• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.463-467
• /
• 2000

In this paper, the new LIGBT structures with trap injection are proposed to improve switching characteristics of the conventional SOI LIGBT. The Simulations are performed in order to investigate the effects of the positiion, whidth and concentration of trap injection region with a reduced minority carrier lifetime using 2D device simulator MEDICI. Their electrical characteristics are analyzed and the optimum design parameters are extracted. As a result of simulation, the turn off time for the model A with the trap injection is $0.78\mus$. These results indicate the improvement of about 2 times compared with the conventional SOI LIGBT because trap injection prevents minority carriers which is stored in the n-drift region during turn off switching. The latching current is $1.5\times10^{-4}A/\mum$ and forward blocking voltage is 168V which are superior to those of conventional structure. It is shown that the trap injection is very effective to reduce the turn off time with a little increasing of on-state voltage drop if its design and process parameters are optimized.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.151-157
• /
• 1995

Frequency-dependent electrical properties of $C_{22}$-Quinolinium(TCNQ) LB films were investigated in a frequency range of 10[Hz]-13[MHz] along a perpendicular direction. The films were heat-treated to understand an electrodynamic response in a temperature range of 20-240[.deg. C]. Frequencydependent dielectric constants show that there are two characteristic dispersions; one is a dispersion occuring near 1[MHz] coming from the orientational polarization of the molecules and the other one is an interfacial polarization effect below 1[kHz] or so when the annealing temperature is above 80 [.deg. C]. The overall frequency-dependent dielectric constant is higher near 80[.deg. C]. It may be due to a softness of the alkyl chains. Several other methods were employed to identify the internal structure change of the films. DSC(differential scanning calorimetry) data of the $C_{22}$-Quinolinium(TCNQ) molecules shows that there is an endothermic process near 110[.deg. C] and a weak exothermic process near 180[.deg. C]. While the endothermic process is related to a disordering of the alkyl chains, the exothermic process seems to be due to a chemical structure change of the TCNQ molecules. Thickness measurement by ellipsometry shows that there is a thickness drop near 100[.deg. C], and the thickness above 120[.deg. C] becomes around 20[%] of the room-temperature value.lue.

• Composites Research
• /
• 제26권2호
• /
• pp.116-122
• /
• 2013

본 연구는 동일한 코어재를 가지는 알루미늄과 유리섬유의 하니컴 샌드위치 판넬의 저속 충격시 발생하는 충격 거동 및 압축 실험을 통하여 압축 강도와 압축 계수를 살펴본다. 저속 충격을 받는 하니컴의 충격 거동을 살펴보기 위하여 중량 낙하식 충격 시험을 실시하며, 충격을 가한 후 데이터 분석 및 현미경을 통하여 전형적인 충격파손모드와 손상정도를 비교 평가하였다. 동일한 충격에너지일 때 유리섬유 하니컴 샌드위치 판넬이 알루미늄 하니컴 샌드위치 판넬보다 최대 하중이 높고, 탄성 에너지가 크며, 충격 강도가 높은 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.319-324
• /
• 2007

The structural properties of $SiO_2$ liquid at finite temperatures have been investigated by molecular dynamics (MD) simulations utilizing the Tersoff interatomic potential. During cooling process, the $SiO_2$ liquid structure quenched with a cooling rate of $1.0{\times}10^{11}K/sec$ shows the traditional properties observed in the experiments. The coordination defects of system decrease with decreasing temperature up to 17%. The $SiO_2$ glass quenched up to 1600 K contains defects consisting of the fivefold coordination of Si, and the threefold coordination of O atoms. The calculated diffusion coefficients which are calculated by monitoring. the mean-square displacement of atoms drop to almost zero below 3000 K ($<10^{-6}\;cm^2/sec$) but has a fluctuations at low temperature. The structure properties of $SiO_2$ liquid shows a significant dependence on the temperature during cooling process. Bond-angle distribution at around $120^{\circ}$ originate from the O and Si atoms consisting of the over-coordinated O atoms.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.447-454
• /
• 2008

The regenerative evaporative cooler(REC) is to cool a stream of air using evaporative cooling effect without an increase in the humidity ratio. In the regenerative evaporative cooler, the air can be cooled down to a temperature lower than its inlet wet-bulb temperature. Besides the cooling performance, for practical application of the regenerative evaporative cooler, the compactness of the system is also a very important factor to be considered. In this respect, three different configurations, i.e., the flat plate type, the corrugated plate type, and the finned channel type are investigated and compared for the most compact configuration. The optimal structure of each configuration is obtained individually to minimize the volume for a given effectiveness within a limit of the pressure drop. Comparing the three optimal structures, the finned channel type is found to give the most compact structure among the considered configurations. The volume of the regenerative cooler can be reduced to 1/8 by adopting the finned channel type as compared to that of the flat plate type.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.173-176
• /
• 2020

