• 제목/요약/키워드: Dual-wideband

검색결과 77건 처리시간 0.025초

ISM 2.45GHz/5.8GHz 이중대역 특성을 위한 십자형 평판 모노폴 안테나의 구조 변경 (Structural Modification of Crossed Planar Monopole Antenna for ISM 2.45GHz/5.8GHz Dual Band Characteristics)

  • 심재륜;전중창
    • 한국정보통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.13-18
    • /
    • 2015
  • 본 연구는 특정 안테나의 구조 변경을 통해 원하는 주파수 대역에서 이중대역 특성이 가능하도록 하는 안테나 구조 설계에 관한 연구이다. 대상 안테나는 광대역 특성을 가지는 십자형 평판 모노폴 안테나이고, 목표 주파수 대역은 ISM 2.45GHz/5.8GHz 이다. 이를 위해 몸체 안테나인 십자형 평판 모노폴 안테나에 추가적인 안테나 소자를 부가한 후 안테나의 길이와 모양을 임의대로 변경하기 위한 조정변수를 설정하여 목표 값에 접근하도록 다양한 시뮬레이션을 실시하였다. 시뮬레이션 결과 ISM 2.45GHz/5.8GHz에서 기준 이상의 대역폭과 이득을 얻을 수 있었다. 본 연구에서 시도한 안테나 구조 변경을 위한 조정변수의 도입은 이중대역(다중대역) 특성을 가지는 안테나 개발시 하나의 유용한 사례가 될 수 있다.

상호 결합이 적은 두 개의 공진점을 갖는 광대역 전기 음향 변화기를 위한 역률 개선 회로 설계 방법 연구 (A Systematic Power Factor Improvement Method for an Electro Acoustic Transducer with Low Coupled Dual Resonances)

  • 임준석;편용국
    • 한국음향학회지
    • /
    • 제31권7호
    • /
    • pp.480-486
    • /
    • 2012
  • 음향 변환기용 외부 회로를 구성할 때, 파워 앰프의 내부저항이 매우 작은 경우 정합 회로를 구성하기 보다는 부하측의 역률을 개선하는 것을 선호 한다. 기존 연구의 결과를 살펴 보면 광대역에서 최대 파워를 전달하게 하는 정합회로를 구하는 방법을 많이 연구되어 왔으나, 두 개의 공진점을 갖는 광대역 전기 음향 변화기에 적용할 만한 광대역 역률 개선용 튜닝 회로를 구성하는 방법은 논문화된 결과는 드물다. 본 논문에서는 기존의 정합회로 설계에서 사용하는 체비세프 설계법을 기본으로 하여, 좀 더 낫은 결과를 가질 수 있도록 하는 복합 최적화 과정을 제안한다.

Small Internal Antenna Using Multiband, Wideband, and High-Isolation MIMO Techniques

  • Kim, Sang-Hyeong;Jin, Zhe-Jun;Chae, Yoon-Byung;Yun, Tae-Yeoul
    • ETRI Journal
    • /
    • 제35권1호
    • /
    • pp.51-57
    • /
    • 2013
  • In this paper, a small internal antenna for a mobile handset is presented using multiband, wideband, and high-isolation multiple-input multiple-output techniques. The proposed antenna consists of three planar inverted-F antennas (PIFAs) that operate in the global system for mobile communication (GSM900), the digital communication system (DCS), the personal communication system (PCS), the universal mobile telecommunication system (UMTS), and wireless local area network (WLAN) bands with a physical size of $40mm{\times}10mm{\times}10mm$. A resonator attached to the folded PIFA creates dual resonances, achieving a wide bandwidth of approximately 460 MHz, covering the DCS, PCS, and UMTS bands; a meander shorting line is used to improve impedance matching. Additionally, a modified neutralization link is embedded between diversity antennas to enhance isolation, which results in a 6-dB improvement in the isolation and less than 0.1 in the envelope correlation coefficient evaluated from the far-field radiation patterns. Simulation and measurements demonstrate very similar results for S-parameters and radiation patterns. Peak gains show 3.73 dBi, 3.77 dBi, 3.28 dBi, 2.15 dBi, and 5.86 dBi, and antenna efficiencies show 56.15%, 72.15%, 68.59%, 52.92%, and 82.93% for GSM900, DCS, PCS, UMTS, and WLAN bands, respectively.

