• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.71-80
• /
• 2013

설계를 위한 교량의 해석모델은 구조물의 안전성을 확보하기 위해 자중 및 외부하중은 되도록 크게, 구조물의 강성은 되도록 작게 평가하는 것이 일반적이다. 때문에 설계모델을 이용한 버페팅 응답은 실제 공용교량의 버페팅 응답과 차이를 나타낸다. 공용교량의 버페팅 응답을 정확하게 예측하기 위해서는 공용교량의 동적특성을 계측하여 해석모델이 계측값을 반영하도록 수정하여야 한다. 일반적으로, 실제교량과 동일한 고유진동수를 갖는 MBM(Measurement -based Model)을 구축하기 위해 설계모델의 다양한 물성치를 파라미터로 조정하며 계측된 고유진동수와 일치시키는 MTM(Manual Tuning Method)이 사용되고 있다. MTM은 파라미터의 초기치 설정에 따른 임의성이 높고 여러 수렴점을 가질 수 있어 분석에 상당한 노력이 소요된다. 본 연구는 버페팅해석에 널리 적용되고 있는 단일모드 주파수영역 해석법이 구조물의 모드형상, 고유진동수 및 감쇠비의 동적특성만을 이용하는 점에 착안하여 MTM과정 없이 설계모델의 버페팅 응답을 공용교량의 버페팅 응답으로 보정하는 BRCM(Buffeting Response Correction Method)을 제안하였다. BRCM은 설계모델의 모드형상 별 버페팅 응답을 공용교량의 고유진동수만으로 보정하는 방법이다. 공용교량의 고유진동수는 상시진동에 의한 계측 가속도로부터 산정하였다. BRCM의 적용성을 단순보 모델의 시간이력 버페팅해석을 수행하여 수치적으로 평가하였으며 공용교량모델을 이용한 버페팅해석결과, BRCM과 MTM의 응답 차이는 3% 이하로 나타났다. 공용교량의 실시간 계측시스템에 BRCM을 도입할 경우 사장교의 유지관리 효율성을 높일 수 있을 것으로 기대된다.

• 한국정보통신학회논문지
• /
• 제19권3호
• /
• pp.697-707
• /
• 2015

본 논문은 CNS/ATM의 감시 기술 중 하나인 ADS-B 1090ES 시스템의 수신기 복조부 설계 및 구현에 대한 연구를 하였다. 연구된 복조부는 국제 기술문서 RTCA DO-260B와 EUROCAE ED-129에서 요구하는 모든 성능을 만족하며, 수신감도, 다이내믹 레인지 등의 성능 향상을 위하여 기존에 다중 진폭 샘플 복조 방식 중 베이스라인 다중 샘플 기술을 적용한 단일신호처리 기법을 제안하였다. 또한, 다중신호레벨튜닝 기법을 제안하여 단일신호처리 기법의 단점을 보완하고 송신출력 편차 및 수신기 하드웨어 제작 공정에 따른 균일하지 못한 수신 감도 레벨 차이에 대한 수신율 저하 문제를 최소화 하였다. 측정 결과 제안된 기법을 적용한 수신기는 다이내믹 레인지 0~-87dBm의 성능과 MTL -90dBm이 측정되었다. 이 결과는 ADS-B 1090ES 지상수신 장비의 국제 기술기준에서 요구하는 기준보다 -3dBm 낮은 우수한 성능을 나타냈으며, 이와 유사한 변조방법을 사용하는 시스템에 널리 응용이 가능할 것으로 사료된다.

