• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.419-426
• /
• 2002

전류원 하프브릿지 듀얼 컨버터(이하 '듀얼 컨버터')를 위한 새로운 능동형 무손실 스너버가 제안된다. 제안된 능동형 무손실 스너버는 주 스위치의 턴 오프 시 변압기 누설 인덕터로 인해 발생되는 스위치 양단 전압 서지를 흡수해줄 뿐만 아니라 주 스위치 및 부가된 보조스위치의 턴 온 시 영전압 스위칭까지 보장해 주기 때문에 스위칭손실을 거의 무시할 수 있으며, 고 효율 및 고속 스위칭에 매우 유리한 장점을 가져 높은 전력밀도를 가진 고성능승압형 컨버터의 구현을 가능하게 한다. 또한 영전압 스위칭을 위해 별도의 인덕터 없이 변압기의 누설 인덕터만으로 그 구현이 가능하며 보조 스위치의 구동신호가 주 스위치와 교대로(complementary) 온 오프 되므로 별도의 PWM IC가 필요 없는 간단한 구조를 가지며, 제작 시 단가 절감 효과를 얻을 수 있다. 본 논문에서는 기존에 제안된 바 있는 듀얼 컨버터에 제안된 능동형 무손실 스너버를 적용하여 그 동작 원리, 영전압스위칭 조건, 그리고 설계방법 등에 대해 살펴보고 최종적으로 제시된 이론적인 분석결과 및 동작의 유효성 검증을 위해 24V/DC 입력에 200V/DC 출력을 갖는 200W급 축소모델을 제작하여 100kHz로 구동한 실험 결과를 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.203-205
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.387-390
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.708-712
• /
• 2001

A new phase-shifted parallel-input/series-output (PI SO) dual inductor-fed push-pull converter for high-power step­up applications is proposed. This converter is operated at a constant duty cycle and employs an auxiliary circuit to control the output voltage with a phase-shift between the two modules. It features a voltage conversion characteristic which is linear to changes in the control input, and high step-up ratio with a greatly reduced switch turn-off stress resulting in a significant increase in the converter efficiency. It also shows a low ripple content and low root-mean-square (RMS) current in the output capacitor. The operational principle is analyzed and a comparative analysis with the conventional pulse-width-modulated (PWM) PISO dual inductor-fed push-pull converter is presented. A 50kHz, 800W, 350Vdc prototype with an input of 20-32Vdc has also been constructed to validate the proposed converter. The proposed converter compares favorably with the conventional counterpart and is considered well suited to high-power step-up applications.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.54-60
• /
• 2008

The atomization characteristics of the dual air supplying twin-fluid nozzle were investigated experimentally using PIV and PDA systems. The two-fluid nozzle is composed of three main parts: the feeding injector to supply fluid that is controlled by a PWM (pulse-width modulation) mode, the adaptor as a device with the ports for supplying the carrier and assist air and the main nozzle to produce the spray. The main nozzle has the swirl tip with four equally spaced tangential slots, which give the injecting fluid an angular momentum. The angle of the swirl tip varied with 0$^{\circ}$ 30$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$, and the ratios of carrier air to assist air and ALR(total air to liquid) were 0.55 and 1.23, respectively. The macroscopic behavior of the spray was investigated using PIV system, and the mean velocity, turbulent intensity and SMD distributions of the sprays were measured using PDA system. As the results, the mean axial velocity at the spray centerline decrease with the increase of the swirl angle. The turbulent intensities of the axial and radial velocity were increased with the increase of the swirl angle. The mean SMD (Sauter mean diameter) of the radial direction along the axial distance shows the lowest value at the swirl angle of 60$^{\circ}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.232-234
• /
• 2002

Due to development of power electronics technology, power conversion system are tend to small size, easy to use and light weight. Especially motor control system have increased concerns and interests about IPM(Intelligent Power Module) inverter, which contains protection circuit, drive circuit and power devices. So, we manufactured 3-phase inverter using DIP-IPM(Dual in-line package IPM) PS21245- E(1.5 Kw) made by MITSUBISHI Electric. Some of these features include -HVIC to Provide level shifting and gate drive for high-side IGBTs. The interface circuit between pwm controller and DIP-IPM can made by direct connection. In order to validate dynamic performance of the proposed system, the actual experiment worked out at wide speed range. The developed system is shown as a good dynamic characteristics.

