Browse > Article

DEVELOPMENT OF FINITE ELEMENT HUMAN NECK MODEL FOR VEHICLE SAFETY SIMULATION  

Lee, I.H. (Hankook ESI)
Choi, H.Y. (Department of Mechanical Engineering, Hongik University)
Lee, J.H. (IPS International)
Han, D.C. (School of Mechanical and Aerospace Engineering, Seoul National University)
Publication Information
International Journal of Automotive Technology / v.5, no.1, 2004 , pp. 33-46 More about this Journal
Abstract
A finite element model development of a 50th percentile male cervical spine is presented in this paper. The model consists of rigid, geometrically accurate vertebrae held together with deformable intervertibral disks, facet joints, and ligaments modeled as a series of nonlinear springs. These deformable structures were rigorously tuned, through failure, to mimic existing experimental data; first as functional unit characterizations at three cervical levels and then as a fully assembled c-spine using the experimental data from Duke University and other data in the NHTSA database. After obtaining satisfactory validation of the performance of the assembled ligamentous cervical spine against available experimental data, 22 cervical muscle pairs, representing the majority of the neck's musculature, were added to the model. Hill's muscle model was utilized to generate muscle forces within the assembled cervical model. The muscle activation level was assumed to be the same for all modeled muscles and the degree of activation was set to correctly predict available human volunteer experimental data from NBDL. The validated model is intended for use as a post processor of dummy measurement within the simulated injury monitor (SIMon) concept being developed by NHTSA where measured kinematics and kinetic data obtained from a dummy during a crash test will serve as the boundary conditions to "drive" the finite element model of the neck. The post-processor will then interrogate the model to determine whether any ligament have exceeded its known failure limit. The model will allow a direct assessment of potential injury, its degree and location thus eliminating the need for global correlates such as Nij.
Keywords
Finite element model; 50th percentile male cervical spine; Hill′s muscle model; Muscle activation;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By Web Of Science : 10  (Related Records In Web of Science)
연도 인용수 순위
1 Bandak, F. A. (1996). Biomechanics of impact traumatic brain injury. Proceedings of the NATO-ASI on Crashworthiness of Transportation Systems: Structural Impact and Occupant Protection, Troia, Portugal, 213-253
2 Chancey, V. C., Van Ee, C. A. Nightingale, R. W., Camacho, D. L. and Myers, B. S. (2000). Understanding and minimizing error in cervical spine tensile testing. In NHTSA ed. Injury Biomechanics Research: 28th Internationat Workshop, San Antonio, U.S.A.
3 Lee, S. K. (2000). Current trend of crash and safety regulations. J. KSAE 22, 2, 20-26
4 Moroney, S. P, Schultz, A. B., Miller, J. A. A. and Andersson, G. B. J. (1998). Load-displacement properties of lower cervical spine motion segments, journal of Biomechanics 21, 9, 769-779
5 Myers, B. (2002). Personal Communication. Nov. at Jacksonville. U.S.A
6 Nahum, A. M., Smith, R. and Ward, C. C. (1977). Intracranial pressure dynamics during head impact. Proceedings of the 2Jst Stapp Car Crash Conference, New Orleans, Louisiana, U.S.A., SAE Paper No. 770922
7 Jager, M. K. J. de (1996). Mathematical head-neckmodels for acceleration impacts. Ph.D thesis, University of Eindhoven, Nederlands
8 Choi, H. Y, Lee, I. H. and Haug, E. (1999). Advanced finite element modeling of the human body for occupant safety; H-Model for the next millennium. Proceeding of 5th HanPam, Seoul, Korea
9 Panjabi, M. M., Crisco, J. J., Vasavada, A., Oda, T., Cholewicki, J., Nibu, K. and E. Shin (2001). MeCha-nical properties of the human cervical spine as shown by three-dimensional load-displacement curves. SPINE 26, 24, 2692-2700
10 Yoganandan, N., Kumaresan, S. and Pintar, F. A. (2001). Biomechanics of the cervical spine Part 2. Cervical spine soft tissue responses and biomechanical modeling. CUnicat Biomechanics 16, 1-27   DOI   ScienceOn
