• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.224-227
• /
• 2015

일반적으로 자동차드라이버의 스마트폰을 통한 데이터전송은 자동차운전자의 핸드폰은 데이터를 실시간으로 원격데이터 센터에 전송하는 경우에 용량 의존적인 순위를 가지고 있다. 생성되는 진단보드 데이터들은 드라이버의 폰에서의 모바일 진단 어플리케이션에 임시적으로 저장하고, 인터넷에 연결 되었을 때 데이터 센터에 전송한다. 클라우드에서 실행에 방해하는 다른 태스크들이 없는 원격 자동차 어플리케이션 사용방법을 위한 node.js는 모바일 네트워크을 통한 클라우드에서 데이터 저장업무를 다루기 위하여 적합하다. 우리는 외부 어플리케이션으로부터 driver inputs and delivers output을 패스하는 원격 유저와 운용하는 스마트폰 어플리케이션에서 자동차와의 어플리케이션 interface 방법을 사용하는 실시간 분석 안드로이드 어플리케이션 반응을 시뮬레이션 통해 제안된 아키텍쳐의 유효성을 입증한다. 이 논문에서, 우리는 이벤트 루프 접근을 기반으로 하는 이것은 웹서버 구조를 특징으로 하는 원격 자동차 결함 진단 시스템 연구를 제안한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권2호
• /
• pp.104-109
• /
• 2009

At a lower supply voltage, voltage-mode drivers draw less current than current-mode drivers. In this paper, we newly propose a voltage-mode driver with an additional current path that reduces the output voltage swing without the need for complicated additional circuitry, compared to conventional voltage-mode drivers. The prototype driver is fabriccated in a 0.13-$^{\mu}m$ CMOS technology and used to transmit data streams at the rate of 2.5 Gb/s. Deemphasis is also implemented for the compensation of channel attenuation. With a 1.2-V supply, it dissipates 8.0 mA for a 400-mV output voltage swing.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.21-29
• /
• 1995

The automotive transmission is the principal component of the power transmission system which converts the engine power into the adjustable power for the vehicle driving system. To the unskilled driver the automization of transmission is required for the safety and fuel economy. In this study, the dynamic model of the automotive power transmission system was presented and simulation program and interface board which interface IBM-PC with ECU was devloped. Through the traveling simulation by interfacing ECU with simulation program, the shifting transients are investigated. For verification of simulation experiment was carried out, the results of simulation was agreed well with those of simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.865-871
• /
• 2011

This paper presents expansible driver manager that is easy to upgrade each surveillance device linkage in synthetic circumstantial judgement system. Unlike conventional surveillance systems that use fixed surveillance device and provide finite sensing data, a proposed system extends devices that not only existing but also newly develop, additional. This driver manager collects datas of standardized type from a driver of new device that developed based on common interface through configuration. And then, that transmits datas gathered to synthetic circumstantial judgement part according defined tags.

• 대한인간공학회지
• /
• 제29권1호
• /
• pp.1-5
• /
• 2010

The purpose of the paper is to review current trends and future issues of automotive ergonomics. The current trends include 1) universal design considering for regional differences, elderly drivers, female drivers, 2) quantification of driver's discomfort 3) trade-off between design trends and comfort, 4) digital ergonomic evaluation with digital human models 5) optimization of driver's interface. The future issues of automotive ergonomics cover 1) intelligent driver assistance system 2) Fun-to-drive and 3) differentiation from other vehicles based on ergonomics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.932-935
• /
• 2002

In this paper, we introduce new FTL(Flash Translation Layer) driver algorithm that tolerate the power off errors. FTL driver is the software that provide the block device interface to the upper layer software such as file systems or application programs that using the flash memory as a block device interfaced storage. Usually, the flash memory is used as the storage devices of the mobile system due to its low power consumption and small form factor. In mobile system, the state of the power supplement is not stable, because it using the small sized battery that has limited capacity. So, a sudden power off failure can be occurred when we read or write the data on the flash memory. During the write operation, power off failure may introduce the incomplete write operation. Incomplete write operation denotes the inconsistency of the data in flash memory. To provide the stable storage facility with flash memory in mobile system, FTL should provide the fault tolerance against the power off failure. SSR (Simple Sector Remapper) is a fault tolerant FTL driver that provides block device interface and also provides tolerance against power off errors.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.277-285
• /
• 2004

