• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.54-61
• /
• 2006

Basically corrugated board is composed of three layers of different basis weight and stock composition. Warp is well-known for one of the most important problems of corrugated board production. Warp is caused by difference of hygro-expansibility of linears between top and bottom. This research was performed to evaluate the effect of paper properties on the warp of corrugated board. To evaluate warp, dynamic expansion properties of paper was tested using DPM(dynamic penetration measuring system). The effects of sizing, stock composition and wet-pressing on dynamic expansion properties were also evaluated. Commercial base papers showed different dynamic expansion property depending on stock composition and papermaking operation. Sizing treatment decreased and wet-pressing increased the amount of dynamic expansion. To reduce warp of corrugated board, management of dynamic expansion of base papers should be controlled by manipulating moisture, heat and tension, using a variety of adjustments available on the corrugator.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.16-21
• /
• 2010

In this study, the variations of transformed impact factors and load carrying capacity of highway bridges measured from the state of expansion joint are evaluated. the field loading tests were performed on the highway bridge with damaged expansion joint to investigate the variation of the load carrying capacity. From the field loading tests in case that damaged expansion joint exist or do not exist, the static displacements and dynamic displacements were measured, and TIF were calculated, respectively. dynamic test is performed in order to estimate dynamic displacement and TIF according to the level of damage of expansion joint. From the results of TIF, the load carrying capacity of highway bridges with damaged expansion joint were estimated.

• 대한산업공학회지
• /
• 제12권1호
• /
• pp.81-94
• /
• 1986

A shortest path dynamic programming formulation is proposed and attemped to solve an uncapacitated expansion sequencing problem. It is also compared with the Extended Binary State Space approach with total capacity. Difficulties and merits associated with the formulation are discussed. The shortest path dynamic programming lacks the separability condition and an optimal solution is not guaranteed. However it has other merits and seems to be the practical solution procedure for the expansion sequencing problem in a sense that it finds near optimal solution with less state evaluations.

• 공업화학
• /
• 제23권2호
• /
• pp.143-147
• /
• 2012

퍼라이트의 팽창은 고온에서 수초안에 이루어지므로 팽창현상을 실험으로 확인이 어려워 이를 해석하기 위한 버블팽창모사가 필요하다. 이를 위해 용융 퍼라이트 내에 매우 작은 미세 버블이 존재하며 수분 증기가 버블 쪽으로 확산되어 버블이 성장하고 퍼라이트가 팽창하는 모델을 세워 팽창모사를 수행하였다. 수분증기의 확산으로 버블이 성장하여 퍼라이트가 팽창될 때 퍼라이트의 동적 온도는 감소하였다. 버블의 동적압력은 퍼라이트 용융상 내에서 수분 증기가 확산함에 따라 초기에는 증가하지만, 버블의 급격한 팽창 이후에는 오히려 감소함을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.213-223
• /
• 2017

Bridges are lifeline and integral components of transportation system that are susceptible to seismic actions, their vulnerability assessment is essential for seismic risk assessment and mitigation. The vulnerability assessment of bridges common in Pakistan is very important as it is seismically very active region and the available code for the seismic design of bridges is obsolete. This research presents seismic vulnerability assessment of three real case simply supported multi-span reinforced concrete bridges commonly found in northern Pakistan, having one, two and three bents with circular piers. The vulnerability assessment is carried through the non-linear dynamic time history analyses for the derivation of fragility curves. Finite element based numerical models of the bridges were developed in MIDAS CIVIL (2015) and analyzed through with non-linear dynamic and incremental dynamic analyses, using a suite of bridge-specific natural spectrum compatible ground motion records. Seismic responses of shear key, bearing pad, expansion joint and pier components of each bridges were recorded during analysis and retrieved for performance based analysis. Fragility curves were developed for the bearing pads, shear key, expansion joint and pier of the bridges that first reach ultimate limit state. Dynamic analysis and the derived fragility curves show that ultimate limit state of bearing pads, shear keys and expansion joints of the bridges exceed first, followed by the piers ultimate limit state for all the three bridges. Mean collapse capacities computed for all the components indicated that bearing pads, expansion joints, and shear keys exceed the ultimate limit state at lowest seismic intensities.

• 산업경영시스템학회지
• /
• 제33권1호
• /
• pp.71-79
• /
• 2010

This paper addresses capacity expansion planning model of distribution center under usability of public distribution center. For discrete and finite time periods, demands for distribution center increase dynamically. The capacity expansion planning is to determine the capacity expansion size of private distribution center and usage size of public distribution center for each period through the time periods. The capacity expansion of private distribution center or lease usage of public distribution center must be done to satisfy demand increase for distribution center. The costs are capacity expansion cost and excess capacity holding cost of private distribution center, lease usage cost of public distribution center. Capacity expansion planning of minimizing the total costs is mathematically modelled. The properties of optimal solution are characterized and a dynamic programming algorithm is developed. A numerical example is shown to explain the problem.

• 대한임베디드공학회논문지
• /
• 제8권1호
• /
• pp.43-50
• /
• 2013

The narrow dynamic range of most smart phone cameras is severely limited. It usually is narrower than the dynamic range of most scenes. So we proposes a illuminance dynamic range expansion using multi-point knee for smart phone camera. Such as logarithmic functions the proposed method compress the image sensor output signal. Additionally, the proposed method was merged into the gamma that is essential circuit for any cameras. To justifying multi-point knee effectiveness, we configure the control and quality evaluation system for smart phone camera module. Experimental results show that the lost information by cut off and saturated affectively reconstructed in darker and in brighter areas. Finally this methods have advantage to implement without any changing hardware for conventional smart phones.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.313-321
• /
• 2011

한국표준과학연구원(Korea Research Institute of Standards and Science, KRISS)에는 초음파간섭 수은주압력계(ultrasonic interferometer manometer, UIM), 정적형표준기(static volume expansion system, SVES), 오리피스형 정압표준기(orifice-type dynamic expansion system, ODES) 등 세 개의 주요한 국가 진공표준기가 있다. 이 장치들의 불확도 평가를 위해 각각 변수들의 측정 및 계산 모델을 개발하였다. 국제표준화기구(International Organization for Standardization, ISO) 지침에 따라 표준기들의 확장불확도(expanded uncertainty, U)를 계산하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.106-113
• /
• 2014

Rotor eccentricity is one of the major factors that directly influence the security of horizontal electrical machines, and the critical speed of the shaft has a close relationship with vibration. This paper deals with the influence of thermal expansion on the rotor eccentricity and critical speed in large dry submersible motors. The dynamic eccentricity (where the rotor is still turning around the stator bore centre but not its own centre) and critical speed of a three-phase squirrel-cage submersible induction motor are calculated via hybrid analytical/finite element method. Then the influence of thermal expansion is investigated by simulation. It is predicted from the study that the thermal expansion of the rotor and stator gives rise to a significant air-gap length decrement and an inconspicuous slower critical speed. The results show that the thermal expansion should be considered as an impact factor when designing the air gap length.

• Architectural research
• /
• 제10권2호
• /
• pp.21-26
• /
• 2008

The number of measured degrees of freedom for detecting the damage of any structures is usually less than the number of model degrees of freedom. It is necessary to expand the measured data to full set of model degrees of freedom for updating modal data. This study presents the expansion methods to estimate all static displacements and dynamic modal data of finite element model from the measured data. The static and dynamic methods are derived by minimizing the variation of the potential energy and the Gauss's function, respectively. The applications illustrate the validity of the proposed methods. It is observed that the numerical results obtained by the static approach correspond with the Guyan condensation method and the derived static and dynamic approaches provide the fundamental idea for damage detection.