11 Stone, R. J. and J. A. Stone (2000). AtIas of Skeletal Musctes. 3rd Edition. McGraw-Hill. New York
12 Van der Horst, M. J. (1997). The influence of muscle activity on head-neck response during impact. Proceed-ings of the 41st STAPP Car Crash Conference, Lake Buena Vista, Flohda. U.S.A., SAE Paper No. 973346
13 Wismans, J., Oorschot, H. van and Woltring, H. J. (1986). Omni-directional human head-neck response, Proceedings of the 30th STAPP Car Crash Conference, San Diego, California, U.S.A., SAE Paper No. 861893
14 ESI (2002). PAM-CRASH SAFE V2002 Solver NotesManuat. ESI Software
15 Myers, B. (2003). Personal Communication. March at Washinton D.C.. U.S.A
16 Robbin, D. H. (1983). Anthropometry of motor vehicle occupants. Vol. 2 Mid-sized male. UMTRI report., U.S.A
17 Wittek, A., Ono, K., Kajzer, J., Ortengren, R. and Inami,S. (2001). Analysis and comparison of reflex times and electromyograms of cervical muscles under impact loading using surface and fine-wire electrodes. IEEE Trans. on Biomedicat Ene. 48, 143-153   DOI   ScienceOn
18 Claessens, M., Sauren, P. and Wismans J. (1997).Modeling of the human head under impact conditions: A parametric study. SAE Paper No. 973348
19 Ono, Koshiro (1999). Relationship between localized spine deformation and cervical vertebral motions for low speed rear impacts using human volunteers. IRCOBI Conference, Spain, 149-164
20 Williams & Warwick, (1980). GRAY's Anatomy, 36th British Edition, W. B. Saunders Company
21 Pintar, F. A. (2003). Personal communication at 18th ESV Conference. Nagoya, Japan
22 Edwards, W. T. (1999). Mechanical properties of cervical spine tissues. ISR Report, Syracuse University, U.S.A
23 Szabo, T. J. and Walcher, J. B. (1996). Human subject kinematics and electromyographic activity during low speed rear impacts. Albuquerque, Proceedings of the 40th STAPP Car Crash Conference, New Mexico, U.S.A., SAE Paper No. 962432
24 White, III A. A. and Panjabi, M. M. (1990). Ctinicat Biomechanics of the Spine. J. B. LIPPINCOTT COMPANY, 2nd Edition, New York
25 WilHnger, R., Kang, H. S. and Diaw, B. (1999). Three-dimensional human finite-element model validation against two experimental impacts. Annals of Biomedicat Eng. 27,403-410   DOI   ScienceOn
26 Lee, I. H., Yoon, S. B., Lee, J. H. and Choi, H. Y. (2003). Development of finite element human models for crashworthiness simulation: Part 1-50% male model. KSAE Fatt Conference Proc., Busan, Korea
27 Pintar, F. A. (1986). The biomechanics of spinal elements. Ph.D Thesis, Marquette University, U.S.A
28 Voo, L., Kumaresan, S., Pintar, F. A., Yoganandan, N. and Sances, Jr. A. (1996). Finite-element models of the human head. Medicat & Biotoeicat Eng. & Computing 34,5,375-381
29 Bandak, F. A., and Eppinger, R. H. (1994). A three-dimensional finite element analysis of the human brain under combined rotational and translational accelerations. Intemal report. Nationat Highway traffic Safety Admini-straion, U.S.A
30 Chazal, J. A., Tanguy, M. Bourges, G. Gaurel, G. Escande, M. Guillot and G. Vanneuville (1985). Biomechamcal properties of spinal ligaments and a histological study of the supraspinal ligament in traction. Journal of Biomechanics 18, 3, 167-176   DOI   ScienceOn
31 Nightinglale, R. (2003). Personal Communication. Marchat Washington D.C., U.S.A
32 Ono, K., Kaneoka, K., Hattori, S., Ujihashi, S., Takhounts, G. E., Haffner, M. and Eppinger, H. R. (2002). Cervical vertebral motions and biomechanical responses to direct loading of human head. IRCOBI Conference, Munich, Germany, 235-248
33 Thunnissen, J., Wismans, J., Ewing, C. L. and Thomas, D. J. (1995). Human volunteer head-neck response infrontal felxion: A new analysis, Proceedings of the 39th STAPP Car Crash Conference, San Diego, California, U.S.A., SAE Paper No. 952721
34 Nightingale, R., Chancey, V., Luck, J., Tran, L., Ottaviano, D. and B. Myers, (2002). Accounting for Frame and Fixation Compliance in Cervical Spine Tensile Testing, In NHTSA ed. Injury Biomechanics Research: 30th International Workshop, Jacksonville, Florida, U.S.A