• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.39-49
• /
• 2021

The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force's de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1998년도 학술발표회 논문집
• /
• pp.3-3
• /
• 1998

In this pressentation it is argued that the heterogeneity of a hydrologic attribute which may seem to be nonstationary at one scale, may become stationary at a larger scale. The fundamental reason for transformation from nonstationarity to stationarity whith the increase in scale is the phenomenon of coarse-graining of the hydrologic processes with increasing scale. Due to the phenomenon of aliasing, a particular scale hydrologic process heterogeneity which is observed as a nonstationary process at that scale, may be observed as a stationary process at a higher(larger) scale whose size is bigger than the stationary extent of the lower scale heterogeneity. As one goes through a hierarchical sequence of larger and larger scales for observations, one would eliminate nonstationarities which emerge at some lower scales at the expense of losing information on the high frequency fluctuations of the lower scale heterogeneities which will no longer be observed at the larger sampling scales. We call this phenimenon as the "coarse-graining in hydrologic observations". In this presentation, it is also argued that by the coarse-graining of hydrologic processes due to the averaging and aliasing operations at increasing scales, the conservation laws corresponging to these scales may still be quite parsimonious, and need not be more complicated as the scales get larger. It is shown that shen a higher(larger) scale process is formed by averaging a lower(smaller) scale process in time or space, the high frequency components of the lower scale process will be eliminated by the averaging operation. Thereby, the resuliiting average hydrologic dynamics, free from the effects of the high frequency components of the lower scale process, can still be quite simple in form. This is demonstrated by means of some recent upscaling work on the solute teansport conservation equation for hetergeneous aquifers. By means of this solute transport example, it is also shown that for the ensemble average form of a hydrologic conservation equation to be equivalent to its volume-average form at any scale, the parameter functions of that conservation equation at the immediately lower scale must be ergodic.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.223-231
• /
• 2022

금속 적층제조 공정 중 발생할 수 있는 잔류응력은 3D 프린팅을 통한 정밀한 금속 부품 제작을 위해 적절히 통제되어야 하는 중요한 요소이다. 따라서 본 연구에서는 이러한 잔류응력에 영향을 끼치는 요인에 대하여 실험적인 방법을 이용하여 고찰하였다. 실험을 위해 적층제조 공정을 통해 시편을 제작하고 이를 절단하여 변형량 측정을 수행하였으며, 측정된 데이터를 curve fitting 등의 방법을 이용하여 적절히 보정함으로써 공정 파라미터 및 금속 분말 재사용 여부가 금속 적층제조 공정에서 발생한 잔류응력으로 인한 변형에 끼치는 영향을 정량적으로 분석할 수 있는 자료를 확보하였다. 이 결과로부터 금속 적층제조 공정에서 잔류응력으로 인한 변형의 크기에 가장 큰 영향을 끼치는 요소는 금속 분말 재사용 여부임을 확인하였다. 또한 레이저의 패턴, 적층 회전 각도와 같은 공정 파라미터도 변형 크기에 영향을 줄 수 있는 것을 확인하였다.

• 보건행정학회지
• /
• 제27권4호
• /
• pp.336-346
• /
• 2017

Background: Due to the asymmetry of information and knowledge and the power of bureaucrats and medical professionals, it is not easy for citizens to participate in health care policy making. This study analyzes the case of the insured organization participating in the Health Insurance Policy Committee (HIPC) and provides a basis for discussing methods and conditions for better public participation. Methods: Qualitative analysis was conducted using the in-depth interviews with the participants and document data such as materials for HIPC meetings. Semi-structured interviews were conducted with purposively sampled six participants from organizations representing the insured in HIPC. The meanings related to the factors affecting participation were found and categorized into major categories. Results: The main factors affecting participating in the decision making process were trust and cooperation among the participants, structure and procedure of governance, representation and expertise of participants, and contents of issues. Due to limited cooperation, participants lacked influence in important decisions. There was an imbalance in power due to unreasonable procedures and criteria for governance. As the materials for meetings were provided inappropriate manner, it was difficult for participants to understand the contents and comments on the meeting. Due to weak accountability structure, opinions from external stakeholders have not been well received. The participation was made depending on the expertise of individual members. The degree of influence was different depending on the contents of the issues. Conclusion: In order to meet the values of democracy and realize the participation that the insured can demonstrate influence, it is necessary to have a fair and reasonable procedure and a sufficient learning environment. More deliberative structure which reflects citizen's public perspective is required, rather than current negotiating structure of HIPC.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.539-549
• /
• 2017