This study focuses on a pillar in which is implanted a P-type maneuver under a P base. This structure is called a super junction structure. By inserting the pillar, the electric field concentrated on the P base is shared by the pillar, so the columns can be dispersed while maintaining a high breakdown voltage. Ten pillars were generated during the multi epitaxial process. The interval between pillars is varied to optimize the electric field to be concentrated on the pillar at a threshold voltage of 6 V, a yield voltage of 4,500 V, and an on-state voltage drop of 3.8 V. The density of the filler gradually decreased when the interval was extended by implanting a filler with the same density. The results confirmed that the size of the depletion layer between the filler and the N-epitaxy layer was reduced, and the current flowing along the N-epitaxy layer was increased. As the interval between the fillers decreased, the cost of the epitaxial process also decreased. However, it is possible to confirm the trade-off relationship that deteriorated the electrical characteristics and efficiency.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.107-114
• /
• 2005

In order to analyze the elastic-plastic fracture behavior of a structure, the fracture resistance curve of the material should be known first. The standard CT specimen was used to obtain the fracture resistance curves of a piping system. However, it is known that the fracture resistance curve by the standard CT specimen is very conservative to evaluate the integrity of a structure. Also the fracture resistance curve is effected by the specimen geometry and the dimensions because of the constraint effect. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide an additional safety margin. For these, the fracture tests using a real pipe specimen and the standard CT specimen test were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. Also finite element analyses were performed with a CT specimen and a pipe in order to prove the additional safety margin. From the result of tests and analyses of the pipe and the standard CT specimen, it was observed that the fracture analysis with the standard CT specimen is conservative and the additional safety margin was proved.

• 수산경영론집
• /
• 제50권3호
• /
• pp.59-71
• /
• 2019

In terms of coastal and marine tourism, Busan's Haeundae had the nation's representativeness, and is pushing for many kinds of related policies to revitalize the special tourism zone. Due to a drop in the number of beach users, it is inevitable for the Haeundae Special Tourist Zone to face active responses to new trends emerging in the global tourism market. Therefore, the purpose of this study is to present a tourism strategy for making the Suyeong River as a more competitive ourist resource along the zone. First, a language network analysis is conducted through interviews to understand the ideas of interest groups for the river cruise activation project. Second, the frame structure of stakeholders is used to analyze solutions by comparing the similarities and differences in recognition frames of interest groups. Third, we intend to analyze the detailed frame types of stakeholders and present new alternatives based on the structure of relationships between types.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1546-1552
• /
• 2018

The polymer nanocomposite as a gate dielectric film was prepared via sol-gel method. The formation of crosslinked structure among nanofillers and polymer matrix was proved by Fourier transform infrared spectroscopy (FT-IR). Differential thermal analysis (DTA) results showed significant increase in the thermal stability of the nanocomposite with respect to that of pure polymer. The nanocomposite films deposited on the p- and n-type Si substrates formed very smooth surface with rms roughness of 0.045 and 0.058 nm respectively. Deconvoluted $Si_{2s}$ spectra revealed the domination of the Si-OH hydrogen bonds and Si-O-Si covalence bonds in the structure of the nanocomposite film deposited on the p- and n-type Si semiconductor layers respectively. The fabricated n-channel field-effect-transistor (FET) showed the low threshold voltage and leakage currents because of the stronger connection between the nanocomposite and n-type Si substrate. Whereas, dominated hydroxyl groups in the nanocomposite dielectric film deposited on the p-type Si substrate increased trap states in the interface, led to the drop of FET operation.

• Structural Engineering and Mechanics
• /
• 제77권4호
• /
• pp.509-521
• /
• 2021

The neighbouring gaps at the mortise-tenon joint in traditional timber structure, which leads to the complexity of the joint, are considered to impair the mechanical performance of the joint. In this paper, numerical simulation of loose joint was conducted to examine the deformation states, stress distributions, and bearing capacities, which was verified by full-scale test. On the basis of the experimental and numerical results, a simplified mechanics model with gaps has been proposed to present the bending capacity of the loose joint. Besides, the gap effects and parameter studies on the influences of tenon height, friction coefficient, elastic modulus and axial load were also investigated. As a result, the estimated relationship between moment and rotation angle of loose joint showed the agreement with the numerical results, demonstrating validity of the proposed model; The bending bearing capacity and rotational stiffness of loose joint had a certain drop with the increasing of gaps; and the tenon height may be the most important factor affecting the mechanical behaviors of the joint when it is subjected to repeated load; Research results can provide important references on the condition assessments of the existing mortise-tenon joint.