• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.436-442
• /
• 2005

컨버전스시대의 도래에 따라 다양한 유무선통합서비스를 지원하기 위한 embedded WiFi 기술이 모바일 PC, PDA, 핸드폰, TV, PMP, 카메라, 비디오 게임기 및 로봇 장남감에 이르기 까지 다양하게 적용되고 있다. 이에 다양한 단말의 형태를 고려한 무선구간의 성능확보가 요구되고 있는 실정으로 본 논문에서는 DBDM (Dual Band Dual Mode) 단말인 NESPOT Swing 단말을 근간으로 안테나 위치 최적화에 대한 기술과 단말 RF 및 기지국 안테나의 특성을 고려한 필드 성능 측정 방법에 대하여 기술하고, 이론적 분석과 실측정치를 제시하고자 한다. 본 연구의 결과는 앞으로 다양한 환경에서 사용이 예상되는 WiFi 기지국의 설치 및 embedded WiFi 단말의 안테나 구성과 RE모듈 성능 확보에 활용될 수 있을 것으로 기대된다.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

At present wireless internet access service is available through the 3G network, mobile WiMAX and WiFi anytime and anywhere. In this environment where there are various networks, users should be able to select specific networks depending on different situations. And it is necessary to provide mobility support between homogeneous and between heterogenous networks. Given this situation, the many proposals have been presented to link 3G, which has the largest service area among various networks, with mobile WiMAX(IEEE 802.16e), or with WiFi(IEEE 802.11). But, recently, with the increasing volume of wireless internet use and wireless internet data, due to the advents of net-book, e-book and smart phone, the service area of WiFi and mobile WiMAX has rapidly expanded. Especially, the availability of real-time application such as internet phone has led to the relative shrinking of the proportion of 3G mobile communication network giving conventional voice service, and enlargement of those of wireless internet access networks like WiFi and mobile WiMAX. This paper suggests a handover scheme based on PMIPv6, whitch support mobility between WiFi and mobile WiMAX, and minimizes handover delay. In this scheme, the mobile node has a dual stack structure composed of two interfaces-WiFi and mobile WiMAX. Since WiFi dose not support mobility, it is suggested that the mobile node have the capacity to deal with handover signaling between gateway in case of handover between homogeneous networks. This handover scheme, suggested comparing with current handovers between homogeneous networks, has proved, in its analytic evaluation, to be able to reduce handover, transmission, and signaling overhead.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.2
• /
• pp.417-429
• /
• 2019

WPA2-PSK uses a 4-way handshake protocol based on a shared secret to establish a secure session between a client and an AP. It has various security problems such as eavesdropping attacks and the secure session establishment process is inefficient because it requires multiple interactions between client and AP. The WPA3 standard has recently been proposed to solve the security problem of WPA2, but it is a small improvement using the same 4-way handshake methodology. OAuth 2.0 token authentication is widely used on the web, which can be used to keep an authenticated state of a client for a long time by using tokens issued to an authenticated client. In this paper, we apply the dual-token based randomized token authentication technology to the Wi-Fi security protocol to achieve an efficient Wi-Fi security protocol by dividing initial authentication and secure session establishment. Once a client is authenticated and equipped with dual tokens issued by AP, it can establish secure session using them quickly with one message exchange over a non-secure channel.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.71-77
• /
• 2023

In this paper, a dual-band stopband frequency selective surface that can be applied to Wi-Fi 6E systems is designed to block external interfering signals with adjacent operating frequency spectrum in indoor wireless LAN environments. The proposed frequency selective surface structure has frequency blocking characteristics in the 2.4GHz and 6GHz bands, and is realized through a modified crossed dipole structure and an interlocking puzzle form between unit structures. The proposed structure is designed to have stable frequency response characteristics with respect to incident angle and polarization, and the experimental results show good agreement with the simulation results for incident waves from 0° to 45°.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1338-1343
• /
• 2018