• 에너지공학
• /
• 제13권2호
• /
• pp.144-151
• /
• 2004

희박 예혼합 연소방식을 채용한 150MW급 대형 저 NOx 가스터빈 연소기에서 발생하는 급격한 연소진동 발생을 저감하였다. 희박 예혼합 연소기에서는 연소튜닝이 적절히 이루어지지 많은 경우에 연소불안정에 기인한 높은 연소진동의 발생과 함께 NOx 배출량이 높아질 가능성이 있다. 대상 가스터빈의 연소 모드 전환 중에 발생하는 연소진동의 주파수와 크기는 각각 80Hz및 4-9psi로 나타났으며, 대기온도가 낮아짐에 따라 연소진동의 크기가 증가하는 경향을 보였다. 연소진동에 영향을 미치는 인자로서 버너노즐로 공급되는 연료유량을 균등화하기 위한 연소튜닝과 연소모드 전환시 연료라인에 연료를 미리 공급(prefilling)하는 것이 화염안정에 매우 큰 효과가 있었다. 그 결과 연소모드 전환 중에 발생하는 연소진동을 2.5psi까지 저감할 수 있었으며, 150 MW기저부하 운전 중에 NOx 발생량을 35-43ppm(15% $O_2$)으로 유지할 수 있었다.

• 대한전자공학회논문지SD
• /
• 제44권8호
• /
• pp.65-73
• /
• 2007

본 논문에서는 UMTS용 수신기를 위한 저 전력 CMOS 연속-시간 시그마-델타 모듈레이터에 대해 논한다. 저 전력 동작수행을 위한 연속 시간 모듈레이터의 루프 필터는 선형성이 우수하고, 튜닝 회로가 비교적 간단한 active-RC 필터로 구성하였다. 본 모듈레이터의 구조는 전력 효율을 높이기 위해 24의 OSR (Oversampling Ratio)의 3차 4비트 단일 루프로 구성하였고, 초과 루프 지연 시간에 의한 성능 저하를 방지하기 위해 반주기 지연 제환 경로를 추가하였다. 제작한 회로의 SNR, SNDR, Dynamic range는 각각 71dB, 65dB, 74dB로 측정되었다. 설계한 연속-시간 시그마-델타 모듈레이터는 0.18-um CMOS 표준공정으로 제작하였고, 1.8V의 단일 전원 전압에서 15mW의 전력을 소모한다.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.28-43
• /
• 2013

Recent trends toward the collaborations among various sectors of academia and research areas have brought interests and significances in new activities especially in the fashion and textile areas. One of the collaboration examples is the recent research projects on 3D virtual clothing systems based on the 3D CAD software. The 3D virtual clothing systems provide simulated apparels with high degrees of fidelity in terms of color, texture, and structural details. However, since real fabrics exhibit strong nonlinearity, anisotropy, viscoelasticity, and hysteresis, the 3D virtual clothing systems need fine tuning parameters for the simulation process. In this study, characteristics of silk fabrics, which are woven by using degummed silk and raw silk yarns, are being analyzed and compared. Anisotropic properties may be measured as warp and filling direction properties separately in woven fabrics, such as warp tensile stress or filling bending rigidity. Hysteretic properties may be measured as bending hysteresis or shear hysteresis by using KES measurements. These data provide deformation-force relationships of the fabric specimen. Three-dimensional effects obtained when using these characteristic fabrics are also analyzed. The methods to control the three-dimensional appearance of the sewn fabric specimens when utilizing a programmable microprocessor-based motor device, as prepared in this study, are presented. Based on the physical and mechanical properties measured when using the KES equipment, the property parameters are being into a 3-dimensional virtual digital clothing system, in order to generate a virtual clothing product based on the measured silk fabric properties.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.282-286
• /
• 2000

In this paper, magneto-rheological(MR) damper is studied for vibration control of large infra structures under earthquake. Generally, active control devices need a large control force and a high power supply system to reduce the vibration effectively. Large and miss tuned control force may induce the dangerous situation such that the generated large control force acts to amplify the structural vibration. Recently, to overcome the weaknesses of the active control, the semi-active control method is suggested by many researchers. Semi-active control uses the passive control device of which the characteristics can be modified. Control force of the semi-active device is not generated from the actuator with power supply. It is generated as a dynamic reaction force of the device same as in the passive control case, so the control system is inherently stable and robust. Unlike the case of passive control, control force of semi-active control is adjusted depending on the measured response of the structure, so the vibration can be reduced more effectively against various unknown environmental loads. Magneto-rheological(MR) damper is one of the semi-active devices. Dynamic characteristics of the MR material can be changed by applying the magnetic fields. So the control of MR damper needs only small power. Response time of MR to the input voltage is very short, so the high performance control is possible. MR damper has a high force capacity so it is adequate to the vibration control of large infra structure. Because MR damper has a nonlinear property, normal control method used in active control may not be effective. Clipped optimal control, modified bang-bang control etc. have been suggested to MR damper by many researchers. In this study, sliding mode fuzzy control(SMFC) is applied to MR damper. Genetic algorithm is used for the controller tuning. To verify the applicability of MR damper and suggested algorithm, numerical simulation on the aseismic control is carried out. Simulation model is three-story building structure, which was used in the paper of Dyke, et al. The control performance is compared with clipped optimal control. The present results indicate that the SMFC algorithm can reduce the earthquake-induced vibration very effectively.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1074-1081
• /
• 2007

