Acknowledgement
본 연구는 국토교통부/국토교통과학기술진흥원의 지원을 받아 수행된 '회전익항공기 국제협정을 위한 인증체계 개발 및 인프라 구축(21CHTR-C128889-05)'의 연구 성과이며, 지원에 감사드립니다.
References
- Dilberoglu, U. M., Gharehpapagh, B., Yaman, U. and Dolen, M., "The Role of Additive Manufacturing in the Era of Industry 4.0," Procedia Manufacturing, Vol. 11, 2017, pp. 545~554. https://doi.org/10.1016/j.promfg.2017.07.148
- An, Y. S., "Structural characteristics and development direction of the domestic aircraft parts industry," The Journal of Aerospace Industry, 1995, pp. 29~55.
- Wagner, S. M. and Walton, R. O., "Additive manufacturing's impact and future in the aviation industry," Production Panning & Control, Vol. 27, No. 13, 2016, pp. 1124~1130. https://doi.org/10.1080/09537287.2016.1199824
- Najmon, J. C., Raeisi, S. and Tovar, A., "Review of additive manufacturing technologies and applications in the aerospace industry," Additive Manufacturing for the aerospace industry, 2019, pp. 7~31.
- Li, C., Liu, Z. Y., Fang, X. Y. and Guo, Y. B., "Residual stress in metal additive manufacturing," Procedia Cirp, Vol. 71, 2018, pp. 348~353. https://doi.org/10.1016/j.procir.2018.05.039
- Chen, Q., Liu, J., Liang, X. and To, A. C., "A level-set based continuous scanning path optimization method for reducing residual stress and deformation in metal additive manufacturing," Computer Methods in Applied Mechanics and Engineering, Vol. 360, 2020, 112719. https://doi.org/10.1016/j.cma.2019.112719
- Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F. and King, W. E., "An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel," Metallurgical and Materials Transactions A, Vol. 45, No. 13, 2014, pp. 6260~6270. https://doi.org/10.1007/s11661-014-2549-x
- Baumers, M. and Hlweg, M., "On the economics of additive manufacturing: Experimental findings," Journal of Operations Management, Vol. 65, No. 8, 2019, pp. 794~809. https://doi.org/10.1002/joom.1053
- Prashanth, K. G., Scudino, S., Maity, T., Das, J. and Eckert, J., "Is the energy density a reliable parameter for materials synthesis by selective laser melting?," Materials Research Letters, Vol. 5, No. 6, 2017, pp. 386~390. https://doi.org/10.1080/21663831.2017.1299808
- Jung, H. Y., Choi, S. J., Prashanth, K. G., Stoica, M., Scudino, S., Yi, S., Kuhn, U., Kim, D. H., Kim, K. B. and Eckert, J., "Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study," Materials & Design, Vol. 86, 2015, pp. 703~708. https://doi.org/10.1016/j.matdes.2015.07.145
- Tan, C., Zhou, K., Ma, W., Attard, B., Zhang, P. and Kuang, T., "Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties," Science and Technology of advanced MaTerialS, Vol. 19, No. 1, 2018, pp. 370~380. https://doi.org/10.1080/14686996.2018.1455154
- Cordova, L., Campos, M. and Tinga, T., "Revealing the effects of powder reuse for selective laser melting by powder characterization," Jom, Vol. 71, No. 3, 2019, pp. 1062~1072. https://doi.org/10.1007/s11837-018-3305-2
- Ghods, S., Schultz, E., Wisdom, C., Schur, R., Pahuja, R., Montelione, A., Aroal, D. and Ramulu, M., "Electron beam additive manufacturing of Ti6Al4V: Evolution of powder morphology and part microstructure with powder reuse," Materialia, Vol. 9, 2020, 100631. https://doi.org/10.1016/j.mtla.2020.100631
- Santecchia, E., Spigarelli, S. and Cabibbo, M., "Material reuse in laser powder bed fusion: Side effects of the laser-metal powder interaction," Metals, Vol. 10, No. 3, 2020, p. 341. https://doi.org/10.3390/met10030341
- Bolzoni, L., Herraiz, E., Ruiz-Navas, E. M. and Gordo, E., "Study of the properties of low-cost powder metallurgy titanium alloys by 430 stainless steel addition," Materials & Design, Vol. 60, 2014, pp. 628~636. https://doi.org/10.1016/j.matdes.2014.04.019
- Akino, K. and Kakehi, K., "Strengths and microstructure of SUS316L fabricated by selective laser melting," Materials transactions, Vol. 59, No. 3, 2018, pp. 482~487. https://doi.org/10.2320/matertrans.M2017163
- Yusuf, S. M. and Gao, N., "Influence of energy density on matallurgy and properties in metal additvie manufacturing," Materials Science and Technology, Vol. 33, No. 11, 2017, pp. 1269~1289. https://doi.org/10.1080/02670836.2017.1289444
- Bertoli, U. S., Wolfer, A. J., Matthews, M. J., Delplanque, J. P. R. and Schoenung, J. M., "On the limitations of volumetric energy density as a design parameter for selective laser melting," Materials & Design, Vol. 113, 2017, pp. 331~340. https://doi.org/10.1016/j.matdes.2016.10.037
- Fan, K. C., Fei, Y. T., Yu, X. F., Chen, Y. J., Wang, W. L., Chen, F. and Liu, Y. S., "Development of a low cost micro-CMM for 3D micro/nano measurements," Measurement Science and Technology, Vol. 17, No. 3, 2006, p. 524. https://doi.org/10.1088/0957-0233/17/3/S12
- Yilmazkaya, E. and Ozcelik, Y., "The effects of operational parameters on a mono-wire cutting system: efficiency in marble processing," Rock Mechanics and Rock Engineering, Vol. 49, No. 2, 2016, pp. 523~539. https://doi.org/10.1007/s00603-015-0743-9
- Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y. and Wang, J., "Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting," Jom, Vol. 67, No. 3, 2015, pp. 555~563. https://doi.org/10.1007/s11837-015-1300-4
- Ardila, L. C., Garciandia, F., Gonzalez-Diaz, J. B., Albarez, P., Echeverria, A., Petite, M. M., Deffley, R. and Ochoa, J., "Effect of IN718 recycled powder reuse on properties of parts manufactured by means of selective laser melting," Physics Procedia, Vol. 56, 2014, pp. 99~107. https://doi.org/10.1016/j.phpro.2014.08.152