• 제목/요약/키워드: Dynamic Change

검색결과 2,887건 처리시간 0.038초

동특성 변화로부터 구조물의 변경질량 위치 해석 (Analysis of Mass Position Detection Using the Change of the Structural Dynamic Characteristics)

  • 이정윤
    • 한국공작기계학회논문집
    • /
    • 제13권2호
    • /
    • pp.120-126
    • /
    • 2004
  • This study proposed the analysis of mass position detection due to the change of the mass and strifeless of structure by using the original and modified dynamic characteristics. The method is applied to examples of the cantilevers beam and the 3 degrees of freedom system by modifying the mass. The predicted detection of the mass positions and magnitudes are in good agrement with the present study from the structural reanalysis using the modified mass.

자동변속기내 유성기어비 변화에 의한 동력전달계의 동적특성 (Dynamic Characteristics of Automatic Transmission System Due to the Change of Planetary Gear Ratio)

  • 박영일;김영석
    • 한국정밀공학회지
    • /
    • 제15권10호
    • /
    • pp.120-127
    • /
    • 1998
  • In this study the dynamic characteristics of automatic transmission system due to the change of the planetary gear ratio is studied. To study the power flow and shift quality for power transmission the simulation program is developed using the modeling and analysis technique. The results from this study will be used in designing the basic structure of automatic transmission using planetary gear system.

  • PDF

닫힌-사슬 운동이 뇌졸중 환자의 체중지지율과 균형능력에 미치는 영향 (The Effect of Closed-Chain Exercise on Weight Supporting Rate and Balance Ability in Stroke Patients)

  • 김희권
    • PNF and Movement
    • /
    • 제9권1호
    • /
    • pp.1-9
    • /
    • 2011
  • Purpose : The purpose of this study is to analyze the effect of closed-chain exercise on weight supporting rate change within hemiplegic side and static dynamic balance ability in stroke patients. Methods : The subjects of the study were 13 hemiplegic patients who carried out closed-kinematic chain exercise program over 6 weeks. The exercises of the program are stand to sit with stall bar, stair-up & down by a hemiplegic leg and bridging exercise crossing the non-hemiplegic leg onto the hemiplegic leg. Each exercise was carried out over 3 sets of 10reps. Results : The results of this study were summarized as follows: 1. After intervention, there was a statistically significant change in the weight supporting rate within hemiplegic and non-hemiplegic side(P<0.05). 2. After intervention, there was a statistically significant change in the static balance(FICSIT-4) ability(P<0.05). 3. After intervention, there was a statistically significant change in the dynamic balance(FSST, TUG, FRT) ability(P<0.05). Conclusion : The results of the study suggests that closed-chain exercise program in stroke patients improves their weight supporting rate and enhance the static dynamic balance.

The impact of artificial discrete simulation of wind field on vehicle running performance

  • Wu, Mengxue;Li, Yongle;Chen, Ning
    • Wind and Structures
    • /
    • 제20권2호
    • /
    • pp.169-189
    • /
    • 2015
  • To investigate the effects of "sudden change" of wind fluctuations on vehicle running performance, which is caused by the artificial discrete simulation of wind field, a three-dimensional vehicle model is set up with multi-body dynamics theory and the vehicle dynamic responses in crosswind conditions are obtained in time domain. Based on Hilbert Huang Transform, the effects of simulation separations on time-frequency characteristics of wind field are discussed. In addition, the probability density distribution of "sudden change" of wind fluctuations is displayed, addressing the effects of simulation separation, mean wind speed and vehicle speed on the "sudden change" of wind fluctuations. The "sudden change" of vehicle dynamic responses, which is due to the discontinuity of wind fluctuations on moving vehicle, is also analyzed. With Principal Component Analysis, the comprehensive evaluation of vehicle running performance in crosswind conditions at different simulation separations of wind field is investigated. The results demonstrate that the artificial discrete simulation of wind field often causes "sudden change" in the wind fluctuations and the corresponding vehicle dynamic responses are noticeably affected. It provides a theoretical foundation for the choice of a suitable simulation separation of wind field in engineering application.

