• Transactions on Electrical and Electronic Materials
• /
• v.11 no.5
• /
• pp.202-205
• /
• 2010

In this study, the etch properties of $Al_2O_3$ thin films deposited by atomic layer deposition were investigated as a function of the $O_2$ content in $BCl_3$/Ar inductively coupled plasma. The experiments were performed by comparing the etch rates and selectivity of $Al_2O_3$ over the hard mask materials as functions of the input plasma parameters, such as the gas mixing ratio, DC-bias voltage, ratio-frequency (RF) power and process pressure. The highest obtained etch rate was 477 nm/min at an RF power of 700 W, $O_2$ to $BCl_3$/Ar gas ratio of 15%, DC-bias voltage of -100 V and process pressure of 15 mTorr. The deposition occurred on the surfaces when the amount of $O_2$ added to the $BCl_3$/Ar gas was too high at a low DC-bias voltage or high process pressure. X-ray photoelectron spectroscopy was used to investigate the chemical reactions on the etched surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.382-382
• /
• 2010

The etch characteristics of the $HfAlO_3$ thin films and selectivity of $HfAlO_3$ to $SiO_2$ in $Cl_2/BCl_3$/Ar plasma were investigated in this work. The maximum etch rate was 108.7 nm/min and selectivity of $HfAlO_3$ to $SiO_2$ was 1.11 at $Cl_2$(3sccm)/$BCl_3$(4sccm)/Ar(16sccm), RF power of 500 W, DC-bias voltage of - 100 V, process pressure of 1 Pa and substrate temperature of $40^{\circ}C$. As increasing RF power and DC-bias voltage, etch rates of the $HfAlO_3$ thin films increased. Whereas as decreasing of the process pressure, those of the $HfAlO_3$ thin films were increased. The chemical reaction on the surface of the etched the $HfAlO_3$ thin films was investigated with X-ray photoelectron spectroscopy (XPS).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1067-1071
• /
• 1997

A new type of gripper for micrometer-size objects is developed using piezoelectric multi-layer benders. It is composed of three chopsticks, two of which are designed to grip micro-objects. The third one is reserved for helping the two when objects are released from the chopsticks. It is well known that a micro object is much easier to grasp than to release it after holding it. The electrostatic force between the chopsticks and an object is believed to be the main cause of adhesion in a dry environment. The surface tension becomes very important when liquids are present or in a liquid. The third auxiliary chopsticks is introduced to solve there surface effects. All the three chopsticks are made of tungsten wires with sharpened ends by etching. When grasping microparts, the two chopsticks are utilized, and, when releasing them anywhere the parts are located, the third one reduces the electrostatic force between the objects and the chopstick may be to help the other two chopsticks to hold an objects in a desired orientation. We constructed the three chopstick gripoer for micro objects and test their function by holding and releasing an object of a diameter of 100 micrometers. We make use of open loop voltage control. The bender displacement resolution is sub-micrometer. The gripping forces, about tens of mN are obtained. The experiment shows that the third auxiliary chopstick functions effectively.

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.275-278
• /
• 2020

In this study, we evaluated the temperature-dependent characteristics of homojunction InGaAs vertical Fin-shaped Tunnel Field-Effect Transistors (Fin TFETs), which were fabricated using a novel nano-fin patterning technique in which the Au electroplating and the high-temperature InGaAs dry-etching processes were combined. The fabricated homojunction InGaAs vertical Fin TFETs, with a fin width and gate length of 60 nm and 100 nm, respectively, exhibited excellent device characteristics, such as a minimum subthreshold swing of 80 mV/decade for drain voltage (V_DS) = 0.3 V at 300 K. We also analyzed the temperature-dependent characteristics of the fabricated TFETs and confirmed that the on-state characteristics were insensitive to temperature variations. From 77 K to 300 K, the subthreshold swing at gate voltage (V_GS) = threshold voltage (V_T), and it was constant at 115 mV/decade, thereby indicating that the conduction mechanism through band-to-band tunneling influenced the on-state characteristics of the devices.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.323-329
• /
• 2011

