• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1966-1973
• /
• 2001

The Jacobian matrix of the equations of motion of a system using velocity transformation technique is derived via variation methods to apply the implicit integration algorithm, DASSL. The concept of generalized coordinate partitioning is used to parameterize the constraint set with independent generalized coordinates. DASSL is applied to determine independent generalized coordinates and velocities. Dependent generalized coordinates, velocities, accelerations and Lagrange multipliers are explicitly retained in the formulation to satisfy all of the governing kinematic and dynamic equations. The derived Jacobian matrix of a system is proved to be valid and accurate both analytically and through solution of numerical examples.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.375-381
• /
• 2005

This paper presents linear algebraic equations in the form of recursive formula to compute elastokinematic characteristics of a suspension system. Conventional methods of elastokinematic analysis are based on nonlinear kinematic constrant equations and force equilibrium equations for constrained mechanical systems, which require complicated and time-consuming implicit computing methods to obtain the solution. The proposed linearized elastokinematic equations in the form of recursive formula are derived based on the assumption that the displacements of elastokinematic behavior of a constrained mechanical system under external forces are very small. The equations can be easily computerized in codes, and have the advantage of sharing the input data of existing general multi body dynamic analysis codes. The equations can be applied to any form of suspension once the type of kinematic joints and elastic components are identified. The validity of the method has been proved through the comparison of the results from established elastokinematic analysis software. Error estimation and analysis due to piecewise linear assumption are also discussed.

• Journal of information and communication convergence engineering
• /
• 제9권3호
• /
• pp.341-346
• /
• 2011

Wireless sensor networks (WSNs) are formed by a great quantity of sensor nodes, which are consisted of battery-powered and some tiny devices. In WSN, both efficient energy management and Quality of Service (QoS) are important issues for some applications. Real-time services are usually employed to satisfy QoS requirements in critical environment. This paper proposes a real-time MAC (Medium Access Control) protocol with extended backoff scheme for wireless sensor networks. The basic idea of the proposed protocol employs (m,k)-firm constraint scheduling which is to adjust the contention window (CW) around the optimal value for decreasing the dynamic failure and reducing collisions DBP (Distant Based Priority). In the proposed protocol, the scheduling algorithm dynamically assigns uniform transmitting opportunities to each node. Numerical results reveal the effect of the proposed backoff mechanism.

• 대한산업공학회지
• /
• 제26권1호
• /
• pp.17-26
• /
• 2000

This paper presents an integrated order scheduling method with the improved DRP concept for multi-echelon distribution system that has the constraint of limited production capacity of producers. The proposed method reflects the dynamic characteristics of inventory level changes in the regional and central distribution center. The simulation is done with two models : the traditional DRP method and the proposed method presented in this paper. From the results, the latter is more efficient than the former in cost, customer's service level as well as balanced production load on each producer.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.46-55
• /
• 2006

A robust motion controller based on self-organizing fuzzy control(SOFC) and feed-back tracking control technique is proposed for a two-wheel driven mobile robot. The feed-back control technique of the controller guarantees the robot follows a desired trajectory. The SOFC technique of the controller deals with unmodelled dynamics of the vehicle and uncertainties. The computer simulations are carried out to verify the tracking ability of the proposed controller with various driving situations. The results of the simulations reveal the effectiveness and stability of the proposed controller to compensate the unmodelled dynamics and uncertainties.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.427-436
• /
• 2007

The catenary of a high-speed electrical train is modeled by the finite elements with the upper suspension wire, lower contact wire, and droppers, and the dynamic contact between the catenary and the pantograph is numerically analyzed by solving the whole equations of motion of the pantograph and the catenary system subjected to the contact condition. For the stability of the numerical solution, with the cubic spline interpolation of the catenary displacement, the velocity and acceleration constraints as well as the displacement constraint are imposed on the contact point. Through the various numerical examples, it is shown that the dropper positions as well as the static deflection are crucial to determine the contact and separation of the pantograph of a high-speed train.

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.106-118
• /
• 2007

This paper present a new optimization model to generate aggregate production planning by considering electric cost. The new Time Of Switching (TOS) electric type is introduced by switching over Time Of Day (TOD) and Time Of Use (TOU) electric types to minimize the electric cost. The fuzzy demand and Dynamic inventory tracking with multiple plant capacity are modeled to cover the uncertain demand of customer. The constraint for minimum hour limitation of plant running per one start up event is introduced to minimize plants idle time. Furthermore; the Optimal Weight Moving Average Factor for customer demand forecasting is introduced by monthly factors to reduce forecasting error. Application is illustrated for multiple cement mill plants. The mathematical model was formulated in spreadsheet format. Then the spreadsheet-solver technique was used as a tool to solve the model. A simulation running on part of the system in a test for six months shows the optimal solution could save 60% of the actual cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1053-1057
• /
• 1987

In this paper, we have studied a communication protocol which may provide Audio/Video data transmission in real time. Auido/Video data have its own characteristics. A new transport protocol with realtime constraint has been designed and implemented which performs dynamic error control and flow control depending on the characteristics of transmitted Audio/Video data. Since the receiving data can be predicted from the previously received data using the prediction function in Auido/Video data transmission, these functions are introduced in our transport protocol that may possibly improve the speed of data transmission and give a real time response. We have tested our transport protocol and measured the performance by the simulation. We assume that our transport protocol would be used in LAN environment. Our prime purpose is to provide a reliable and real time Auido/Video data transmission service.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.113-121
• /
• 2014

This paper considers a scheduling problem in a two-machine flowshop with outsourcing strategy incorporated. The jobs can be either processed in the first machine or outsourced to outside subcontractors. This paper wants to determine which jobs to be processed in-house and which jobs to be outsourced. If any job is decided to be outsourced, then an additional outsourcing cost is charged The objective of this paper is to minimize the sum of scheduling cost and outsourcing cost under a budget constraint. At first this paper characterizes some solution properties, and then it derives solution procedure including DP (Dynamic Programming) and B&B (Branch-and-Bound) algorithms and a greedy-type heuristic. Finally the performance of the algorithms are evaluated with some numerical tests.

• 한국지능시스템학회논문지
• /
• 제14권5호
• /
• pp.557-562
• /
• 2004

이 연구는 T-S 퍼지시스템으로 모델 되는 비선형 시스템의 견실한 혼합 ${H_2}/{H_{\infty}}$ 필터 설계문제를 취급한다. 플랜트에 포함된 다양한 종류의 불확실성을 취급하기 위하여 적분 2차 제약조건을 사용하였다. 필터 설계문제의 해가 존재할 충분조건을 볼록 최적화 기법을 사용하여 효과적으로 풀 수 있는 선형 행렬 부등식의 형태로 제시한다. 제시된 방법을 예시하기 위해서 수치 예를 보여준다.