일사에 의한 온도변화에 따른 강사장교의 동적특성 변화 (Modal Parameter variation of Steel Cable-stayed Bridge Considering Solar Radiation)

  • 김상효;조광일;박주양
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2006년도 정기 학술대회 논문집
    • /
    • pp.1040-1047
    • /
    • 2006
  • Bridges are exposed to constantly changing weather conditions and temperature. The temperature change is induced by a change in atmospheric temperature and solar radiation. Atmospheric temperature change acts on the whole structure. Thus, it is relatively easy to consider in the design. Solar radiation, however, causes un-uniform temperature distribution in the structure, depending on the shape of the structure and its shadows. Un-uniform temperature distribution causes a torsional moment in bridge section and a deformation of bridge. A deformation can make differences of dynamic and static behavior of bridge. In this study, the method for analysis of static and dynamic behavior considering deformation and changes of material properties due to temperature variation was developed. By this method, it is found from dynamic analysis results that the change of frequency in analysis model is similar with test results of public used cable-stayed bridge. When a temperature goes down, a frequency goes up. And it is found that the change of frequency is affected by the change of material properties.

  • PDF

Dynamic Simple Correspondence Analysis

  • Choi Yong-Seok;Hyun Gee Hong;Seo Myung Rok
    • Communications for Statistical Applications and Methods
    • /
    • 제12권1호
    • /
    • pp.199-205
    • /
    • 2005
  • In general, simple correspondence analysis has handled mainly correspondence relations between the row and column categories but can not display the trends of their change over the time. For solving this problem, we will propose DSCA(Dynamic Simple Correspondence Analysis) of transition matrix data using supplementary categories in this study, Moreover, DSCA provides its trend of the change for the future by predicting and displaying trend toward the change from a standard point of time to the next.

압연 공정에서의 판 두께 제어 (Thickness control in metal-strip milling process)

  • 신기현;홍환기;김광배;오상록;안현식
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.1141-1146
    • /
    • 1993
  • The problem of tension control in metal-strip processing line is discussed. A new mathematical dynamic model which relates tension change, motor-speed change and roll-gap change is developed. Through the computer simulation of this model, parameter sensitivity, the tension transfer phenominon, and static and dynamic characteristics of strip tension were studied. Guidelines are developed to help one selecting locations of the master-speed drive in multi-drive speed control for tension adjustment and reducing the effect of interaction between tension and roll gap control.

  • PDF

OPTIMAL CONSUMPTION, PORTFOLIO, AND LIFE INSURANCE WITH BORROWING CONSTRAINT AND RISK AVERSION CHANGE

  • Lee, Ho-Seok
    • 충청수학회지
    • /
    • 제29권2호
    • /
    • pp.375-383
    • /
    • 2016
  • This paper investigates an optimal consumption, portfolio, and life insurance strategies of a family when there is a borrowing constraint and risk aversion change at the time of death of the breadwinner. A CRRA utility is employed and by using the dynamic programming method, we obtain analytic expressions for the optimal strategies.

STRUCTURAL CHANGES IN DYNAMIC LINEAR MODEL

  • Jun, Duk B.
    • 한국경영과학회지
    • /
    • 제16권1호
    • /
    • pp.113-119
    • /
    • 1991
  • The author is currently assistant professor of Management Science at Korea Advanced Institute of Science and Technology, following a few years as assistant professor of Industrial Engineering at Kyung Hee University, Korea. He received his doctorate from the department of Industrial Engineering and Operations Research, University of California, Berkeley. His research interests are time series and forecasting modelling, Bayesian forecasting and the related software development. He is now teaching time series analysis and econometrics at the graduate level.

  • PDF

동적응답의 변화를 고려한 점용접부의 진동피로해석 (Vibration Fatigue Analysis for Multi-Point Spot-Welded SPCC Structure Considering Change of Dynamic Response)

  • 강기원;장일주;김정규
    • 대한기계학회논문집A
    • /
    • 제34권9호
    • /
    • pp.1193-1199
    • /
    • 2010
  • 점용접은 자동차 산업에서 차체 구조물의 대표적 접합방법으로서 차량에 피로하중이 작용할 경우 구조물 전체의 파손 발생이전에 점용접부 일부에 조기 피로파손의 발생가능성이 존재한다. 이러한 점용접부의 국부적 파손은 차량 구조물의 동적 반응 및 이에 따른 피로거동의 변화를 야기할 가능성이 존재한다. 따라서 차량과 같이 스펙트럼하중을 받는 구조물의 피로수명 평가를 위해서는 이러한 점용접부의 국부적 파손에 의한 동적 반응의 변화를 고려하여야 한다. 본 논문에서는 점용접부의 누적피로손상으로 인한 동적반응의 변화를 고려한 진동피로해석을 수행하였다. 이에 필요한 S-N 선도는 전단 점용접 시험편에 대한 일정진폭 피로시험을 통하여 획득하였다. 또한 스펙트럼하중하의 점용접부의 피로수명은 유한요소해석에 기반한 진동피로해석을 통하여 평가하였다.