In water treatment process using microfiltration membranes, manganese is a substance that causes inorganic membrane fouling. As a result of analysis on the operation data taken from I WTP(Water Treatment Plant), it was confirmed that the increase of TMP was very severe during the period of manganese inflow. The membrane fouling fastened the increase of TMP and shortened the service time of filtration or the cleaning cycle. The TMP of the membrane increased to the maximum of $2.13kgf/cm^2$, but it was recovered to the initial level ($0.17kgf/cm^2$) by the 1st acid cleaning step. It was obvious that the main membrane fouling contaminants are due to inorganic substances. As a result of the analysis on the chemical waste, the concentrations of aluminum(146-164 mg/L) and manganese(110-126 mg/L) were very high. It is considered that aluminum was due to the residual unreacted during coagulation step as a pretreatment process. And manganese is thought to be due to the adsorption on the membrane surface as an adsorbate in feed water component during filtration step. For the efficient maintenance of the membrane filtration facilities, optimization of chemical concentration and CIP conditions is very important when finding the abnormal level of influent including foulants such as manganese.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.305-307
• /
• 2014

Pyroprocessing (or pyrometallurgy) is the way of extracting from materials subjected to high temperatures. Generally, this process has a high energy consumption because of mass production and heating-up. To attain effective and efficient energy management, energetic analysis using 0-dimensional model is usually conducted. However, this model can lead to a misunderstanding about energy evaluation due to many assumptions and limitations. In this study, heat & mass balance using 0-dimensional model was reviewed to systematize problems and considerations in general process energy evaluation.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.1.2-1.2
• /
• 2011

Electrohydrodynamics is a good approach to produce uniform-sized colloids and fibers in a continuous process. The dimension can be controlled from tens of nanometers to a few micrometers. The structure of the colloids and nanofibers from electrohydrodynamics has been diversified according to the uses. Especially, core-shell structure and hybridization with functional nanomaterials are fascinating due to their possible uses in drug-delivery systems, multifunctional scaffolds, organic/inorganic hybrids with new functions, and highly sensitive gas- or bio-sensors. This talk will present the structural variations in the colloids and fibers by simply employing phase separation during electrohydrodynamic process and demonstrate their possible applications.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.173-178
• /
• 2001

The cost on transmission and election of precast concrete members largely depends on the weight of them. In this study, the weight of prestressed precast beam could be reduced by control the section and prestressing force to meet the required strength on the basis of the optimum process. The top and bottom concrete stress of the section considered is required to check according to each construction step for this process. The original rectangular beam weight could be reduced up to 50~39% due to the development of a U-beams from the optimum process.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.77-79
• /
• 2006

While RSW(Resistance Spot Welding) have been the most successful sheet metal joining process in automotive industry, there are certain qualify issues due to the control system and its application process. Recent materials and coatings make the process more complicated resulting in new challenges for quality welds. In this research, an intelligent RSW system with adaptive control algorithm is introduced to overcome typical RSW issues and its applications to automotive body assembly are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.337-342
• /
• 1989

The control of a pH value in radwaste treatment process is difficult due to the nonlinearity of the titration curve and its strong sensivity to disturbances. This paper describes an adaptive control strategy which is model-based and allows for direct use of available measurements. This algorithm forces the nonlinear process to follow a desired linear system trajectory, and were applied to the control of a simulated pilot-scale pH process. The simulation study showed that it has the potential advantage over the transformation methods that control effort saturation can be accomodated readily.