MIMO(Multiple Input Multiple Output) slot antenna that operates on the dual WiFi band(2.401~2.495GHz, 5.18~5.825GHz), in this paper, was studied. The basic theory for the slot design is based on the coupling between adjacent slot, and slots are fed by the each microstrip lines. Two slot antennas for the MIMO operation are located on the left and the right side of top of the metal notebook, and grounds between a notebook and two microstrip feeding lines are connected. Measurement of return loss showed under -6dB on entire design band, and isolation was below than -30dB. Radiation efficiency, average gain and peak gain for the left and the right slot were measured in the anechoic chamber, and showed good performances as 57.25%, -2.42dBi, 5.64dBi and 55.35%, -2.61dBi, 6.42dBi for the 2.4GHz band and 55.89%, -2.58dBi, 7.3dBi and 53.79%, -2.8dBi, 7.54dBi for the 5GHz band.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.665-669
• /
• 2018

In this paper, we design an antenna for LTE / Wi-Fi communication that operates in 2.65 GHz and 5 GHz band for small-sized broadband communication antenna that can be used in the sea. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. In addition, we designed a microstrip antenna using CST Microwave Studio 2014 program that can design 3D. Simulation results show that the reflection lossis -12.712 dB at 2.65 GHz and -16.583 dB at 5 GHz. The gain was 1.738 dBi at 2.65 GHz and 3.284 dBi at 5 GHz. In this paper, we propose a dual-band antenna for LTE / Wi-Fi, which can be used in maritime environments, which is worse than terrestrial communication, because of differences in communication speed and communication stability compared with those used on land.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.17-23
• /
• 2021

In the present study, a more compact dual-band slot antenna is newly proposed for Wi-Fi application. The proposed antenna is composed of rectangular two stepped slot with open end which can generate standing wave resonance at dual frequency bands and L-type microstrip feed line. The measured impedance bandwidths are 50 MHz(2.412 ~ 2.470 GHz) at low frequency band and 452 MHz(5.451 ~ 5.903 GHz) at high frequency band respectiviely. Furthermore its size of 14 × 21 mm² is reduced by 30% compared to the size of 20 × 21 mm² of a conventional similar compact slot antenna. It has the omni-directional radiation pattern characteristics of a typical dipole antenna on the H-Plane, so it is suitable for commercial wireless network applications such as Wi-Fi.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.449-452
• /
• 2018

In this paper, we design a Wibro / WiFi dual band microstrip antenna for wireless broadband communication. The proposed antenna is designed to have the characteristics of FR-4 (er = 4.3), size of $40[mm]{\times}40[mm]$, and usable in 2.31[GHz] and 5.8[GHz] bands of Wibro / WiFi. The simulation is performed by CST Microwave Studio 2014 The simulation result shows that the gain is 2.308[dB] at 2.31[GHz] and 2.985[dB] at 5.8[GHz]. S-parameters were also found to be less than -10[dB] (WSWR2: 1) in the desired frequency band, and a small number of parameters and a compact antenna were designed. It is expected that many users will use the mobile communication antenna for accurate and fast communication for smooth wireless broadband communication.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.41-47
• /
• 2013

This letter describes a dual-band compact monopole antenna with two branches for Wi-Fi applications. The proposed antenna is based on a planar monopole design, and composed of two branches of radiating patches for dual-band operation. The ground size of the antenna matches the ground size of a typical hand-held cellular phone for improved compatibility with mobile phone printed circuit boards. The antenna is designed using a simulator and fabricated with optimized parameters. The fabricated antenna is measured at the lower and higher operating frequencies, and the return loss coefficient, gain, and radiation patterns are determined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.958-966
• /
• 2012

This paper presents a compact bluetooth/WiFi dual-mode dual-band RF front-end module(FEM) is realized by low temperature co-fired ceramic(LTCC) technology. The proposed RF front-end module consists of a diplexer, baluns in the LTCC substrate, and an SPDT switch, an SP3T switch on the LTCC substrate. In order to reduce the module size and increase integration level, the proposed diplexer and balun are designed using LC lumped elements. The parasitic elements caused by coupling effect between metal pattern layers and ground plane layer are considered during the design. The fabricated dual-mode RF front-end module has 13 pattern layers including three inner ground layers and it occupies less than $3.0mm{\times}3.7mm{\times}0.66mm$.