• ETRI Journal
• /
• 제35권2호
• /
• pp.188-192
• /
• 2013

Previous work proposed combining multipulse pulse position modulation (MPPM) with pulse amplitude modulation to form multipulse amplitude and position modulation (MPAPM), which is a hybrid modulation that results in an improvement in bandwidth efficiency but a degradation in power efficiency. In this paper, to achieve greater power efficiency and a better data rate, we propose multipulse dual amplitude-width modulation, based on MPAPM and pulse width modulation. The proposed scheme shows a remarkable improvement in data rate and a 1.5-dB improvement in power efficiency over MPAPM, while sustaining the bandwidth efficiency. After introducing symbol structure, we present the theoretical expressions of spectral efficiency, the power requirements, and the normalized data rate, as well as the results of comparing the proposed modulation to MPPM and MPAPM.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.227-232
• /
• 2014

A highly efficient MOSFET inverter for single-phase grid-connected photovoltaic power generation systems is presented in this paper. It is a full-MOSFET version of the conventional transformerless full-bridge inverter with dual L-C filters using unipolar PWM. The key idea lies on smart pre switching(SPS), which can make the large switching loss due to a poor reverse recovery of the MOSFET's body diode reduced dramatically. The validity of the proposed inverter is verified by experiment.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.21-26
• /
• 2016

본 논문에서는 휴대 전자기기의 내부 전원단을 위한, CCM/DCM 기능의 이중모드 감압형 DC-DC 벅 컨버터를 제안한다. 제안하는 변환기는 1 MHz의 주파수에서 동작하며, 파워단과 제어블럭으로 이루어진다. 파워단은 Power MOS 트랜지스터, 인덕터, 커패시터, 제어 루프용 피드백 저항으로 구성된다. 제어부는 펄스폭 변조기 (PWM), 오차증폭기, 램프 파 발생기, 오실레이터 등으로 이루진다. 또한 본 논문에서 보상단의 큰 외부 커패시터는, 집적회로의 면적축소를 위하여 CMOS 회로로 구성되는 멀티플라이어 등가 커패시터로 대체하였다. 또한,. 본 논문에서, 보상단의 외부 커패시터는 집적회로의 면적을 줄이기 위하여 곱셈기 기반 CMOS 등가회로로 대체하였다. 또한 제안하는 회로는 칩을 보호하기 위하여 출력 과전압, 입력부족 차단 보호회로 및 과열 차단 보호회로를 내장하였다. 제안하는 회로는 $0.18{\mu}m$ CMOS 공정을 사용하여, 케이던스의 스펙트라 회로설계 프로그램을 이용하여 설계 및 검증을 하였다. SPICE 모의 실험 결과, 설계된 이중모드 DC-DC 벅 변환기는 94.8 %의 피크효율, 3.29 mV의 리플전압, 2.7 ~ 3.3 V의 전압 조건에서 1.8 V의 출력전압을 보였다.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.853-858
• /
• 2020

본 논문은 통신기기에서 유입 되는 RF 노이즈에 대해 내성을 가진 OLED용 2-채널 DC-DC 변환기를 제안한다. RF 신호 내성을 위해, 입력전압 변동만큼 감쇠시키는 입력전압 변동감쇠 회로가 내장된다. 양의 전압 V_POS를 출력하는 부스트 변환기는 SPWM-PWM 듀얼모드로 동작하고, 데드 타임을 제어함으로써 전력 효율을 제고한다. V_NEG를 출력하는 인버팅 차지펌프는 2-상 출력 구조로 VCO를 이용한 PFM으로 동작해 작은 리플을 갖도록 설계된다. 0.18 ㎛ BCDMOS 공정으로 시뮬레이션 한 결과, 부스트 변환기 출력전압의 오버슈트와 언더슈트는 10 mV에서 각각 2 mV, 5 mV로 감소하였다. 또한, 2-채널 DC-DC 변환기의 전력효율은 39%~93%을 가졌고, 데드 타임 제어기를 적용한 부스트 변환기의 효율은 종전보다 최대 3% 증가하였다.