This paper presents a method for real-time face detection and tracking which combined Adaboost and Camshift algorithm. Adaboost algorithm is a method which selects an important feature called weak classifier among many possible image features by tuning weight of each feature from learning candidates. Even though excellent performance extracting the object, computing time of the algorithm is very high with window size of multi-scale to search image region. So direct application of the method is not easy for real-time tasks such as multi-task OS, robot, and mobile environment. But CAMshift method is an improvement of Mean-shift algorithm for the video streaming environment and track the interesting object at high speed based on hue value of the target region. The detection efficiency of the method is not good for environment of dynamic illumination. We propose a combined method of Adaboost and CAMshift to improve the computing speed with good face detection performance. The method was proved for real image sequences including single and more faces.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.937-960
• /
• 2015

Tuned mass dampers (TMDs) have been a prevalent vibration control device for suppressing excessive vibration because of environmental loadings in contemporary tall buildings since the mid-1970s. A TMD must be tuned to the natural frequency of the primary structure to be effective. In practice, a TMD may be assembled in situ, simultaneously with the building construction. In such a situation, the respective dynamic properties of the TMD device and building cannot be identified to determine the tuning status of the TMD. For this purpose, a methodology was developed to obtain the parameters of the TMD and primary building on the basis of the eigenparameters of any two complex modes of the combined building-TMD system. The theory was derived in state-space to characterize the nonclassical damping feature of the system, and combined with a system identification technique to obtain the system eigenparameters using the acceleration measurements. The proposed procedure was first demonstrated using a numerical verification and then applied to real, experimental data of a large-scale building-TMD system. The results showed that the procedure is capable of identifying the respective parameters of the TMD and primary structure and is applicable in real implementations by using only the acceleration response measurements of the TMD and its located floor.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.439-442
• /
• 2003

In order to solve the difficulties of parameter settings in SA algorithm, an improved practical SA algorithm is proposed by employing the threading techniques, appropriate software structures, and dynamic adjustments of temperature parameters. Threads provide a mechanism to realize a parallel processing under a disperse environment by controlling the flux of internal information of an application. Thread services divide a process by multiple processes leading to parallel processing of information to access common data. Therefore, efficient search is achieved by multiple search processes, different initial conditions, and automatic temperature adjustments. The proposed are methods are evaluated, for three types of Traveling Salesman Problem (TSP) (random-tour, fractal-tour, and TSPLIB test data)are used for the performance evaluation. The experimental results show that the computational time is 5％ decreased comparing to conventional SA algorithm, furthermore there is no need for manual parameter settings. These results also demonstrate that the proposed method is applicable to real-world vehicle routing problems.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1092-1098
• /
• 2002

This paper discusses the composition of the theory of reinforcement teaming, which is applied in real-time teaming, and evolutionary strategy, which proves its the superiority in the finding of the optimal solution at the off-line teaming method. The individuals are reduced in order to team the evolutionary strategy in real-time, and new method that guarantee the convergence of evolutionary mutations are proposed. It is possible to control the control object varied as time changes. As the state value of the control object is generated, applied evolutionary strategy each sampling time because of the teaming process of an estimation, selection, mutation in real-time. These algorithms can be applied, the people who do not have knowledge about the technical tuning of dynamic systems could design the controller or problems in which the characteristics of the system dynamics are slightly varied as time changes. In the future, studies are needed on the proof of the theory through experiments and the characteristic considerations of the robustness against the outside disturbances.