This paper describes an intelligent mirror adjustment system that rotates a pair of side mirrors and the room mirror of a car to the optimal position for a driver by using the location of the driver's pupils. A stereo vision system measures the three-dimensional coordinates of a pair of pupils by analyzing the input images of stereo B/W CCD cameras mounted on the instrument panel. This system determines the position angle of each mirror on the basis of information about the location of the pupils and rotates each mirror to the appropriate position by mirror actuators. The vision system can detect the driver's pupils regardless of whether it is daytime or nighttime by virtue of an infrared light source. Information about the pair of nostrils is used to improve the correctness of pupil detection. This system can adjust side mirrors and the room mirror automatically and rapidly by a simple interface regardless of driver replacement or driver's posture. Experiment has shown this to be a new mirror adjustment system that can make up for the weak points of previous mirror adjustment systems.

• 제어로봇시스템학회논문지
• /
• 제7권6호
• /
• pp.523-531
• /
• 2001

This paper describes and automatic mirror adjustment system that rotates a pair of side mirrors and the room mirror of a car to the optimal position for a driver by using the locating of the driver\`s pupils. A stereo vision system measures 3D coordinates of a pair pupils by analyzing the input images of stereo B/W CCD cameras mounted on the instrument panel. this system determines the position angle of each mir-ror on the basis of information about the location of the pupils and rotates each mirror to the appropriate po-sition by mirror actuators. The vision system can detect the driver\`s pupils regardless of whether it is day-time or nighttime by virtue of an infrared light source. information about the pair of nostrils in used to im- prove the correctness of pupil detection. This system can adjust side mirrors and the room mirror automati- cally and rapidly by a simple interface regardless of driver replacement of driver\`s posture. Experiment has shown this to be a new mirror adjustment system that can make up for the weak points of previous mirror adjustment systems.

• 대한인간공학회지
• /
• 제28권2호
• /
• pp.57-67
• /
• 2009

This study proposed a practical metaphor development process that consisted of three steps: 1) identifying major functions, 2) developing metaphor candidates, and 3) evaluating appropriateness of the candidates. In the first step, a total of 27 functions might be implemented in a driver information system (DIS) in the near future. Then, three metaphor candidates were selected from existing metaphors, which were reported to be more practical than others by previous studies. Finally, the candidates were evaluated on their appropriateness for driver information systems by using a quick and simple survey. As a result, two metaphors (a PC and a secretary) were identified as the most appropriate ones. The two metaphors can be used to design a variety of interfaces and interactions for driver information systems. In addition, the development process proposed in this study could be applied to developing metaphors for emerging devices with a variety of functions (e.g. PMPs, MP3s, and electronic dictionaries) as well as driver information systems.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.875-877
• /
• 2011

본 논문에서는 개선된 charge pump 회로를 이용하여 구성한 터치스크린 패널 드라이버를 소개한다. 터치 패널 드라이버는 크게 터치를 감지하는 아날로그 센싱 부분과 감지된 신호를 처리하는 디지털 신호 처리 부분으로 이루어진다. 제안된 터치스크린 드라이버의 동작을 확인하기 위하여 혼성 모드로 회로를 구성하고 Cadence Spectre를 이용하여 그 동작을 검증하였다. 디지털 회로 부분은 Verilog-A 모델링하여 아날로그 부분과의 인터페이스가 가능하게 하여, 그 동작을 검증함으로써 동작의 신뢰성을 확보하였고 시뮬레이션 시간을 줄일 수 있었다. 시뮬레이션 결과 ADC가 없는 간단한 구조의 디지털 신호 변환으로 터치 패널 드라이버의 안정적인 동작을 확인하였다.