• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.792-796
• /
• 2005

The methods of times series analysis have been recognized as important tools for assisting in solving problems related to the management of water resources. Especially, After more than 40 years the so-called Hurst effect remains an open problem in stochastic hydrology. Until now, its existence has been explained fly R/S analysis that roots in early work of the British hydrologist H.E. Hurst(1951). Today, the Hurst analysis is mostly used for the hydrological studies for memory and characteristics of time series and many methodologies have been developed for the analysis. So, there are many different techniques for the estimation of the Hurst exponent(H). However, the techniques can produce different characteristics for the persistence of a time series each other. We found that DFA is the most appropriate technique for the Hurst exponent estimation for both the shot term memory and long term memory. We analyze the SOI(Southern Oscillations Index) and 6 tree-ring series for USA sites by means of DFA and the BDS statistic is used for nonlinearity test of the series. From the results, we found that SOI series is nonlinear time series which has a long term memory of H=0.92. Contrary to earlier work of Rao(1999), all the tree- ring series are not random from our analysis. A certain tree ring series show a long term memory of H=0.97 and nonlinear property. Therefore, we can say that the SOI and tree-ring series may show long memory and nonlinearity.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.182-186
• /
• 2015

We investigated that effects of annealing ambient on the characteristics of functional nano thin film synthesized on glass substrate. The functional nano thin films were annealed by using rapid thermal annealing (RTA) equipment in vacuum, oxygen and nitrogen ambient, respectively. The hardness of the functional nano thin films were measured by a standard hardness testing method (ASTM D3363) such as a H-9H, F, HB and B-6B pencil (Mitsubishi, Japan). Also, the adhesion of the functional nano thin films were measured by a standard adhesion testing method (ASTM D3359) using scotch tape (3M, Korea). The contact angle of the functional nano thin films was measured by a contact angle analyzer (Phoenix 300 Touch, S.E.O.). The optical property of functional nano thin films was measured via UV-visible spectroscopy (S-3100, Scinco).

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.320-330
• /
• 2000

It is desirable to perform nondestructive evaluation (NDE) to assess material properties and part homogeneity because the manufacturing of carbon/carbon brake disks requires complicated and costly processes. In this work several ultrasonic techniques were applied to carbon/carbon brake disks (322mm ad, 135mm id) for the evaluation of spatial variations in material properties that are attributable to the manufacturing process. In a large carbon/carbon disk manufactured by chemical vapor infiltration (CYI) method, the spatial variation of ultrasonic velocity was measured and found to be consistent with the densification behavior in CYI process. Low frequency (e.g., 1-5MHz) through-transmission scans based on both amplitude and time-of-flight of the ultrasonic pulse were used for mapping out the material property inhomogeneity. Images based on both the amplitude and the time-of-flight of the transmitted ultrasonic pulse showed significant variation in the radial direction. The radial variations in ultrasonic velocity and attenuation were attributed to a density variation caused by the more efficient densification of pitch impregnation near the id and od and by the less efficient densification away from the exposed edged of the disk. Ultrasonic velocities in the edges of the disk. Ultrasonic velocities in the thickness direction were also measured as a function of location using dry-coupling transducers ; the results were consistent with the densification behavior. However, velocities in the in-plane directions (circumferential and radial) seemed to be affected more by the relative contents of fabric and chopped fiber, and less by the void content.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.8
• /
• pp.1445-1452
• /
• 2008

An open reading frame (ORF) encoding a putative epoxide hydrolase (EHase) was identified by analyzing the genome sequence of Sphingophyxis alaskensis. The EHase gene (seh) was cloned and expressed in E. coli. To facilitate purification, the gene was fused in-frame to 6$\times$ histidine at the C-terminus. The recombinant EHase (rSEH) was highly soluble and could be purified to apparent homogeneity by one step of metal affinity chromatography. The purified SEH displayed hydrolyzing activities toward various epoxides such as styrene oxide, glycidyl phenyl ether, epoxyhexane, epoxybutane, epichlorohydrin, and epifluorohydrin. The optimum activity toward styrene oxide was observed at pH 6.5 and $35^{\circ}C$. The purified SEH showed a cold-adapted property, displaying more than 40% of activity at low temperature of $10^{\circ}C$ compared with the optimum activity. Despite the catalytic efficiency, the purified SEH did not hydrolyze various epoxides enantioselectively. $K_m$ and $k_{cat}$ of SEH toward (R)-styrene oxide were calculated as 4$\pm$0.3 mM and 7.42$s^{-1}$ respectively, whereas $K_m$ and $k_{cat}$ of SEH toward (S)-styrene oxide were 5.25$\pm$0.3 mM and 10.08$s^{-1}$ respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1060-1065
• /
• 2005

An Independent Administrative Corporation Japan Agency for Marine-Earth Science and Technology (JAMSTEC) is developing light-and-small Autonomous Underwater Vehicles (AUV)$^{1)}$, named 'MR-X1' (Marine Robot Experimental 1), which can cruise, investigate and observe by itself without human's help. In this paper, we consider the motion control problem of 'MR-X1' and derive a controller. Since the dynamic property of 'MR-X1' is changed by the influence of the speed, the mathematical model of 'MR-X1' becomes the nonlinear model. In order to design a controller for 'MR-X1', we generally apply nonlinear control theories or linear control theories with some constant speed situation. If we design a controller by applying Linear Quadratic (LQ) optimal control theory, the obtained controller only compensates t e optimality at the designed speed situation, and does not compensate the stability at another speed situations. This paper proposes a controller design method using Linear Matrix Inequalities (LMIs)$^{2),3),4)}$, which can adapt the speed variation of 'MR-X1'. And examples of numerical analysis using our designed controller are shown.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.145-149
• /
• 2016