Certified reference materials (CRMs) have been used to calibrate surface profilers for reliable measurements. In this paper, we present a newly designed step height CRM which has a step height pattern with two different widths and various special patterns for checking radial magnification, distortion of optical viewing systems, etc. Especially, it could be useful for multi-probe inspection instruments in the manufacturing lines. The fabrication was done by conventional optical lithography and dry etching process with optimized conditions. To verify the step height values, a white-light scanning interferometer was used with objective lenses having magnification of $10{\times}$ and $100{\times}$. CRMs with nominal step heights of $0.5\;{\mu}m$, $1\;{\mu}m$, $3\;{\mu}m$, $5\;{\mu}m$, $7\;{\mu}m$, and $10\;{\mu}m$ were fabricated and the uniformity of these CRMs was evaluated to be less than 3 nm ($1{\sigma}$).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.148-148
• /
• 2011

일반적으로 LED 제작에 사용되는 c-plane GaN는 c축 방향으로 발생하는 분극의 영향을 받게 된다. 분극은 LED내 양자우물의 밴드를 기울게 하여 그 결과 전자와 홀의 재결합 확률을 감소시켜 낮은 내부양자효율을 가지게 된다. 이러한 문제를 해결하기 위한 여러 가지 방법들이 제시되었는데 그 중에서도 특히 a-plane 혹은 m-plane면과 같은 무분극 면을 사용하는 GaN LED가 주목받고 있다. 그 이유는 무분극 면은 분극이 발생하는 c축과 수직이기 때문에 분극의 영향을 받지 않아 높은 내부 양자효율을 가질수 있다. 본 연구에서는 MOCVD 장비를 사용하여 2인치 r-plane 사파이어 기판위에 3um두께의 a-plane GaN을 성장하였다. 그위에 2um정도로 Si을 도핑하여 n-type GaN 형성한후 단일 양자우물, 그리고 Mg을 도핑하여 p-type GaN을 성장하였다. 장파장대역의 a-plane LED의 특성을 알아보기 위해서 양자우물 형성시 In의 조성비를 높였다. 일반적인 포토리소그래피 공정과 Dry etching 공정을 사용하여 메사구조를 형성하였으며 Ti/Al/Pt/Au와 Ni/Au를 각각 n-type과 p-type의 전극 물질로 사용하였다. 제작된 LED의 특성을 파악하기 위해서 인가전류를 0부터 100mA까지 출력 스펙트럼을 측정하였으며 orange대역의 파장을 갖는 LED를 얻었다. 인가전류별 Peak 파장의 변화와 반측폭의 변화를 파악하여 장파장 대역의 a-plane LED의 특성을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.98-99
• /
• 2012

Deposition of thin films using magnetron sputtering plasmas is a well-developed, classical technology. However, detailed investigations using advanced diagnostics are insufficient in magnetron sputtering, in comparison with plasma-aided dry etching and plasma-enhanced chemical vapor deposition. In this talk, we will show examples of diagnostic works on magnetron sputtering employing metal targets. Diagnostic methods which have fine spatial resolutions are suitable for magnetron sputtering plasmas since they have significant spatial distributions. We are using two-dimensional laser-induced fluorescence spectroscopy, in which the plasma space is illuminated by a tunable laser beam with a planer shape. A charge-coupled device camera with a gated image intensifier is used for taking the picture of the image of laser-induced fluorescence formed on the planer laser beam. The picture of laser-induced fluorescence directly represents the two-dimensional distribution of the atom density probed by the tunable laser beam, when an intense laser with a relatively wide line-width is used. When a weak laser beam with a relatively narrow linewidth is used, the laser-induced fluorescence represents the density distribution of atoms which feel the laser wavelength to be resonant via the Doppler shift corresponding to their velocities. In this case, we can obtain the velocity distribution function of atoms by scanning the wavelength of the laser beam around the line center.