상호 결합이 적은 두 개의 공진점을 갖는 수중용 광대역 전기 음향 변화기를 위한 역률 개선 회로 설계 및 실험 (The Design and Experiment of Power Factor Improvement Circuit for a Underwater Electro Acoustic Transducer with Low Coupled Dual Resonances)

  • 임준석;편용국
    • 한국통신학회논문지
    • /
    • 제38B권12호
    • /
    • pp.967-975
    • /
    • 2013
  • 수중용 전기 음향 변환기용 외부 회로를 구성할 때, 파워 앰프의 내부저항이 매우 작은 경우 정합 회로를 구성하기 보다는 부하측의 역률을 개선하는 것을 선호 한다. 기존 연구의 결과를 살펴보면 광대역에서 최대 파워를 전달하게 하는 정합회로를 구하는 방법을 많이 연구되어 왔으나, 두 개의 공진점을 갖는 수중용 광대역 전기 음향 변화기에 적용할 만한 광대역 역률 개선 튜닝 회로를 구성하는 방법은 논문화된 결과는 드물다. 본 논문에서는 기존의 정합회로 설계에서 사용하는 체비세프 설계법을 기본으로 하여, 좀 더 낫은 결과를 가질 수 있도록 하는 복합 최적화 과정을 바탕으로 역률 개선 회로를 설계하고 이를 실험을 통하여 역율 개선을 확인한다.

광대역 빔 조향을 위한 위상 배열 안테나의 실시간 지연 위상 천이기 구성에 관한 연구 (A Study on Configuration of True Time Delay Phase Shifter for Wideband Beam Steering Phased Array Antenna)

  • 정진우;류지호;박재돈;서종우
    • 한국군사과학기술학회지
    • /
    • 제20권3호
    • /
    • pp.413-420
    • /
    • 2017
  • We investigate the performance of a true time delay(TTD) phase shifter to reduce the beam squint caused by frequency changes of a phased array antenna in wideband communication systems. To design a high gain phased array antenna, we need a long TTD, which causes high RF loss, low resolution and large dimension of TTD phase shifters. To overcome the problems, we propose a schematic of dual TTD phase shifters, which consists of short time delay(STD) in radio frequency(RF) part and long time delay(LTD) in intermediate frequency(IF) part. Our analysis results show that the proposed scheme reduces the required bits and delay time in RF band of the TTD compared to the conventional single TTD scheme.

A dual-path high linear amplifier for carrier aggregation

  • Kang, Dong-Woo;Choi, Jang-Hong
    • ETRI Journal
    • /
    • 제42권5호
    • /
    • pp.773-780
    • /
    • 2020
  • A 40 nm complementary metal oxide semiconductor carrier-aggregated drive amplifier with high linearity is presented for sub-GHz Internet of Things applications. The proposed drive amplifier consists of two high linear amplifiers, which are composed of five differential cascode cells. Carrier aggregation can be achieved by switching on both the driver amplifiers simultaneously and combining the two independent signals in the current mode. The common gate bias of the cascode cells is selected to maximize the output 1 dB compression point (P1dB) to support high-linear wideband applications, and is used for the local supply voltage of digital circuitry for gain control. The proposed circuit achieved an output P1dB of 10.7 dBm with over 22.8 dBm of output 3rd-order intercept point up to 0.9 GHz and demonstrated a 55 dBc adjacent channel leakage ratio (ACLR) for the 802.11af with -5 dBm channel power. To the best of our knowledge, this is the first demonstration of the wideband carrier-aggregated drive amplifier that achieves the highest ACLR performance.

대역저지 특성을 갖는 초광대역 안테나 설계 및 구현 (Design and Implementation of UWB Antenna with Band Rejection Characteristics)

  • 양운근;남태현;유재성;오희운
    • 한국항행학회논문지
    • /
    • 제22권1호
    • /
    • pp.31-36
    • /
    • 2018
  • 본 논문에서는 대역저지 특성을 갖는 초광대역(UWB: ultra wideband) 안테나를 설계 및 구현하였다. 제안된 안테나는 슬롯을 가진 평면 방사 패치와 패치 아래 양쪽과 뒷면 접지면으로 구성되어있다. 평면 방사 패치 내에 있는 슬롯들로써 대역을 저지하며 U-모양의 슬롯은 WLAN(wireless local area network, 5.15~5.825 GHz) 대역을, n-모양의 슬롯은 X-Band(7.25~8.395 GHz) 대역을 저지하는데 각각 기여한다. 그리고 저지 대역을 제외한 UWB(3.10~10.60 GHz) 전체 대역의 전압정재파비(VSWR: voltage standing wave ratio)를 2.0 이하로 만족시키기 위해 평면 방사 패치와 접지면에 변형을 주었다. 제안된 안테나의 설계과정과 전산모의실험에는 Ansoft사의 HFSS(high frequency structure simulator)를 사용하였다. 전산모의실험된 안테나는 3.10~10.60 GHz에서 저지 대역인 5.15~5.94 GHz, 7.02~8.45 GHz를 제외한 구간에서 전압정재파비는 2.0 이하를 만족하며, 구현된 안테나의 측정 결과는 저지 대역인 5.12~5.95 GHz, 7.20~8.58 GHz를 제외한 구간에서 전압정재파비는 2.0 이하를 만족한다.

