• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.830-837
• /
• 2000

This paper deals with an analysis and countermeasure of escalator vibration. The vibration characteristics of escalators are studied theoretically and experimentally to fine the main cause of severe vibration. The main source of vibration in escalators is found to be chordal effect due to the step chain and sprocket system. It is also found that the vibration become significantly large at so called no load condition, in which the load due to passengers, during down-moving, is equal to the resistive force in the driving system. Dynamic absorbers are implemented to suppress the vibration, A theoretical analysis is made to determine the appropriate dynamic absorber. Theoretical and experimental study shows that dynamic absorber is effective to suppress the vibration in escalators.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.105-111
• /
• 1995

The inverse dynamic equations for 5 link robot including a closed chain have been derived. The closed chain is virtually cut open, and the kinematics and dynamics of the virtual open chain robot are analyzed. The constraints are applied to the virtually cut joints by the Jacobian matrix which represents the configuration of the closed chain. The topology of tree structrued open chain robot is described by a FATHER array. The FATHER array of a link indicates the link tha tis connected in the direction of base link. Based on the inverse dynamic equations, the torque sensitivity models of the 5 link robot have been developed. The sensitivity models characterize the sensitivity of the driving torque with respect to the link parameters. All the procedures are illustrated through the 2 link robot.

• Asian Journal of Business Environment
• /
• v.2 no.2
• /
• pp.35-39
• /
• 2012

Purpose - Today's world is rapidly changing due to swift changes in organization's infrastructures and supply chain is becoming an important factor which affects the organization's global competitiveness. Research design / data / methodology - Researchers indicated that environment uncertainty is considered an external driving force to establish a unique supply chain. Market competition, reducing the gap of performance and quality between the products are compelling the practitioners and researcher to change the paradigm of managing the business processes effectively and efficiently. Results - In old times, supply chain of any organization was measured on the basis of inventory turns, defect rats, lead times, stock buffering and service level. But, Lee H.L. in 2004, published an article in Harvard Business Review who proposed three A (Adaptable, Agile and Aligned) termed as "Triple-A" of successful supply chain. Conclusions - He claimed that organizations can compete through the creation of Triple-A supply chain. Hence, the basic aim of this review paper is to develop basic insights regarding what is Triple-A of supply chain, its importance and functioning in today's competitive world.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.22-26
• /
• 2001

This paper presents the idea of staggered voting for the efficient TMR implementation of shift register chains for improving the yield of Poly-Si TFT-LCD driving circuits. The paper discusses the characteristic features of staggered voting and performs a quantitative evaluation of its effectiveness. Staggered voting allows us to improve the reliability of a single-voter TMR chain significantly when the probability of a voter failure is not negligible.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.205-206
• /
• 2018

Recently, interest in unmanned vehicles, autonomous vehicles and connected cars has increased, and autonomous driving capability is also increasing. Depending on the autonomous driving ability, the maximum number of steps is divided into 6 steps. The higher the step, the less the involvement of the person in the running, and the person does not need to be involved at the highest stage. Today's autonomous vehicles have been developed in stages 4 to 5, but solutions are not clearly defined in case of an accident, so only the test run is possible. Such an accident occurring during traveling is almost inevitable, and it is judged who has made a mistake in case of an accident, which increases the punishment for the accident. Although a black box is used to clarify such a part, it is easy to delete a photographed image, and it is difficult to solve an accident such as a hit-and-run. In this paper, we design a driving record system using black chain to solve such an accident.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2018

Recently, bicycle has means of effective healthy transportation, and riding the bicycles is considered as popular recreational and sporting activities. Also, the saddle, steering system, driving device and braking device are researched briskly because of consumer's need for driving performance and comfort. Especially, the importance of a cassette responsible for transmission function by transmitting power to the drive shaft through the chain is very focused. The writer conducted structural analysis for the sprocket of each level using the ANSYS widely used for the analysis. Speed shifting performance was enhanced by minimization / simplification of shifting point through a sort of tooth profile of the cassette. By partitioning a clear value type and other shifting point, it has been modified to enable smooth speed-shifting. In addition, as titanium precision forming process, this study studied the molding technique by blanking and dies forging for mass production of the cassette. so it could be expected that the entire drive train would utilize that in the future. The stamping process capability for thin materials for the mass production of the sprockets is applicable to producing automobile parts, so lightweight component production is likely to be possible through that, for the safety of driving.

• The Journal of Korea Robotics Society
• /
• v.7 no.2
• /
• pp.113-119
• /
• 2012

In this paper we propose the method that detects moving objects in autonomous navigation vehicle using LRF sensor data. Object detection and tracking methods are widely used in research area like safe-driving, safe-navigation of the autonomous vehicle. The proposed method consists of three steps: data segmentation, mobility classification and object tracking. In order to make the raw LRF sensor data to be useful, Occupancy grid is generated and the raw data is segmented according to its appearance. For classifying whether the object is moving or static, trajectory patterns are analysed. As the last step, Markov chain Monte Carlo (MCMC) method is used for tracking the object. Experimental results indicate that the proposed method can accurately detect moving objects.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.22-27
• /
• 2012

This paper presents a ball screw-driven robotic gripper mechanism which is possible to grasp an object and analyzes its kinematic feature for grasping by simulation. For the purpose of identifying the feature of the robot gripper, we try to confirm the kinematics relating the joint space of the driving actuator to the gripper's tip space. To be specific, the proposed robot gripper employs one actuator and a symmetrical closed-chain structure. As a result, the specified robot gripper has an advantage of robustness to external forces structurally, and it is easy to implement simple grasping operations. Also the gripper has a useful squeezing effect for power grasping.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.333-339
• /
• 2004

This paper is concerned with an experimental investigation about tractive performance of a tracked vehicle on extremely soft soil. A tracked vehicle model with principal dimensions of $0.9\;m(L)\;{\times}\;0.75\;m(B)\;{\times}\;0.4\;m(H)$ and the weight of 167 kg was constructed with a pair of driving chain links driven by two AC-servo motors. The tracks are configured with detachable grousers with variable span. Deep seabed was simulated by means of bentonite-water mixture in a soil bin of $6.0\;m(L)\;{\times}\;3.7\;m(B)\;{\times}\;0.7\;m(H)$. Slip of vehicle and driving torque of motor were measured with respect to experimental variables; grouser span, grouser chevron angle, driving speed, drawbar-pull weight, position of center-of-gravity and weight. $L_8$ orthogonal array is adopted for DOE (Design Of Experiment). The effects of experiment variables on traction performance are evaluated.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.4 s.71
• /
• pp.37-42
• /
• 2006

This paper is concerned with experimental investigation of steering performance of a tracked vehicle on extremely soft soil. A tracked vehicle model with principal dimensions of 0.9 m(L)x0.75 m(B)x0.4 m(H) and weight of 167 kg was constructed with a pair of driving chain links, driven by two AC-servo motors. The tracks were configured with detachable grousers with variable span. A deep seabed was simulated by means of a bentonite-water mixture in a soil bin of 6.0 m(L)x3.7 m(B)x0.7 m(H). The turning radii of vehicle and driving torques of motors were measured with respect to experiment variables: steering ratio, driving speed, grouser chevron angle, grouser span, and grouser height. L8 orthogonal table is adopted for DOE (Design of experiment). The effects of experiment variables on steering performance are evaluated.