• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.159-165
• /
• 2000

In this paper, numerical study has been done for the improvement of the superdetonative ram accelerator performance and for the design optimization of the system. The objective function to optimize the premixture composition is the ram tube length required to accelerate projectile from initial velocity $V_o$ to target velocity $V_e$. The premixture is composed of $H_2,\;O_2,\;N_2$ and the mole numbers of these species are selected at design variables. RSM(Response Surface Methodology) which is widely used for the complex optimization problems is selected as the optimization technique. In particular, to improve the non-linearity of the response and to consider the accuracy and efficiency of the solution, design space stretching technique has been applied. Separate sub-optimization routine is introduced to determine the stretching position and clustering parameters which construct the optimum regression model. Two step optimization technique has been applied to obtain the optimal system. With the application of stretching technique, we can perform system optimization with a small number of experimental points, and construct precise regression model for highly non-linear domain. The error to compared with analysis result is only $0.01\%$ and it is demonstrated that present method can be applied more practical design optimization problems with many design variables.

• 한방재활의학과학회지
• /
• 제18권2호
• /
• pp.1-15
• /
• 2008

Objectives : The aim of this study was to know the immunity response of Haedongpibokhap-bang($H{\check{a}}it{\acute{o}}ngp{\acute{i}}f{\grave{u}}h{\acute{e}}-f{\bar{a}}ng$) to rheumatoid arthritis in collagen-induced arthritis(CIA) mice. Methods : For this purpose, Haedongpibokhap-bang($H{\check{a}}it{\acute{o}}ngp{\acute{i}}f{\grave{u}}h{\acute{e}}-f{\bar{a}}ng$) was orally administerd to mice with arthritis induced by collagen II and then value of immunocyte in spleen, draining lymph node and paw joint and cytokine(IL-6, $TNF-{\alpha}$), rheumatoid factor (IgG and IgM) in serum were measured. Results : 1. The arthritis index was significantly decreased. 2. In total cell counts of spleen, DLN and paw joint, the cells in spleen decreased while there was a significant increase in DLN and significant decrease in paw joint. 3. In lymph nodes, CD3+, CD3+/CD69+, CD4+, CD8+ cells increased significantly. 4. In joints, CD3+ and CD11+b/Gr-1+ cells decreased significantly. 5. Serum IL-6 and $TNF-{\alpha}$ were decreased significantly. 6. Production of serum IgG and IgM decreased significantly. Conclusions : The results present that Haedongpibokhap-bang($H{\check{a}}it{\acute{o}}ngp{\acute{i}}f{\grave{u}}h{\acute{e}}-f{\bar{a}}ng$) controls abnormal activity of immune system, inhibitig collagen-induced arthritis(CIA).

• 한국가축번식학회지
• /
• 제26권3호
• /
• pp.299-308
• /
• 2002

eCG(말 융모성성선자극 호르몬)$\beta$와 eLH(말 황체형성호르몬)$\beta$는 하나의 유전자로 코드 되어 있으며, eCG와 eLH는 당쇄의 구조에 있어서 차이가 있는데, LH는 sulfate가 CG는 sialylate가 수식되어 있다. eCG는 다른 동물에 있어서 강력한 FSH (난포자극)와 LH의 이중활성을 나타내어 아주 특이하고, 많은 탄수화물로 수식되어 있는 당단백질 호르몬이다. eCG의 이러한 이중활성은 성선 자극호르몬의 구조, 기능 및 수용체와 이들 호르몬과의 특이결합에 대하여 분자 생물학적인 관점에서 연구하는데 아주 흥미롭다 따라서, eCG는 당쇄의 구조와 생화학적인 기능에서 아주 특이한 분자이다. 이러한 중요점을 당쇄첨가부위의 돌연변이를 통하여 분석한 결과, LH의 활성에서는 eCG$\alpha$의 56번 당쇄가 필수불가결한 역할을 하지만, eCG$\beta$의 카르복실기 말단의 O-linked 당쇄는 중요하지 않은 것으로 관찰되었다. 한편, N- 및 O-linked 당쇄 모두는 FSH활성에는 중요한 기능을 가지고 있는데, 양쪽 당쇄의 제거는 오히려 FSH 활성을 증가시켰다. 따라서, eCG의 LH와 FSH의 이중활성은 $\alpha$의 N-linked 당쇄의 제거와, $\beta$의 O-linked 당쇄를 제거함으로써 완전히 분리할 수 있으며, eCG에 있어서 당쇄는 생화학적 활성에 대하여 아주 중요하게 작용한다는 새로운 사실이 밝혀졌다. 단일체인 eCG($\beta$의 C-terminal에 u를 연결한)도 eCG$\alpha$/$\beta$ 및 천연형 eCG와 비교한 결과 효율적으로 분비되어지고 완전한 LH와 FSH 활성을 나타내었다. 이러한 결과들은 eCG 분자에 있어서 지금까지 문제시되어왔던 LH활성을 나타내지 않고, 높은 FSH 활성만을 나타내는 특이한 모델을 만들 수가 있으며, 현재 단일체인 분자에 있어서 당쇄의 기능에 대한구축은 각 단체의 결합, 분비에 영향을 미치는 당쇄 돌연변이 연구에 아주 유용할 것으로 사료된다.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.552-561
• /
• 2021

