• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.17-19
• /
• 2005

In this paper, using B-splines as universial approximators, we have obtained a plant parametrization which permits the construction of an adaptive observer. The particular property of this parametrization is that the dynamic order of the filters in this design does not depend on the number of parameters in the plant parametrization. This appears to be a beneficial property especially because the number of such parameters tends to be very high for universial approximator based designs.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.331-334
• /
• 2003

In this paper, using B-splines as universial approximators, we have obtained a plant parametrization which permits the construction of an adaptive observer. The particular property of this parametrization is that the dynamic order of the filters in this design does not depend on the number of parameters in the plant parametrization. This appears to be a beneficial property especially because the number of such parameters tends to be very high for universial approximator based designs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.444-449
• /
• 2001

The purpose of the work is to improve comfort of a car seat, especially dynamic comfort which affects driver's discomfort during the long time driving. Definition of dynamic comfort was made before the investigation of which parameter affects seat comfort. In order to optimize design parameters so as to maximize seat comfort as well as to know the cause of discomfort, benchmarking on a target vehicle and competitive vehicles was performed, which showed both the vibration transmission characteristics and the compression set due to dynamic loading should be reduced. As a solution ball rebounds was increased by about 10％ of the original foam, which showed reduction of S.E.A.T. value by 10％ and of compression set by 60％.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.318-325
• /
• 2008

In this paper, a dynamic backoff adjustment method of IEEE 802.15.4 is proposed for time-critical sporadic data in a noisy factory environment. For this, a superframe of IEEE 802.15.4 is applied to a real-time mixed data (periodic data, sporadic data, and non real-time message) transmission in factory communication systems. To guarantee a channel access of real-time sporadic(non-periodic) data, a transmission method using the dynamic backoff is applied to wireless control networks. For the real-time property, different initial BE, CW parameters are used for the dynamic backoff adjustment method. The simulat-ion results show an enhancement of the real-time performance of sporadic emergency data. The proposed method provides the channel access of real-time sporadic data efficiently, and guarantee real-time transmission simultaneously within a limite-d timeframe.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.189-194
• /
• 2014

Drape property, one of the dynamic properties, is significant element of appearance and silhouette of garment. There are two methods of measuring drape property: objective method and subjective method. The purpose of this study is to search convenient method of measuring drape property which affects the appearance of garment. The method of this study was as below: First, the drape properties of ten various fabrics were measured within both of professional paper ring and visual handy measuring instrument. Second, Pearson's correlation coefficient was analyzed in order to analyze the correlation of two results of the experiments. This study used professional paper ring and visual handy measuring instrument on ten samples. Both of the results from the paper ring and visual handy measuring instrument were very similar in terms of drape property. Significant correlation between results of the professional paper ring and visual handy method indicates the efficiency of the visual handy measuring at school or work environment etc.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.91-102
• /
• 2005

This study dealt with correlation analysis of binder stiffness with deformation strength and dynamic creep property of asphalt mixtures for evaluation of applicability of deformation strength $(S_D)$. Two aggregates, with maximum size of 13mm and eight binders were used to produce 16 different mixtures. The stiffness of binder $(G^*/sin\delta)$ was measured using DSR at $64^{\circ}C$. Final deformation(FD) and dynamic stability(DS) were measured by dynamic creep (DC) test, and SD was measured by Kim test for each mixture. Results of correlation analysis between $G^*/sin\delta$, and $S_D$, m and DS showed that correlation with binder stiffness and deformation strength was the highest $(R^2>0.88)$. There was good correlation between DS, FD with $S_D$. The results indicated that rut-resistance property of mixture is better reflected in $S_D$ test than FD or DS of dynamic creep test. Therefore, it is concluded that $S_D$ can be possibly used for evaluation of rut resistance of asphalt concretes with a good reliability if the procedure is standardized.

• The KIPS Transactions:PartD
• /
• v.8D no.5
• /
• pp.613-622
• /
• 2001

As logistic environment of digital resources is rapidly changing, protection of the intellectual property for digital resources has been recognized as one of important issues. Digital Rights Management (DRM) has taken much interests from ISP, authors and publishers of digital content as an integrated approach to create a reliable environment for access and the use of digital resource. In this paper we proposed a dynamic digital rights management system based on adaptive agent theory (ARPA : Adaptive Resource Protection Agent) to address problems facing contemporary DRM approaches : static rights management problem solving and strengthened monitoring/tracking system. We introduced a dynamic mission control scheme to realize dynamic digital rights management. We incorporated adaptive agent theory to implement on-and off-line tracking and protection. Through the implementation of protype system, the process, the process dynamic digital rights protection will be demonstrated.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.901-906
• /
• 2018

Due to the development of display technologies for images, the resolution and quality of images are increasing day by day. In accordance with the development of the display technology, researches have been actively conducted on technologies for converting and displaying existing images to higher resolution and quality. Since the results of theses studies are included in the image signal processor, hardware implementation is indispensable. In this paper, we propose a real-time HDR(High Dynamic Range) conversion hardware implementation of LDR(Low Dynamic Range) image using luminance distribution. The proposed method extracts the features of the image using the histogram of the luminance distribution, and extends the luminance and color based on the extracted features. In addition, when the proposed method is designed by hardware IP(Intellectual Property) and its performance is verified, 4K DCI(Digital Cinema Image) can be handled at a rate of 30fps at 265.46MHz.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.930-935
• /
• 2005

In order to synthesis of the materials and modulus for floor impact sound reduction, we investigated effect on dynamic elastic modulus of floor impact sound reduction materials and module made by inorganic porous materials, EVA chips and so on. We find correlation property between dynamic elastic modulus and light-weight impact noise. And we measured the dynamic elastic modulus of materials and module for floor impact sound reduction. And we predicted reduction efficiency on floor Impact Noise of those. The dynamic elastic modulus is reduced by increase of filler contents and filler species. When the materials for floor impact sound reduction is consisted of l5wt% EVA Chip and l5wt% inorganic porous materials, its dynamic elastic material is the lowest. And when the module is consisted of PE (upper side), PS embossing board(lower side) and the materials for floor impact sound reduction(middle), its dynamic elastic material is the lowest.

• Interaction and multiscale mechanics
• /
• v.4 no.2
• /
• pp.165-171
• /
• 2011

In this study, we proposed a three-dimensional dynamic model under the diffuse interface description for the single crawling cell. From the developed model, we described the clear evolution processes for crawling neutrophil and assessed the reliable quantitative chemotactic property, which confirmed the high possibility of adequate predictions. To establish the system considering of multiple mechanisms such as, diffusion, chemotaxis, and interaction with surface, a diffuse interface model is employed.