• The Plant Pathology Journal
• /
• v.38 no.4
• /
• pp.403-409
• /
• 2022

In biological particles such as Fusarium species, ice nucleation activity (INA) has been observed. Fusarium strains isolated from apple declined trees in Korea were identified with a multilocus sequence analysis using the tef1 and rpb1 genes. Droplet-freezing and tube-freezing assays were used to determine the INA of the strains, using Pseudomonas syringae pv. syringae KACC 21200 as a positive control and resulting in seven INA+ fungal strains that were identified as F. tricinctum (KNUF-21-F17, KNUF-21-F18, KNUF-21-F29, KNUF-21-F32, KNUF-21-F38, KNUF-21-F43, and KNUF-21-F44). The effect of Fusarium INA+ KNUF-21-F29 was compared to that of INA- strains on Chrysanthemum morifolium cv. Shinma explants. A higher callus formation and no-shoot formation were observed, suggesting that fungal INA could play a role in cold injuries and be a factor to consider in rapid apple decline. To the best of our knowledge, this is the first report of INA fungal strains isolated in Korea.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.7
• /
• pp.926-933
• /
• 2023

Aspergillus oryzae KCCM 11372 was used to enhance the production of β-glucan using humidity control strategies. Under conditions of 60% humidity, solid-state fermentation (SSF) increased the yields of enzymes (amylase and protease), fungal biomass (ergosterol), and β-glucan. The maximum concentrations obtained were 14800.58 U/g at 72 h, 1068.14 U/g at 120 h, 1.42 mg/g at 72 h, and 12.0% (w/w) at 72 h, respectively. Moreover, the β-glucan containing fermented brown rice (β-glucan-FBR) extracts at concentrations of 25-300 ㎍/ml was considered noncytotoxic to 3T3-L1 preadipocytes. We then studied the inhibitory effects of the extracts on fat droplet formation in 3T3-L1 cells. As a result, 300 ㎍/ml of β-glucan-FBR extracts showed a high inhibition of 38.88% in lipid accumulation. Further, these extracts inhibited adipogenesis in the 3T3-L1 adipocytes by decreasing the expression of C/EBPα, PPARγ, aP2, and GLUT4 genes.

• Animal cells and systems
• /
• v.15 no.4
• /
• pp.287-294
• /
• 2011

The accelerated cooling rate associated with vitrification reduces injuries attributed to cryopreservation and improves the post-freezing developmental competence of vitrified embryos. In this study, embryos were vitrified and warmed and morphologically evaluated for their development to blastocysts. Survival rates between the fresh ($96.7%{\pm}3.8%$) and vitrified embryos ($90.7%{\pm}5.1%$) did not differ significantly (P>0.05). The mitochondrial membrane potential of fresh control cells measured by 5,5',6,6'-tetrachloro-1,1',3,3'-tetraethylbenzimidazolyl carbocyanide iodide staining was similar to that of cryoprotected and vitrified embryos. Mitochondrial staining with rhodamine 123 did not differ among the fresh, cryoprotected, and vitrified embryos. Moreover, the distribution of $H_2O_2$, assessed by 2',7'-dichlorodihydrofluorescein diacetate staining, did not differ among the groups. The results showed that the developmental rate did not differ significantly among the fresh ($87.8%{\pm}11.3%$), cryoprotected ($83.2%{\pm}7.6%$), and vitrified 2-cell embryos ($75.8%{\pm}14.2%$). The mean number of the inner cell mass (ICM), trophectoderm (TE), and apoptotic cells was counted and statistically compared, and although the number of ICM and TE was decreased in the cryoprotected and vitrified embryos, there were no significant differences among the groups (P>0.05). During the cultivation period, randomly selected blastocysts from each group were stained using either 4',6-diamidino-2-phenylindole and bisbenzimide or the terminal deoxynucleotidyl transferase mediated dUTP nick-end labeling technique. The incidence of apoptosis appeared to be almost identical in all the groups. Droplet vitrification could subsequently lead to high survival and developmental rates of cryopreserved mouse embryos.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.66-71
• /
• 2010

Spherical shape $Zn_2SiO_4:Mn$ phosphor particles with the mean particle size from submicron to micron sizes were prepared by ultrasonic spray pyrolysis method. A droplet separator was introduced to control the size distribution of the phosphor particles with spherical shape. The $Zn_2SiO_4:Mn$ phosphor particles with 2 mol% doping concentration of manganese have decay time and have photoluminescence intensities comparable with those of the latest commercial product prepared by the solid state reaction method. The size of the phosphor particles was decreased from 1 to 0.2 micrometers as the inorganic salt solution concentration was changed from 0 to 5 M. The phosphor particles prepared from the solutions above 0.5 M have photoluminescence intensities comparable with that of the latest commercial product.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.52-59
• /
• 2008

