• Current Photovoltaic Research
• /
• v.8 no.3
• /
• pp.94-101
• /
• 2020

This study was trying to focus on achieving high efficiency of multi junction solar cell with thin film silicon solar cells. The proposed thin film Si-Ge/c-Si tandem junction solar cell concept with a combination of low-cost thin-film silicon solar cell technology and high-efficiency c-Si cells in a monolithically stacked configuration. The tandem junction solar cells using amorphous silicon germanium (a-SiGe:H) as an absorption layer of upper sub-cell were simulated through ASA (Advanced Semiconductor Analysis) simulator for acquiring the optimum structure. Graded Ge composition - effect of E_g profiling and inserted buffer layer between absorption layer and doped layer showed the improved current density (J_sc) and conversion efficiency (η). 13.11% conversion efficiency of the tandem junction solar cell was observed, which is a result of showing the possibility of thin film Si-Ge/c-Si tandem junction solar cell.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.25-28
• /
• 2000

As Internet users and network traffics are explosively increased, many researches have been done to provide fast and guaranteed Internet services. The results of these efforts are Multiprotocol Lab el Switching(MPLS) and differentiated service(Diff serv) emerging as a next generation backbone net work. In this paper, we make a research on gearing (or interworking) two technology needed to support end-to-end QoS and explain sequential procedure. And we simulate the L-LSP/E-LSP proposed by Working Group of IETF to be deployed to the DiffServ module which is implemented based on the MPLS network simulator and analyze the performance of the simulation result.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.410-413
• /
• 2004

In this paper, a simulator system for Fuel Cell Hybrid Electric Vehicles(FCHEV) is implemented using DSP boards with CAN bus. The subsystems of a FCHEV i.e., the fuel cell system, the battery system, the vehicle dynamics with the transmission mechanism are coded into 3 DSP boards. The power distribution control algorithm and battery SOC control are also coded into a DSP board. The real-time monitoring program is also developed to examine the control performance of power control and SOC control algorithms.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.5
• /
• pp.502-508
• /
• 2005

Fouling causes serious maintenance problems on heat exchanger tubes and process facilities. To avoid such fouling problems, numerous efforts have been tried. e.g., diagnosis of fouling, reducing and eliminating the fouling. etc.. The objective of the present study is to develop an innovative diagnostic system of fouling, which can detect the scaling attached to the wall non-homogeneously. The performance of the diagnostic system has been evaluated with a scaling simulator that generates scaling on tested tube wall. The measured values with the diagnostic system were compared with the amounts of the scaling generated by the simulator. In addition to, we showed the data that have been executed in field test for reliability verification.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1272-1273
• /
• 2011

A study on demonstration to development of simulator to assessment for loss saving of harmonic electric power energy. harmonic occurs to electric equipment like increase of terminal voltage, resonance phenomena occurrence and noise. To circulate of loss saving of harmonic electric power energy, we assessment electric power loss saving by harmonic and estimate loss saving of far-infrared radiation panel heating system.

• Journal of the Korean Vacuum Society
• /
• v.1 no.2
• /
• pp.269-276
• /
• 1992

경계 요소법을 이용하여 Finely-focused ion beam 시스템을 위한 전계형 시뮬레 이터를 개발하였다. 경계 요소법을 시뮬레이터에 적용함으로써 기존의 유한 요소법, 차분근 사법에서는 피할 수 없었던 내부격자망 구성이 불필요하게 됨에 따라 계산속도를 현저히 줄 일 뿐만 아니라 불규칙 경계에 대한 요소분할이 가능하게 되어 최적렌즈구조 설계의 새로운 요소인 전극구조의 모양을 자유롭게 시뮬레이션 할 수 있게 되었다. 또한 개발된 시뮬레이 터를 이용하여 최적조건을 만족하는 구조를 제안한다. 이때 렌즈설계조건은 beam half-angle 3.0 mrad, working distance 50mm, 빔에너지 퍼짐 (beam energy spread) 10eV, 가속에너지 35keV이다.

• Journal of the Korea Society for Simulation
• /
• v.4 no.2
• /
• pp.1-16
• /
• 1995

The performance of a computer system depends on the system architecture and workload, and the high performance required in many applications can be achieved by the scalability of the system architecture and workload. This paper presents scalable workload, a performance metric of scalable speedup and hierarchical modeling for the scalable computer system as well as the development of the object-oriented simulator spmplC++ Which is an advanced C++ version of the discrete event-driven simulation environment smplE. In addition, this paper presents two examples of applying scalable speedup, hierarchical modeling and simulator smplC++ to analyze the performance effect of the sclcbility in a multiprocessor system and a network-based client/server system.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.107-116
• /
• 1994

In the manufacturing of VLSI circuits, variations of device characteristics due to the slight differences in process parameters drastically aggravate the performances of fabricated devices. Therefore, it is very important to establish optimal process conditions in order to minimize deviations of device characteristics. In this paper, we used one-dimensional process simulator, SUPREM-II, and two dimensional device simulator, MINIMOS 4.0 in order to extract optimal process parameter which can minimize changes of the device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derived the dependence relations between process parameters and device characteristics. Here, we have suggested a method to extract process parameters from design trend curve(DTC) obtained by these dependence relations. And we have discussed short channel effects and device limitations by scaling down MOSFET dimensions.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.734-739
• /
• 2001

In this paper, we develop a six-axes machining center tool(MCT) and CAD/CAM system. The MCT consists of two mechanical parts, i.e., a X-Y-Z Cartesian coordinate typed MCT and a parallel-typed tilting table. Kinematics and singularity are accomplished to design the parallel-typed tilting table, and CAD/CAM system is developed for the six-axes MCT, which requires the commands of position as well as orientation for machining of complex shape. The CAD/CAM system has a tool path generator, a NC code generator and a graphic simulator. This paper designs the parallel-typed tilting table to meet the desired specification and presents the results of tool path, NC code and graphic simulation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.181-186
• /
• 2002

Fouling causes serious maintenance problems on heat exchanger tubes and process facilities. To avoid such fouling problems, numerous efforts have been tried, e.g., diagnosis of fouling, reducing and eliminating the fouling, etc.. The objective of the present study is to develop an innovative diagnostic system of fouling, which can detect the scaling attached to the wall non-homogeneously The performance of the diagnostic system has been evaluated with a scaling simulator that generates scaling on tested tube wall The measured values with the diagnostic system were compared with the amounts of the scaling generated by the simulator.