For the purpose of manufacturing a high efficiency TiO₂ photocatalyst, B-doped TiO₂ photocatalysts are synthesized using a plasma electrolytic oxidation method in 0.5 M H₂SO₄ electrolyte with different concentrations of H₃BO₃ as additive. For the B doped TiO₂ layer fabricated from sulfuric electrolyte having a higher concentration of H₃BO₃ additive, the main XRD peaks of (101) and (200) anatase phase shift gradually toward the lower angle direction, indicating volume expansion of the TiO₂ anatase lattice by incorporation of boron, when compared with TiO₂ layers formed in sulfuric acid with lower concentration of additive. Moreover, XPS results indicate that the center of the binding energy peak of B1s increases from 191.45 eV to 191.98 eV, which suggests that most of boron atoms are doped interstitially in the TiO₂ layer rather than substitutionally. The B doped TiO₂ catalyst fabricated in sulfuric electrolyte with 1.0 M H₃BO₃ exhibits enhanced photocurrent response, and high efficiency and rate constant for dye degradation, which is ascribed to the synergistic effect of the new impurity energy band induced by introducing boron to the interstitial site and the improvement of charge transfer reaction.

• 생명과학회지
• /
• 제21권9호
• /
• pp.1205-1213
• /
• 2011

재조합 균주인 E. coli JM109/DL-3를 사용하여 carboxymethylcellulase를 생산하기 위한 배지의 최적 염 농도를 orthogonal array method (OAM)과 response surface method (RSM) 등과 같은 통계학적인 방법으로 확립하고 그 결과를 비교하였다. OAM에 기초를 한 Qualitek-4 Software를 사용하여 실험을 계획하고, 그 결과를 분석한 결과는 K2HPO4가 균체의 생장 및 carboxymethylcellulase의 생산에 미치는 영향이 가장 크다는 사실을 확인하였다. 균체의 생육에 최적인 $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$ 및 $(NH_4)_2SO_4$의 농도는 10.0, 1.0, 0.2 및 0.6 g/l이었으나, carboxymethylcellulase의 생산에 최적인 각 염들의 농도는 각각 5.0, 1.0, 0.4 및 0.6 g/l이었다. RSM에 기초를 한 Design-Expert Software를 사용하여 실험을 계획하고, 그 결과를 분석한 결과는 $K_2HPO_4$가 균체의 생장 및 carboxymethylcellulase의 생산에 가장 중요한 인자라는 사실을 확인하였다. 균체의 생장에 최적인 $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$ 및 $(NH_4)_2SO_4$의 농도는 7.44, 1.08, 0.22 및 0.88 g/l이었으나, carboxymethylcellulase의 생산에 최적인 각 염들의 농도는 각각 5.84, 0.69, 0.28 및 0.54 g/l이었다. 기본적으로 OAM에 기초한 software를 사용하여 얻은 결과는 RSM에 기초한 software를 사용하여 얻은 결과와 유사하였다. 최적 조건에서 재조합 균주 E.coli JM109/DL-3이 생산하는 carboxymethylcellulase의 생산은 B. amyloliquifacience DL-에 비하여 1.92배 증가하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권1호
• /
• pp.21-26
• /
• 1995

Highly sensitive and mechanically stable gas sensors have been fabricated using the microfabrication and micromaching techniques. The sensing material used to detect the offensive trimethylarnine ((CH$_{3}$)$_{3}$N) gas is 6 wt% $Al_{2}$O$_{3}$-doped, 1000.angs.-thick ZnO deposited by r. f. magnetron sputtering. The optimum operating temperature of the sensor is 350.deg.C and the corresponding heater power is about 85mW. Excellent thermal insulation is achieved by the use of a double-layer structure of 0.2.mu.m -thick silicon nitride and 1.4.mu.m-thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric pressure chemical vapor deposition(APCVD), respectively. The sensors are mechanically stable enough to endure at least 43, 200 heat cycles between room temperature and 350.deg. C.

