A New Active Lossless Snubber for Half-Bridge Dual Converter

하프 브릿지 듀얼 컨버터를 위한 새로운 능동형 무손실 스너버

  • 한상규 (한국과학기술원 대학원 전자전산학과 전기 및 전자공학) ;
  • 윤현기 (한국과학기술원 대학원 전자전산학과 전기 및 전자공학) ;
  • 문건우 (한국과학기술원 전자전산학과 전기 및 전자공학전공) ;
  • 윤명중 (한국과학기술원 전자전산학과 전기 및 전자공학전공) ;
  • 김윤호 (중앙대 전기공학과)
  • Published : 2002.10.01

Abstract

A new active lossless snubber for half-bridge dual converter(that is called'dual converter') is proposed in this paper It features soft switching(ZVS) as well as turn-off snubbing in both main and auxiliary switches. Therefore, it helps the dual converter to operate at the higher frequency with a higher efficiency and smaller-sized reactive components. Moreover, since it uses parasitic components, such as leakage inductances and switch output capacitances etc, to achieve the ZVS of power switches, it has simpler structure and lower cost of production. The operational principle, theoretical analysis, and design consideration are presented. To confirm the operation, features, and validity of the proposed circuit, experimental results from a 200w, 24V/DC-200V/DC proto-type are presented.

전류원 하프브릿지 듀얼 컨버터(이하 '듀얼 컨버터')를 위한 새로운 능동형 무손실 스너버가 제안된다. 제안된 능동형 무손실 스너버는 주 스위치의 턴 오프 시 변압기 누설 인덕터로 인해 발생되는 스위치 양단 전압 서지를 흡수해줄 뿐만 아니라 주 스위치 및 부가된 보조스위치의 턴 온 시 영전압 스위칭까지 보장해 주기 때문에 스위칭손실을 거의 무시할 수 있으며, 고 효율 및 고속 스위칭에 매우 유리한 장점을 가져 높은 전력밀도를 가진 고성능승압형 컨버터의 구현을 가능하게 한다. 또한 영전압 스위칭을 위해 별도의 인덕터 없이 변압기의 누설 인덕터만으로 그 구현이 가능하며 보조 스위치의 구동신호가 주 스위치와 교대로(complementary) 온 오프 되므로 별도의 PWM IC가 필요 없는 간단한 구조를 가지며, 제작 시 단가 절감 효과를 얻을 수 있다. 본 논문에서는 기존에 제안된 바 있는 듀얼 컨버터에 제안된 능동형 무손실 스너버를 적용하여 그 동작 원리, 영전압스위칭 조건, 그리고 설계방법 등에 대해 살펴보고 최종적으로 제시된 이론적인 분석결과 및 동작의 유효성 검증을 위해 24V/DC 입력에 200V/DC 출력을 갖는 200W급 축소모델을 제작하여 100kHz로 구동한 실험 결과를 제시한다.

Keywords

References

  1. IEEE Trans. on Inductrial Electronics v.40 no.1 A Current-Sourced DC-DC Converter Derived via the Duality Principle from the Half-Bridge Converter Peter J. Wolfs
  2. Switching Mode Power Supply Design Pressman
  3. Nondissipative Turn-Off Snubber Alleviates Switching Power Dissipation, Second-Breakdown Stress and Vce Overshoot: Analysis, Design Procedure and Experimental Verification Moshe Domb;Richard Redl;Nathan O. Sokal
  4. PESC'88 Record, 19th Annual IEEE v.2 Design of a nondissipative turn-off snubber in a forward converter Tanaka, T. Ninomiya;T. Harada
  5. 전력전자학술대회 논문집 새로운 위상전이 병렬입력/직렬출력 모듈화를 적용한 듀얼 컨버터 강정일;노정욱;한상규;윤명중
  6. Transactions of KIPE v.6 no.5 An analysis of phase shifted parallel-input/series-output dual converter for high-power step-up applications J.I. Kang;C.W. Roh;G.W. Moon;M.J. Youn
  7. 전력전자학회 논문지 v.6 no.5 대용량 승압형 병렬입력/직렬출력 듀얼 컨버터의 분석 강정일;노정욱;문건우;윤명중
  8. APEC'98 Improved Soft-Switching ZVT Converters with Active Snubber Ray L. Lin;Yiqing Zhao;F. C. Lee
  9. PESC'98 A Boost PWM Soft-Single-Switched Converter Lucio R. Barbosa(et al.)
  10. PESC'80 Push-Pull Current-fed Multiple Output DC/DC Converter with Only One Inductor and with 0 to 100% Switch Duty Ratio R. Redl;N.O. Sakal