value has been determined by an iodometric titration. All the samples except for the DyCoO3 compound show the mixed valnce state and thus the composition of x=0.50 has the maximum τ value in the system. The oxygen vacancies increasing with x value are randomly distributed over the crystal lattice except for the composition of x=l.00 which have the ordering of the oxygen vacancies. The nonstoichiometric chemical formulas of the Dy1-xSrxCo3+1-τCo4+τO3-(x-τ)/2 system are formulated from the x, τ, and y values. The electrical conductivity in the temperature range of 100 to 900 K increases with τ value linearly because of positive holes of the Co4+ ions in π* band as a conducting carrier. The activation energy of the x=0.50 as Ea=0.17 eV is minimum among other compouds. Broad and high order transition due to the overlap between σ* and π* bands broadened by the thermal activation is observed near 1000 K and shows a low temperature-semiconducting behavior. Magnetic properties following the Currie-Weiss law show the low to high spin transition in the cobaltate perovskite. Especially, the composition of x=0.75 presents weak ferromagnetic behavior due to the Co3+-O2--Co4+ indirect superexchange interaction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.499-503
• /
• 2022

La_0.7Sr_0.3MnO₃ precursor solution were prepared by a sol-gel method. La_0.7Sr_0.3MnO₃ thin films were fabricated by a spin-coating method on a Pt/Ti/SiO₂/Si substrate. Structural and electrical properties with the variation of sintering temperature were measured. All specimens exhibited a polycrystalline orthorhombic crystal structure, and the average thickness of the specimens coated 6 times decreased from about 427 nm to 383 nm as the sintering temperature increased from 740℃ to 830℃. Electrical resistance decreased as the sintering temperature increased. In the La_0.7Sr_0.3MnO₃ thin films sintered at 830℃, electrical resistivity, TCR, B-value, and activation energy were 0.0374 mΩ·cm, 0.316%/℃, 296 K and 0.023 eV, respectively.

• Ocean and Polar Research
• /
• v.32 no.3
• /
• pp.269-289
• /
• 2010

In Summer 2008, a multidisciplinary survey was conducted onboard R/V Haeyang 2000 to understand plankton response to the three distinct physico-chemical settings that developed in the Ulleung Basin of the East Sea. Baseline settings of hydrographic conditions included the presence of the thin (<20 m) Tsushima Surface Water (TSW) on top of the Tsushima Middle Water (TMW). It extends from the Korea Strait to $37^{\circ}N$ along the $130^{\circ}E$ and then turns offshore and encompasses the relatively saline (T>$26^{\circ}C$, S>33.7) Ulleung Warm Eddy surface water centered at $36.5^{\circ}N$ and $131^{\circ}E$. A relatively colder and saline water mass appeared off the southeastern coast of Korea. It was accompanied by higher nutrient and chlorophyll-a concentrations, suggesting a coastal upwelling. Most of the offshore surface waters support low phytoplankton biomass (0.3 mg chl-a $m^{-3}$). A much denser phytoplankton biomass (1-2.3 mg $m^{-3}$) accumulated at the subsurface layer between 20-50 m depth. The subsurface chlorophyll-a maximum (SCM) layer was closely related to the nutricline, suggesting an active growth of phytoplankton at depth. The SCM developed at shallow depth (20-30 m) near the coast and deepened offshore (50-60 m). A fucoxanthin/zeaxanthin ratio was high in coastal waters while it was low in offshore waters, which indicated that diatoms dominate coastal waters while cyanobacteria dominate offshore waters. The community structure and biomass of phytoplanktonare closely related to nitrogen availability. Zooplankton biomass was higher in the coastal region than in the offshore region while species richness showed an opposite trend. Zooplankton community structure retained a coastal/offshore contrast. These suggest that summer hydrography is a stable structure, lasting long enough to allow a hydrography-specific plankton community to evolve.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.113-120
• /
• 2005

An understanding of soil-structure interaction is the key to rational and economical design for laterally loaded drilled shafts. It is very difficult to formulate the ultimate lateral capacity into a general equation because of the inherent soil nonlincarity, nonhomogeneity, and complexity enhanced by the three dimensional and asymmetric nature of the problem though extensive research works on the behavior of deep foundations subjected to lateral loads have been conducted for several decades. This study reviews the four most well known methods (i.e., Reese, Broms, Hansen, and Davidson) among many design methods according to the specific site conditions, the drilled shaft geometric characteristics (D/B ratios), and the loading conditions. And the hyperbolic lateral capacities (H$_h$) interpreted by the hyperbolic transformation of the load-displacement curves obtained from model tests carried out as a part of this research have been compared with the ultimate lateral capacities (Hu) predicted by the four methods. The H$_u$ / H$_h$ ratios from Reese's and Hansen's methods are 0.966 and 1.015, respectively, which shows both the two methods yield results very close to the test results. Whereas the H$_u$ predicted by Davidson's method is larger than H$_h$ by about $30\%$, the C.0.V. of the predicted lateral capacities by Davidson is the smallest among the four. Broms' method, the simplest among the few methods, gives H$_u$ / H$_h$ : 0.896, which estimates the ultimate lateral capacity smaller than the others because some other resisting sources against lateral loading are neglected in this method. But it results in one of the most reliable methods with the smallest S.D. in predicting the ultimate lateral capacity. Conclusively, none of the four can be superior to the others in a sense of the accuracy of predicting the ultimate lateral capacity. Also, regardless of how sophisticated or complicated the calculating procedures are, the reliability in the lateral capacity predictions seems to be a different issue.

• Childhood Kidney Diseases
• /
• v.11 no.2
• /
• pp.220-228
• /
• 2007

Purpose : We studied the value of clinical signs, laboratory findings and $^{99m}technetium$ dime-rcaptosuccinic acid(DMSA) scan in predicting the presence of vesicoureteral reflux(VUR) in children with first febrile urinary tract infection(UTI). Methods : A retrospective analysis of 84 hospitalized children with first febrile UTI was performed. They underwent DMSA scan and voiding cystourethrography(VCUG) during the acute phase, and were divided into three groups according to the results of the VCUG: absence of VUR, mild(grade I-II) and severe VUR(grade III-V). We studied the relation of VUR to age, gender, fever duration, causative organism, white blood cell count, serum C-reactive protein and result of DMSA scan. Results : Among 84 patients, 6 had mild and 17 had severe VUR. Thirty-eight had abnormal DMSA scan. results Patients with VUR were older than those without VUR(P<0.01). There was a lower probability of infection with Escherichia coli in patients with severe VUR than in those with mild and absent VUR(P<0.01). An abnormal DMSA scan correlated with the presence and severity of VUR(P<0.05). Severe VUR was present in 10.9% of patients with normal DMSA scan. The sensitivity, specificity, positive and negative predictive values of the DMSA scan in predicting the presence of VUR were 69.6%, 63.9%, 42.1%, and 84.8%, respectively. Conclusion : An abnormal DMSA scan correlated to the presence and severity of VUR, but the sensitivity, specificity and positive predictive value of the DMSA scan were low. There-fore, patient with an abnormal DMSA scan requires a VCUG. In order to prevent missing the 10.9% of patients with severe VUR but normal DMSA scans, a VCUG should be performed in patient with normal DMSA scan.