• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1147-1154
• /
• 2005

In this paper, we propose some PAPR(Peak to Average Power Ratio) reduction methods using WHT(Walsh Hadamard Transform) to reduce high PAPR generated in OFDM system because of multi carrier modulation. These proposed methods are the methods which has additional PAPR reduction performance without a loss of bandwidth efficiency and a large increment of calculation complexity than common PAPR reduction methods by combining the WHT with some common methods. In this paper, we propose two PAPR reduction methods made by combining a SLM(Selective Mapping) and DSI(Dummy Sequence Insertion) with a WHT. From simulation result, we can find that the PAPR reduction methods using a WHT can get about 1 dB additional PAPR reduction performance than common PAPR reduction methods; they are SLM and DSI. And, because our proposed methods have not only PAPR reduction effect, but also frequency diversity effect, more stabile data transmission is possible in nonlinear HPA and multipath fading channel.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.159-164
• /
• 2016

A wireless communication system is required to be implemented with the low power circuits because it uses a battery having a limited energy. Therefore, the current mode circuit has been studied because it consumes constant power regardless of the frequency change. However, the clock-feedthrough problem is happened by leak of stored energy in memory operation. In this paper, we suggest the current memory circuit to minimize the clock-feedthrough problem and introduce a technique for ultra low power operation by inducing dynamic voltage scaling. The current memory circuit was designed with BSIM3 model of $0.35{\mu}m$ process and was operated in the near-threshold region. From the simulation result, the clock-feedthrough could be minimized when designing the memory MOS Width of $2{\mu}m$, the switch MOS Width of $0.3{\mu}m$ and dummy MOS Width of $13{\mu}m$ in 1MHz switching operation. The power consumption was calculated with $3.7{\mu}W$ at the supply voltage of 1.2 V, near-threshold voltage.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.12-21
• /
• 2018

This study was a cross-sectional survey of the effects of pregnancy necessity recognition on emotional happiness and mediation effect of health control behavior on it. A total of 200 participants in the study were collected from structured questionnaire online and the data collection was from July $1^{st}$ to July $31^{st}$, 2018. Health control behavior questionnaire was developed by Wallston, K.A., Wallston, B.S. & Devellis, R (1978), Emotional happiness was analyzed by using PANAS (positive and negative affect schedule) developed by Watson, Clark and Tellegen (1988). The collected data were chai-square($X^2$), Pearson correlation, Dummy regression analysis, simple regression analysis, and the mediated effect analysis by SPSS 18.0. As a result, Under statistical significance, there were differences in the recognition of pregnancy necessity were depending on religion, participant's age, number of siblings, thought of optimal marriage age(p<0.05). More siblings, more religious, older age, and more recognized the pregnancy necessity. The analysis of Pearson correlation with the pregnancy necessity, health control behavior, and emotional happiness reveled that it was relevant (p<0.01). Dummy regression analysis showed that people who thought that pregnancy was necessary were 0.700 times more likely to felt emotional happiness that people who thought it was unnecessary (p<0.01). Analysis on the mediation of health control behavior, in which the effects of pregnancy recognition on emotional happiness, showed that it was effect (other people's health control behavior: B:.299, p<0.01, internal health control behavior : B:.217, p<0.05). Based on these results, this study suggested that to promote pregnancy recognition, families with brother and sister should be programmed with recommendations for exercise and alcohol abstinence, religious belief and health control programs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.34-43
• /
• 2002

This paper deals with a standard cell placement which is based on a quadratic programming. This paper proposes a new additional force to reduce the cell overlap and to get a uniform distribution of cells. The additional force is not concerned with interconnections between cells, but it is determined by the density of a placement area. In this paper, we modelled that the new additional force is a force which is caused by the dummy fixed cell. And it is used for the global placement. Proposed placement method is compared with TimberWolf v7.0 and Itools vl.4. Proposed placer achieved 7.5% average reduction in wirelength in non timing driven mode, 5.0% average reduction in wlrelength in timing driven mode compared to TimberWolf v7.0. And we got a comparable result to Itools vl.4.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.3
• /
• pp.29-37
• /
• 2001

The purpose of this study is to determine the suitable illuminance model of an urban neighborhood park. To this end, 1 dependent variable and 11 independent variables were set, and multiple regression analysis was applied to find correlation between variables and the model. The results of this study are as follows; 1) Among 11 independent variables abstracted to study suitable illuminance model of an urban neighborhood park, as a result of analysis on correlation between suitable illuminance of a dependent variable and activity space by using dummy variables, activity type and illuminance by spaces the suitable illuminance required for an urban neighborhood park was much influenced by activity type, and the fact that the activity was not limited to a specific space. 2) As a result of multiple regression analysis, independent variables influencing the suitable illuminance model of an urban neighborhood park were activity space, illuminance by spaces, seated activity, standing activity, and sporting activity. And, for relative contribution of independent variables to suitable illuminance, activity with sporting showed an importance 22 times higher than seated activity. When the central square(Sp_1) of activity spaces was set to reference category using dummy variables, it showed a contribution 52 times higher than sorting space(Sp_7) and the central square as the most important variable. 3) It was analyzed that suitable illuminance of an urban neighborhood part was most influenced by sporting activity but the relative contribution of a sporting space where activity with sporting occurs was least in view of the function of the space. Very high illuminance is required to accept high activity, and if illuminance at a certain space becomes too high, it may influence the illuminance of other spaces, and may consequently have a negative effect on the suitable illuminance of an urban neighborhood park. The results of this study were mainly for teenagers and young adults in their twenties, so further concrete studies which consider gender and a wider age range are needed in the future. Based on subsequent study, suitable illuminance by spaces shall be suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.758-766
• /
• 2007