• Journal of Biomedical Engineering Research
• /
• v.22 no.2
• /
• pp.145-150
• /
• 2001

대뇌 피질에 삽입하여 깊이에 따라 신경 신호를 기록하기 위한 탐침형 반도체 미세전극 어레이(depth-type silicon microelectrode array, 일명 SNU probe)를 제작하였다. 붕소를 확산시켜 생성된 고농도 p-type doping된 p＋ 영역을 습식식각 정지점으로 사용하는 기존의 방법과 달리 실리콘 웨이퍼의 앞면을 건식식각하여 원하는 탐침 두께만큼의 깊이로 트렌치(trench)를 형성한 후 뒷면을 습식식각하는 방법으로 탐침 형태의 미세 구조를 만들었다. 제작된 반도체 미세전극 어레이의 탐침 두께는 30 $\mu\textrm{m}$이며 실리콘 건식식각을 위한 마스크로 6 $\mu\textrm{m}$ 두께의 LTO(low temperature oxide)를 사용하였다. 탐침의 두께는 개발된 본 공정을 이용해서 5~90 $\mu\textrm{m}$ 범위까지 쉽게 조절할 수 있었다. 탐침의 두께를 보다 쉽게 조절할 수 있게 됨에 따라 여러 신경조직에 필요한 다양한 구조의 반도체 미세전극 어레이를 개발할 수 있게 되었다. 본 공정을 이용해서 개발된 4채널 SUN probe를 사용하여 흰쥐의 제1차 체감각 피질에서 4채널 신경 신호를 동시에 기록하였으며, 전기적 특성검사에서 기존의 탐침형 반도체 미세전극, 텅스텐 전극과 대등하거나 우수한 신호대 잡음비(signal to noise ratio, SNR)특성을 가짐을 확인하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.1
• /
• pp.105-115
• /
• 1999

P-type의 단결정 실리콘 위에 $1000{\AA}$의 열산화막을 성장시킨후 $5500{\AA}$의 다결정 실리콘으로 증착된 시료를 가지고 $HBr/Cl_2/He-O_2$ 혼합기체로 식각할 때 시료의 식각 특성에 관한 $H_2-O_2$ 기체함량. RF 전력, 압력에 대한 영향을 XPS(X-ray photoelectron Spectroscopy)와 SEM(Scanning Electron Microscopy)으로 조사하였다. $HBr/Cl_2/He-O_2$ 혼합기체로 식각되는 동안 형성된 다결정 실리콘 식각속도는 $H_2-O_2$ 함량 증가에 따라 증가하였으며 식각잔유물은 RF 전력과 압력변화에 의해 영향은 받지 않는 것으로 나타났으며, 다결정 실리콘 측벽에서의 증착속도는 낮은 RF전력과 높은 압력에서 높게 나타났다. 다결정 실리콘 식각 잔유물의 결합에너지는 안정한 $SiO_2$인 열산화막의 경우보다 높으므로 식각 잔유물은 $SiO_{\chi}({\chi}>2)$의 화합결합을 가지는 산화물과 같은 잔유물로 생각된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.145-148
• /
• 2007

The authors report on the fabrication of thin film transistors (TFTs) that use amorphous indium-gallium-zinc oxide (a-IGZO) channel and have the channel length (L) and width (W) patterned by dry etching. To prevent the plasma damage of active channel, a 100-nm-thckness $SiO_{x}$ by PECVD was adopted as an etch-stopper structure. IGZO TFT (W/L=10/50${\mu}m$) fabricated on glass exhibited the high performance mobility of $35.8\;cm^2/Vs$, a subthreshold gate voltage swing of $0.59V/dec$, and $I_{on/off}$ of $4.9{\times}10^6$. In addition, 4.1” transparent QCIF active-matrix organic light-emitting diode display were successfully fabricated, which was driven by a-IGZO TFTs.