$(Bi_{1/2}Na_{1/2})_{0.94}Ba_{0.06}(Ti_{1-x}Nb_x)O_3$ (BNBTxNb) ceramics were investigated in terms of the crystal structure as well as the ferroelectric, dielectric, and piezoelectric properties. While little change was observed in the microstructure except for a slight decrease in the average grain size, a significant change was noticed in the temperature dependence of dielectric and piezoelectric properties. It was shown that the property changes are closely related to the downward shift in the position of the ferroelectric-to-relaxor transition temperature with increasing amount of Nb doping. A special emphasis is put on the fact that Nb doping is so effective at decreasing the ferroelectric-to-relaxor transition temperature that even at no more than 2 at.% Nb addition, the transition temperature was already brought down slightly below room temperature, resulting in the birth of a large strain at 0.46 %, equivalent to $S_{max}/E_{max}=767pm/V$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.34-42
• /
• 1986

An interface of a circular arc formed by two isotropic, homogeneous elastic materials is investigated. It is shown that L integral satisfies the conservation law for the interface if it is perfectly bonded, in frictionless contact or separated such as in a crack with the origin of the coordinate system being located at the center of the circular arc. The property of path independence of the L integral is applied to an interfacial crack problem, to obtain the stress intensity factors, where the interfacial crack is located along the arc of the circular inclusion embedded in infinite matrix. It is assumed here that the contact zone exist as in the model proposed by Comninou, thus removing the overlapping of the materials along the interface. Another example is shown for case of a circular interfacial crack in the matrix of finite size, where the stress intensity factors are determined by computing a value of the L integral numerically along the path far from the crack tip.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.63-76
• /
• 2014

Although most behavioral reaction times (RTs) for cognitive tasks exhibit positively skewed distributions, the majority of studies primarily rely on a measure of central tendency (e.g. mean) which can cause misinterpretations of data's underlying property. The purpose of current study is to introduce procedures for describing characteristics of RT distributions, thereby effectively examine the influence of experimental manipulations. On the basis of assumption that RT distribution can be represented as a convolution of Gaussian and exponential variables, we fitted the ex-Gaussian function under a maximum-likelihood method. The ex-Gaussian function provides quantitative parameters of distributional properties and the probability density functions. Here we exemplified distributional analysis by using empirical RT data from two conventional visual search tasks, and attempted theoretical interpretation for setsize effect leading proportional mean RT delays. We believe that distributional RT analysis with a mathematical function beyond the central tendency estimates could provide insights into various theoretical and individual difference studies.

• Nuclear Engineering and Technology
• /
• v.43 no.1
• /
• pp.19-24
• /
• 2011

These experimental studies are carried out to build a database for analyzing fuel performance in nuclear power plants. In particular, this study focuses on the mechanical and irradiation properties of three kinds of zirconium alloy (Alloy A, Alloy B and Alloy C) irradiated in the HANARO (High-flux Advanced Neutron Application Reactor), one of the leading multipurpose research reactors in the world. Yield strength and ultimate tensile strength were measured to determine the mechanical properties before and after irradiation, while irradiation growth was measured for the irradiation properties. The samples for irradiation testing are classified by texture. For the irradiation condition, all samples were wrapped into the capsule (07M-13N) and irradiated in the HANARO for about 100 days (E > 1.0 MeV, $1.1{\times}10^{21}\;n/cm^2$). These tests and results indicate that the mechanical properties of zirconium alloys are similar whether unirradiated or irradiated. Alloy B has shown the highest yield strength and tensile strength properties compared to other alloys in irradiated condition. Even though each of the zirconium alloys has a different alloying content, this content does not seem to affect the mechanical properties under an unirradiated condition and low fluence. And all the alloys have shown the tendency to increase in yield strength and ultimate tensile strength. Transverse specimens of each of the zirconium alloys have a slightly lower irradiation growth tendency than longitudinal specimens. However, for clear analysis of texture effects, further testing under higher irradiation conditions is needed.

• Korean Journal of Microbiology
• /
• v.46 no.2
• /
• pp.207-212
• /
• 2010

A bacterium producing the extracellular mannanase was isolated from Korean soybean paste. The isolate WL-8 has been identified as Bacillus subtilis on the basis on its 16S rRNA sequence, morphology and biochemical properties. The mannanase productivity of strain WL-8 was increased in LB broth by addition of wheat bran. The maximum mannanase productivity was reached to approximately 20 U/ml in LB medium supplemented with 6% wheat bran. A gene encoding the mannanase of WL-8 was cloned into Escherichia coli and its nucleotide sequence was subsequently determined. The mannanase gene consisted of 1,086 nucleotides encoding a polypeptide of 362 amino acid residues. The deduced amino acid sequence was highly homologous with those of several mannanases from B. subtilis belonging to GH family 26. Reaction temperature and pH profiles were investigated using the culture filtrate and cell-free extract of the recombinant E. coli carrying a WL-8 mannanase gene, respectively. Optimal conditions for the two fractions occurred at pH 5.5 and $60^{\circ}C$. The cell-free extract showed higher mannanase activity than the culture filtrate at above $60^{\circ}C$.