High peak-to-average power ratio(PAPR) is one of serious problems in the orthogonal frequency division multiplexing(OFDM) systems. This paper proposes a PAPR reduction technique for limited feedback multiple input multiple output(MIMO) OFDM systems. The proposed method is based on the null space of the MIMO channel where a dummy signal is made in the channel's null space and then, subtracted from the original signal to reduce the PAPR. First, we show that a problem occurs when the existing method is directly applied to limited feedback MIMO case. Then, a weight function for the dummy signal is proposed to mitigate the degradation of the receiver performance while still reducing PAPR significantly. The weight function is derived from a constrained nonlinear optimization problem to minimize the mean square error between the received signal and its ideal signal. Simulation results shows that the proposed technique provides about 2.5dB PAPR reduction with 0.2dB bit-error probability loss.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1039-1048
• /
• 2011

This research develops a basic design structure for scuba diving wetsuits suitable for the shape of Korean men in their 30's as well as enhances the reduction rate for underwater activity. The clothing pressure and fitness tests were performed using four different types of body suits. The usable data of the tests were coded for further statistical analysis that includes one way-ANOVA test and S-N-K Multiple Range Test by using SPSSWIN 17.0. An analysis of the results shows: (1) The results of the clothing pressure test (using a dummy) indicated that the larger the reduction rate, the stronger the clothing pressure gets (with an exception on the knee area). It has great impact on clothing pressure with regards to the different body parts. The different reduction rates should be applied to body parts accordingly. (2) In the case of test subjects, the overall mean values of the clothing pressure were lower than the ones with the dummy (attributable to the cushion function of body skin and muscle as well as the high stretch of the fabric). (3) In evaluating the subjective fit test of four types of body suits, a statistically significant difference was found in the relation between pattern reduction rates and all parts of the body. It was revealed that the reduction rate of 'B' pattern (X: 4%, Y: 3%) was the most suitable pattern and the 'B' pattern scored highest in the motion functional fit test performed by a test subject.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.599-607
• /
• 2011

In this paper, a reaction-force compensation system for an XY linear motion stage, without an additional external isolation structure or extra motors, is developed. This system consists of a movable magnet track, a spring, a dummy weight, and a dedicated sensor module that measures the relative positions of the movable magnet track with respect to the motor coil. The reaction force compensation system is modeled, and simulations are carried out to optimize design parameters such as the moving distance of the magnet track, the transmission force, the dummy weight, and the allowed size of the mechanism. An XY linear motion stage is built, incorporating the reaction force compensation system, and the performance of the system is verified experimentally. For acceleration and deceleration values of 10 m/$s^2$, 85% of the reaction force is absorbed by the reaction force compensation system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1187-1191
• /
• 2011

In this paper, the development of an adjustable load limiter is presented, which is a component of the seat belt. The adjustable load limiter is loaded at different levels for varied weights and heights of occupant. The recent regulation FMVSS 208 demands strict safety standards for different percentiles of dummy size. In this work, high- and low-level load conditions are proposed according to dummy scale and thoracic injury criteria. The suggested load conditions were verified by performing a sled test using the benchmark model. A dual-level load limiter has been developed on the basis of these tests. Experiments were conducted on the product performance, and finite element analysis was carried out; the results confirmed the points for improvement.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.33-46
• /
• 2004

A finite element model development of a 50th percentile male cervical spine is presented in this paper. The model consists of rigid, geometrically accurate vertebrae held together with deformable intervertibral disks, facet joints, and ligaments modeled as a series of nonlinear springs. These deformable structures were rigorously tuned, through failure, to mimic existing experimental data; first as functional unit characterizations at three cervical levels and then as a fully assembled c-spine using the experimental data from Duke University and other data in the NHTSA database. After obtaining satisfactory validation of the performance of the assembled ligamentous cervical spine against available experimental data, 22 cervical muscle pairs, representing the majority of the neck's musculature, were added to the model. Hill's muscle model was utilized to generate muscle forces within the assembled cervical model. The muscle activation level was assumed to be the same for all modeled muscles and the degree of activation was set to correctly predict available human volunteer experimental data from NBDL. The validated model is intended for use as a post processor of dummy measurement within the simulated injury monitor (SIMon) concept being developed by NHTSA where measured kinematics and kinetic data obtained from a dummy during a crash test will serve as the boundary conditions to "drive" the finite element model of the neck. The post-processor will then interrogate the model to determine whether any ligament have exceeded its known failure limit. The model will allow a direct assessment of potential injury, its degree and location thus eliminating the need for global correlates such as Nij.