Sol-gel process applied in this study was carried out by chelation of metal ions and citric acid. From the results of thermal gravimetric analysis and XRD analysis of gel powder obtained through sol-gel and heat treatment, gel powders are mostly amorphous, and crystallize completely at $900^{\circ}C$, and the crystalline structure of YAG increases with increasing calcinations temperature. Since YAG prepared by sol-gel & calcinations process was porous, and the sape and size was irregular and nonuniform, the shape and size of YAG powder had to be controlled. Therefore the effects of organic materials such as ethylene glycol and surfactant on the crystalline structure of YAG powder were investigated. Polyesterification of ethylene glycol and citric acid separated reaction area of metal ions in the solution and decreased the size of YAG primary particles. The addition of Igepal 630 as surfactant formed the droplet in the solution, and increased the size of primary particles which forms the aggregate of YAG In order to obtain monodispersed YAG particles of uniform size, gel powder prepared with organic materials had to be milled before calcination. And milling process was very important for obtaining YAG of uniform size.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.101-109
• /
• 2003

Provitamin $B_5$ liquid crystal ($PVB_5$-LC) was the new emulsion system to enhance moisturizing activity on the skin. In this study, it should be mentioned that PVB5-LC could be prepared with the main compound of hydrogenated lecithin (HL) in oil-in water (O/W) emulsion. The key ingredient of humectants was contained 2% of provitamin $B_5$ ($PVB_5$) into the $PVB_5$-LC. The best suitable compositions of $PVB_5$-LC were made from 4.0 wt% of HL, 4.0 wt% of cetostearyl alcohol (CSA) as emulsifier and gelling agent, 3.0 wt% of 1,3-butylene glycol (1,3-BG) and 2.0 wt% of glycerin as moisturizers, 3.0 wt% of cyclomethicone (CMC), 3.0 wt% of isononanoate (ININ), 3.0 wt% of capric/caprylic triglyceride (CCTG), 3.0 wt% of macadamia nut oil (MNO) as emollients. As the analytical result of $PVB_5$-LC, it could know that the distribution range of particle size was 0.14 to 12.37 m level (mean size 3.24 m). It was certified the multi lamellar phase around the droplet of liquid crystal when observed the droplet particles through a polarization microscope. And it clinically was tested the effectiveness of moisturizing activity (in-vivo) compared with control sample (O/W emulsion). The effectiveness of moisturizing activity of $PVB_5$-LC with Skincon-200EX after 6 hours went up 49.0% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 25.7% (p<005, n=20). Also, in case of Comeometer CM-825, the moisturizing activity of $PVB_5$-LC after 6 hours rose 36.6% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 10.8%. Therefore, it was known that the effectiveness moisturizing activity of $PVB_5$-LC with HL was remarkably superior compared with O/W emulsion cream.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.423-426
• /
• 2020

This study was performed to investigate how the addition of starch nanoparticles prior to whipping could affect the quality characteristics and stability of full-fat dairy cream. Starch nanoparticles were prepared by dry heating under mildly acidic conditions and added to dairy cream as amount of 1, 3, and 5% (w/w). The whipped cream's storage stability, viscosity, overrun, and droplet size were investigated in combination with various starch nanoparticle contents. The storage stability and apparent viscosity increased in parallel with the increasing starch nanoparticle content compared to the control. The mean size and homogeneity of the droplets in the whipped cream increased with higher starch nanoparticle addition levels. Even though the whipped cream overrun was reduced by the addition of starch nanoparticles, the 1% addition level exhibited a similar overrun value as the control.

• Journal of ILASS-Korea
• /
• v.14 no.4
• /
• pp.147-152
• /
• 2009

Since a liquid-phase LPG injection system allows accurate control of fuel injection and increase in volumetric efficiency, it has advantages in achieving higher engine power and lower emissions compared to the mixer type LPG supplying system. However, this system also leads to an unexpected event called icing phenomenon which occurs when moisture in the air near the injector freezes and becomes frost around the nozzle hole due to extraction of heat from surrounding caused by instant fuel vaporization. As a result, it becomes difficult to control air/fuel ratio in engine operation, inducing exacerbation of engine performance and HC emission. One effort to mitigate icing phenomenon is to attach anti-icing injection tip in the end of nozzle. Therefore, in this study, the effect of engine operation parameters as well as surrounding conditions on icing phenomenon was investigated in a bench test rig with commercially-used anti-icing injection tips. The test results show that considerable ice was deposited on the surface near the nozzle hole of the anti-icing tip in low rpm and low load operating conditions in ambient air condition. This is because acceleration of detachment of deposited ice from the tip surface was induced in high load, high rpm conditions, resulting in decrease in frost accumulation. The results of the bench testing also demonstrate that little or no ice was formed at surrounding temperature below a freezing point since the absolute amount of moisture contained in the intake air is too small in such a low temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.961-970
• /
• 1997

A numerical method is presented to predict and analyze the shape of a growing billet produced from the "spray forming process" which is a fairly new near-net shape manufacturing process. It is important to understand the mechanism of billet growing because one can obtain a billet with the desired final shape without secondary operations by accurate control of the billet shape, and it can also serve as a base for heat transfer and deformation analysis. The shape of a growing billet is determined by the flow rate of the alloy melt, the mode of nozzle scanning which is due to cam profile, the initial positio of the spray nozzle, scanning angle, and the withdrawal speed of the substrate. In the present study, a theoretical model is first established to predict the shape of the billet and next the effects of the most dominent processing conditions, such as withdrawal speed of the substrate and the cam profile, on the shape of the growing billet are studied. Process conditions are obtained to produce a billet with uniform diameter and flat top surface, and an ASP30 high speed steel billet is manufactured using the same process conditions established from the simulation.imulation.