이중 대역 꼬인 역 F 안테나 (Twisted Inverted F Antenna for Dual-Band Applications)

  • 김재희;조원우;박위상
    • 한국전자파학회논문지
    • /
    • 제19권11호
    • /
    • pp.1240-1247
    • /
    • 2008
  • 본 논문에서는 이중 대역 꼬인 역 F 안테나가 제안되었다. 기존의 역 F 안테나의 방사하는 안테나 부를 한번 꼬아 이중 대역을 구현하고, 기생선을 넣어 높은 주파수에서 추가적인 공진을 일으켰다. 꼬인 구조에 의한 높은 주파수 공진과 기생선의 추가 공진을 가까이 하면 높은 주파수에서 광대역 특성을 얻을 수 있다 안테나는 꼬인 구조의 특성에 의해 그라운드를 제외한 안테나의 전기적 크기가 가로, 세로, 높이가 각각 $0.109{\lambda}{\times}0.025{\lambda}{\times}0.0025{\lambda}$가 되어 기존의 역 F 안테나에 비해 44%의 길이를 갖는다. 안테나는 FR4 기판에 제작되었으며, 960 MHz 대역과 1.8GHz 대역에서 $S_{11}$<-5 dB 기준으로 47 MHz와 289 MHz의 대역폭을 갖는다. 그리고 최대 방사 효율은 각 대역에서 49%와 57%이다.

Ka 대역 VSAT용 이중대역 직교모드변환기 설계 (Design of Dual-band Ortho-mode Transducer for Ka-band VSATs)

  • 이홍열;엄만석;윤소현;염인복;김현수;박정우
    • 한국위성정보통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.47-51
    • /
    • 2013
  • 본 논문에는 Ka 대역 VSAT용 반사판 안테나의 급전부에 사용하기 위한 이중대역 직교모드변환기의 설계와 실험 결과를 보였다. 설계된 직교모드변환기는 20Ghz의 수신대역 주파수 영역과 30GHz의 송신대역 주파수 영역에서 동작하는 두 개의 선형 직교 편파된 신호를 분리하기 위해서 광대역 특성을 갖는다. 또한, 급전 부품의 부피를 작게 하기 위해서 Boifot 접합 기반의 직교모드변환기를 이중 대역을 갖도록 설계를 하였다. 설계 검증을 위한 실험결과 수평편파에 대해서 수신대역과 송신대역의 반사손실은 각각 20dB와 21dB 이상의 특성을 나타냈으며, 수직편파에 대해서는 20dB와 24dB 이상의 특성을 보였다. 수평편파와 수직편파에 대한 격리도 특성은 수신대역과 송신대역에서 각각 43dB와 52dB 이상을 보였다.

교차편파 격리도를 개선한 이중선형 편파 시뉴어스 안테나의 설계 및 제작 (Design and Fabrication of a Dual Linear Polarization Sinuous Antenna with Improved Cross Polarization Isolation)

  • 김지흥;유홍균;채명호;김정훈;박범준;박영주
    • 한국항행학회논문지
    • /
    • 제22권2호
    • /
    • pp.123-132
    • /
    • 2018
  • 본 논문에서는 교차편파 격리도(XPI; cross polarization isolation)를 개선한 이중선형 편파시뉴어스 안테나를 설계 및 제작하였다. 제안된 시뉴어스 안테나는 이중선형 편파 발생을 위해 4개의 암(arm) 방사체로 구성되며, 클로펜스타인 테이퍼(Klopfenstein taper) 구조의 광대역 마이크로스트립 발룬을 통해 급전된다. 또한 후방 반사파 감소를 위해 2단 원통형 캐비티 구조를 적용하였다. 캐비티 내부에는 반사파에 의한 성능 저하를 감소시키기 위해 허니컴 형태의 흡수체를 삽입하였다. 설계된 시뉴어스 안테나는 저대역에서의 교차편파 격리도를 개선하기 위해 최외각 암패턴과 캐비티의 림(rim) 사이에 저항을 적용하였다. 제작된 안테나는 저대역에서 교차편파 격리도가 개선되어 편파 측정을 위한 안테나로 적용 가능함을 확인하였다.