• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.312-315
• /
• 1995

The base/gate drive suppression method proposed by Joshi and Bose is that which detects the output current polarity of the leg and, according to the polarity, suppresses the base/gate drive of one of the ore switching devices of the leg. This method has the merit that it does not have the conventional dead time problem, reduces the power loss of the driving circuit and others. But this method has difficulty in implementation. In this paper, a new base/gate drive suppression method by detecting not the output current polarity but the output voltage polarity is proposed. The proposed method is easier to implement than Joshi and Bose's method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.316-320
• /
• 1995

This paper proposes two base/gate drive suppression methods of NPC inverters. The first is the output current polarity detection type, which can be regarded as an extension of Joshi and Bose's method for ordinary inverters. But this method has difficulties in implementation. The second is the output voltage polarity detection type, which is easier to implement than the former. The base/gate drive suppression methods have the merit that it does not have the dead time problem, reduces the power loss of the driving circuit, and others.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.199-202
• /
• 2009

Scan design is currently the most widely used structured Design For Testability approach. In scan design, all storage elements are replaced with scan cells, which are then configured as one or more shift registers(also called scan chains) during the shift operation. As a result, all inputs to the combinational logic, including those driven by scan cells, can be controlled and all outputs from the combinational logic, including those driving scan cells, can be observed. The scan inserted design, called scan design, is operated in three modes: normal mode, shift mode, and capture mode. Circuit operations with associated clock cycles conducted in these three modes are referred to as normal operation, shift operation, and capture operation, respectively. In spite of these, scan design methodology has defects. They are power dissipation problem and test time during test application. We propose a new methodology about scan shift clock operation and present low power scan design and short test time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.639-640
• /
• 2008

본 논문에서는 조작기에 의해 동작하는 초고압 SF6 가스 차단기의 냉가스 유동 해석에 대해 다룬다. 조작기 내에서 작용하는 힘들을 해석하여 나온 변위를 이용하여 차단기의 동작을 모의하였다. 차단기의 냉가스 유동 해석 시 FVFLIC 법을 이용하여 압력을 결정하였고 이것은 조작기의 힘 해석에 사용되었다. 해석 결과인 스트로크, 힘, 피스톤 전면 압력 상승은 실험 결과들과 비교하여 검증되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.185-187
• /
• 2008

This paper proposed design and development of a photo voltaic (PV) array fed induction motor drive. A drive system using a chopper circuit to track maximum power from the PV for different solar insolation and a current controlled voltage source inverter (CC-VSI) to optimally match the motor to PV characteristics is presented. The model equations governing interaction of torque and flux producing components of motor current with available solar power is developed for the operation of the system at optimum efficiency. Performance of the system is presented for different realistic operating conditions, which demonstrates its special features for applications such as solar water pumping system, solar vehicles and floor mills located in hilly and isolated areas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.79-80
• /
• 2015

This paper deal with the structure and the operating characteristics of the two-dimensional elevator system and the concept that supports to the circuit design for the driving control of the LIM in the simplest possible way. The Horizontal Axis, The Vertical Axis, that is to say, designed a motor that can move between two dimensions by using two of LIMs, especially this control system was described by a sequence control design drawing. The body of this paper has shown the characteristics and validity of this control design system and also analyzed how to apply operating characteristics of the LIM in the elevator industry.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.594-595
• /
• 2015

본 논문에서는 직류차단기 내부 아크 러너 구조에 따라 아크에 작용하는 구동력 차이에 대한 연구를 수행하였다. 컴퓨터 시뮬레이션을 통해 아크 러너 기울기를 변화에 따라 아크 구동력을 계산하였으며, 결과 값들에 대한 비교 분석을 통해 아크 구동력 차이의 발생을 확인하였다. 구동력 차이의 발생 원리를 알아보고 아크구동력 향상 방안에 대해 연구하였으며, 결과 방안을 차단시간 단축 요소로써 활용할 수 있을 것으로 기대한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.993-997
• /
• 1998

This paper presents a two-switch boost chopper with a sinewave current shaping and power factor correction scheme, which is applied for driving electronic ballast using high frequency resonant inverter. A working principle of the proposed one-converter type electronic ballast with power factor correction and active filtering schemes is described on the bases of the equivalent circuit of each operation mode, together with operation analysis. The steady-state performance evaluations of this electronic ballast are illustrated and discussed in experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.95-98
• /
• 2002

본 논문에서는 AC-PDP 구동에 있어 효율적이며, 패널 전압을 빠르게 상승시킬 수 있어 현재 많이 이용되는 ADS 구동 방식에 적합한 에너지 회수 회로를 제안한다. 제안된 회로는 기존의 LC 순수 공진의 방식을 적용하여 에너지를 회수하는 방식 Weber 회로와 비교하여 제한적인 유지 기간 동안 동작 여유 마진을 증가시킬 수 있고, 픽셀의 ON$\cdot$OFF 상태와 상관없이 효율을 증가시킬 수 있다. 제안하는 회로를 기존의 Weber 회로와 비교하여 동작원리와 특징들을 분석하고, 7.5 인치 PDP 시작품을 이용하여 제안하는 회로의 타당성과 우수성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.781-784
• /
• 2003

In this paper, high density on-board dc/dc converter using multi-layer PCB is proposed. Recently, the communication system wants power supply of open-frame, high density and low profile. So experimental converter was consisted of 3.3V/30A Quarter Brick size DC/DC Converter. To power height limit, coil of transformer, choke and circuits were consisted of multi layer PCB. Besides to improve of efficiency, made secondary synchronous rectifier Mosfet driving circuit. So total efficiency could be improved.