• 한국전기전자재료학회논문지
• /
• 제30권8호
• /
• pp.525-529
• /
• 2017

Molybdenum oxide ($MoO_3$) offers pivotal advantages for high optical transparency and low light reflection. Considering device fabrication, n-type $MoO_3$ semiconductor can spontaneously establish a junction with p-type Si. Since the energy bandgap of Si is 1.12 eV, a maximum photon wavelength of around 1,100 nm is required to initiate effective photoelectric reaction. However, the utilization of infrared photons is very limited for Si photonics. Hence, to enhance the Si photoelectric devices, we applied the wide energy bandgap $MoO_3$ (3.7 eV) top-layer onto Si. Using a large-scale production method, a wafer-scale $MoO_3$ device was fabricated with a highly crystalline structure. The $MoO_3/p-Si$ heterojunction device provides distinct photoresponses for long wavelength photons at 900 nm and 1,100 nm with extremely fast response times: rise time of 65.69 ms and fall time of 71.82 ms. We demonstrate the high-performing $MoO_3/p-Si$ infrared photodetector and provide a design scheme for the extension of Si for the utilization of long-wavelength light.

• 동아시아식생활학회지
• /
• 제22권5호
• /
• pp.692-700
• /
• 2012

The antibacterial activity of the ethanol extract of Cornus officinalis against some bacteria related to foodborne illness and food spoilage was investigated. In the case of the disc diffusion assay, clear zones due to the inhibition of proliferation by Cornus officinalis extract were 8.5~18.3 mm at $4,000{\mu}g/disc$. The inhibitory effect of Cornus officinalis was as follows: Escherichia. coli ${\geq}$ Listeria monocytogenes ${\geq}$ E. coli O157:H7 > Bacillus cereus > Staphylococcus aureus > Pseudomonas aeruginosa > Salmonella typhimurium. In addition, the MIC of Cornus officinalis extract toward B. cereus was the lowest at 1,000 ppm. The extract inhibited the growth of E. coli, L. monocytogenes, E. coli O157:H7, and Bacillus cereus throughout the growth stage. However, the growth of P. aeruginosa, S. aureus, and S. typhimurium was only inhibited by the extract during the lag phase. The constituents of all cells tested were released, especially E. coli and E. coli O157:H7. Observation of the cells using SEM demonstrated a morphological change and disruption of cells in response to treatment with Cornus officinalis extract. Based on these findings, the ethanol extracts of Cornus officinalis showed strong antimicrobial activity against all tested bacteria, indicating that Cornus officinalis can be a useful natural antimicrobial reagent.

• 감성과학
• /
• 제21권1호
• /
• pp.45-58
• /
• 2018

As information and communication technologies (ICTs) become more advanced, consumers are able to experience retailing activities such as searching for products and services in online retail shops and for Internet-exclusive branded contents. Specifically, fashion retailers are facing the need to develop more novel experiential design than one another to maximize customers' experience in Internet websites and secure sustainable competency. Confirming methods of organic integration of experiential and visual features of both online and mobile channels is an important aspect of the study of extended consumers' interfaces of retail channels. Mehrabian and Russell's stimulus-organism-response (S-O-R) paradigm and Sugiyama and Andree's attention, interest, search, action, and share (AISAS) model were used for this research. Specifically, the present study considered the effect of e-commerce website features on consumers' emotional reactions (pleasure and arousal) and the consequent impact on online consumer behaviors (search, action, and share). Hence, plus the self-reported survey methods, each subject's psychophysiological indicators (i.e., pleasure and arousal) were measured to obtain more objective and reliable data and to redeem the results of the self-reported survey. Findings revealed the implications of the e-commerce website feature by comprehending the S-O-R paradigm and AISAS model and extending the understanding of the role of variables associated with comprehended frameworks based on psychophysiological data.

• Wind and Structures
• /
• 제6권6호
• /
• pp.451-470
• /
• 2003

The classical two-degree-of-freedom (2-d-o-f) "sectional model" is of common use to study the dynamics of suspension bridges. It takes into account the first pair of vertical and torsional modes of the bridge and describes well global oscillations caused by wind actions on the deck, yielding very useful information on the overall behaviour and the aerodynamic and aeroelastic response; however, it does not consider relative oscillations between main cables and deck. On the contrary, the 4-d-o-f model described in the two Parts of this paper includes longitudinal deformability of the hangers (assumed linear elastic in tension and unable to react in compression) and thus allows to take into account not only global oscillations, but also relative oscillations between main cables and deck. In particular, when the hangers go slack, large nonlinear oscillations are possible; if the hangers remain taut, the oscillations remain small and essentially linear: the latter behaviour has been the specific object of Part I (Sepe and Augusti 2001), while the present Part II investigates the nonlinear behaviour (coexisting large and/or small amplitude oscillations) under harmonic actions on the cables and/or on the deck, such as might be generated by vortex shedding. Because of the discontinuities and strong nonlinearity of the governing equations, the response has been investigated numerically. The results obtained for sample values of mechanical and forcing parameters seems to confirm that relative oscillations cannot a priori be excluded for very long span bridges under wind-induced loads, and they can stimulate a discussion on the actual possibility of such phenomena.