• 대한안전경영과학회지
• /
• 제7권5호
• /
• pp.213-231
• /
• 2005

Assignable causes producing temporary deviation from the underlying system can influence on process adjustment and process monitoring in dynamic feedback control system. In this paper, the influence of assignable causes on EWMA forecasts and compensatory variables are derived for a dynamic feedback control system. An example is presented to confirm the impact numerically through the analysis of a data.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.83-89
• /
• 2010

In this paper, the dynamic response of a CNC 5 Axles machining center was analyzed and then controlled passively by using the dynamic absorber. For the simplification of the theoretical approach, the CNC 5 Axles machining center was modeled as a flexible beam(Bed) having a point mass(Column), two discrete systems(a Table-set and a dynamic absorber). Specifically by using the dynamic absorber, the dynamic response of a Table-set which be caused by the vibration of a flexible beam, was reduced down to the infinitesimal level. The optimal design factors of the dynamic absorber were obtained from the minimization of the cost function. It was found that the natural frequencies of a UT-380 machining center be varied due to the movement of the Table-set. In view of the dynamic response of a Table-set, the larger spring stiffness and mass of the dynamic absorber were found to give the greater reduction.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.65-75
• /
• 2019

In this article, the dynamic fracture instability characteristics, including dynamic crack propagation and crack branching, in PMMA brittle solids under dynamic loading are investigated using the discrete element method (DEM) simulations. The microscopic parameters in DEM are first calibrated using the comparison with the previous experimental results not only in the field of qualitative analysis, but also in the field of quantitative analysis. The calibrating process illustrates that the selected microscopic parameters in DEM are suitable to effectively and accurately simulate dynamic fracture process in PMMA brittle solids subjected to dynamic loads. The typical dynamic fracture behaviors of solids under dynamic loading are then reproduced by DEM. Compared with the previous experimental and numerical results, the present numerical results are in good agreement with the existing ones not only in the field of qualitative analysis, but also in the field of quantitative analysis. Furthermore, effects of dynamic loading magnitude, offset distance of the initial crack and initial crack length on dynamic fracture behaviors are numerically discussed.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1997년도 추계학술발표회 논문집
• /
• pp.47-53
• /
• 1997

Dynamic models have been developed for the coal gasification process by using a modular approach method. The complete unit is divided, for the convenience of the analysis, into several sections, viz. the coal feeding system, the gasifier, the gas cooler, the valves, the pumps, etc. The dynamic behaviour of each section is described in mathematical terms and each term is modulized into several submodels consisting of the complete process. To represent the behaviour of the fluid flow, the hydraulic network is proposed. Results for the more important system variables are presented and discussed. There dynamic models enable process and control engineers to quickly review a wide range of alternative operating and control strategies and help operators to easily understand the process dynamics and eventually can be applied to the design of commercial scale IGCC plants.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1120-1123
• /
• 1996

DMC(Dynamic Matrix Control) algorithm has been successfully used in industries for more than a decade. It can handle constraints and easily extended to MIMO case. The application of DMC, however, is limited to the open loop stable process because it uses the FIR(Finite Impulse Response) or FSR(Finite Step Response) model. Integrating process widely used in chemical process industry, is the representative open loop unstable process. The disturbance rejection of DMC is relatively poor due to the assumption that the current disturbance is equivalent to the future disturbance. We propose the IDMC(Improved Dynamic Matrix Control) for the integrating process, as well as non-integrating process. IDMC has shown better disturbance rejection using multi-step ahead predictor for the disturbance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.201-202
• /
• 2006

To analyze the dynamic characteristics of the bundle drawing process, we employed a Random Phase Spectrum method to generate stochastic test signals that had a given autocorrelation function. And the spectra of the dynamics of the process outputs were obtained, based on the dynamic model of the bundle drawing process. Results showed that the RPS method was very effective to generate stochastic signals that had an exponential function form. The drawing process had the traits that there existed a special frequency range, incurring the process resonance.

• 융합정보논문지
• /
• 제7권5호
• /
• pp.169-175
• /
• 2017

회계정보시스템은 회계자료를 취합 처리하여 의사결정자에게 가치 있는 정보를 제공한다. 그러나 최근의 급속한 환경변화에 있어 지속경영으로서의 회계정보시스템은 성과를 최적화하기 위한 조직의 필요성에 적합되어야 한다. 동적 회계정보시스템의 역량은 회계처리와 조직의 성과를 향상시킬 것으로 기대한다. 동적역량틀(Dynamic capabilities framework:DCF)을 이용함으로서 동적인 회계정보시스템의 역량은 세 가지 관점에서 시너지효과를 발휘할 수 있는 것으로 기대한다. 1) 유연한 회계정보시스템, 2) 보완적인 비즈니스 지능시스템 및 3) 정보기술 자산을 통한 회계 전문화의 세 가지 영역의 시너지효과를 발휘할 수 있을 것이다. 본 연구를 통하여 동적 회계정보시스템 역량, 회계처리 성과 및 기업성과의 상관성을 검증하고자 한다. 연구결과, 동적 회계정보시스템 자원을 개발함으로써 조직의 가치를 더할 수 있는 것으로 나타났다. 본 연구는 회계정보시스템 환경의 성과산출에 지렛대 역할을 할 수 있는 가이드를 제공할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.49-54
• /
• 1994

A dynamic model for the cutting process in the end milling process is developed. This model, which describes the dynamic response of the end mill, the chip load geometry including tool runout, the dependence of the cutting forces on the chip load, is used to predict the dynamic cutting force during the end milling process. In order to predict accurately cutting forces and tool vibration, the model, which uses instantaneous specific cutting force, includes both regenerative effect and penetration effect. The model is verified through comparisons of model predicted cutting force with measured cutting forces obtained from machining experiments.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.97-103
• /
• 1997

Designing a feedback controller requires a dynamic model of the process to be controlled. But the GMA welding process models have not been fully developed for many reasons such as complexity of the welding process and lack of reliable sensors. Because of the complexity of the welding system, we obtained a dynamic model for control using system identification routines, rather than derived a model from fundamental physical laws. The controller was designed based on the experimentally derived linear dynamic model of the welding process. In order to demonstrate application of the designed controller, the simulation was carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.638-642
• /
• 1994

The objectives of this work are to present the dynamic simulation strategy based on cluster-modular approach and to develop a prototype simulator. In addition, methods for the improvement of computational efficiency and applicability are studied. A process can be decomposed into several clusters which consist of strongly coupled units depending upon the process dynamics or topology. The combined approach of simultaneous and sequential simulation based on the cluster structure is implemented within the developed dynamic process simulator, MOSA(Multi Objective Simulation Architecture). Dynamic simulation for a utility plant is presented as a case study in order to prove the efficiency and flexibility of MOSA.