• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.261-267
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as following: when the experiment was conducted with opening sizes(horizontal length) each at 2,000mm, 1,600mm, and 1,400mm, the flashover occurred at 630 seconds, 505 seconds and 510 seconds, respectively. Also, the total heating time, in proportion to this, came to 815 seconds, 713 seconds and 721 seconds. The maximum heating temperature of the exterior wall by the opening size reached 282.4℃ at 2,000mm, 382.9℃ at 1,600mm, and 423.8℃ at 1,400mm. This represented that as the opening size gets smaller, the heating temperature of the exterior wall by fire spread becomes higher.

• The Journal of Art Theory & Practice
• /
• no.16
• /
• pp.257-272
• /
• 2013

This paper analyzes six different ways of articulating the relationship between art and politics. It calls attention to the differences that lurk behind the seemingly simple phrase-everywhere in vogue today-the "politics of aesthetics." Five of these models are drawn from contemporary discussions regarding the politics of art. The last model is the attempt to develop an account of the politics of aesthetics that is faithful to the difficult and ambiguous dimensions of the aesthetic experience that were hinted at by the texts of classical philosophical aesthetics. Most notably, this paper is concerned with the idea that the aesthetic experience can be understood as a form of disinterested contemplation-one that is not reducible to cognitive or moral considerations-and with some of the consequences that this entails. It explores some of the political significance that can be attributed to this idea of disinterested contemplation, arguing that the aesthetic should be understood as a withdrawal from the world's pre-established meanings. Unlike some of the other thinkers discussed in this paper, this author doubts that a single, uniform meaning can be ascribed to the aesthetic experience. I thus argue that we need to approach the aesthetic through the networks of textual significance that have been built up around it. Throughout this paper, I attempt to explain how the efforts to link art and aesthetics to politics simultaneously give rise to ideas about the nature of the human community. In looking at the sixth and final model, what I have called the "anarchical politics of aesthetic ambiguity," I argue that the aesthetic tradition offers a rather unique way of understanding the relationship between the individual and the community. Here, we see that the aesthetic is prone to a number of paradoxes, central among them the one that makes art the bearer of a solipsistic pleasure in which we nevertheless discover our capacity for genuinely communicating with others, outside of cliches and banalities.

• Earthquakes and Structures
• /
• v.8 no.2
• /
• pp.305-377
• /
• 2015

The problem of earthquake induced torsion in buildings is quite old and although it has received a lot of attention in the past several decades, it is still open. This is evident not only from the variability of the pertinent provisions in various modern codes but also from conflicting results debated in the literature. Most of the conducted research on this problem has been based on very simplified, highly idealized models of eccentric one-story systems, with single or double eccentricity and with load bearing elements of the shear beam type, sized only for earthquake action. Initially, elastic models were used but were gradually replaced by inelastic models, since building response under design level earthquakes is expected to be inelastic. Code provisions till today have been based mostly on results from one-story inelastic models or on results from elastic multistory idealizations. In the past decade, however, more accurate multi story inelastic building response has been studied using the well-known and far more accurate plastic hinge model for flexural members. On the basis of such research some interesting conclusions have been drawn, revising older views about the inelastic response of buildings based on one-story simplified model results. The present paper traces these developments and presents new findings that can explain long lasting controversies in this area and at the same time may raise questions about the adequacy of code provisions based on results from questionable models. To organize this review better it was necessary to group the various publications into a number of subtopics and within each subtopic to separate them into smaller groups according to the basic assumptions and/or limitations used. Capacity assessment of irregular buildings and new technologies to control torsional motion have also been included.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.60-66
• /
• 2016

Compound logistics is a service aimed to enhance logistics efficiency by supporting that shippers and consigners jointly use logistics facilities. Many of these services have taken place both domestically and internationally, but the joint logistics services for e-commerce have not been spread yet, since the number of the parcels that the consigners transact business is usually small. As one of meaningful ways to improve utilization of compound logistics, we propose a brokerage service for shipper and consigners based on the hybrid recommendation system using very well-known classification and clustering methods. The existing recommendation system has drawn a relatively low satisfaction as it brought about one-to-one matches between consignors and logistics vendors in that such matching constrains choice range of the users to one-to-one matching each other. However, the implemented hybrid recommendation system based brokerage agent service system can provide multiple choice options to mutual users with descending ranks, which is a result of the recommendation considering transaction preferences of the users. In addition, we applied feature selection methods in order to avoid inducing a meaningless large size recommendation model and reduce a simple model. Finally, we implemented the hybrid recommendation system based brokerage agent service system that shippers and consigners can join, which is the system having capability previously described functions such as feature selection and recommendation. As a result, it turns out that the proposed hybrid recommendation based brokerage service system showed the enhanced efficiency with respect to logistics management, compared to the existing one by reporting two round simulation results.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.718-730
• /
• 2015

This study investigated the correlation between the level of consistency in fashion show models' appearance and design concept through a statistical and qualitative analysis of the S/S Paris Collection 2014. The following conclusions have been drawn in this study. First, the percentage of models of color was very low in regards to the physical appearance of models; in addition, there was a higher percentage of Caucasian models for collections with a high level of consistency in models' physical appearance. Collections with a high percentage of models of color indicate more casual design concepts and the promotion of diversity in racial background is considered more effective for street fashion. Second, collections with a high level of consistency in models' physical appearance tend to control various elements that constitute a physical appearance through more detailed planning and stage direction. Third, there is a tendency to reinforce design concepts by creating a consistency in the overall physical appearance of models. This affirms that their physical appearance is determined by brand (i.e. designer) and is used to maximize a design concept delivery. The results of this study suggests that the physical appearance of models must be determined in line with the design concept versus detailed planning that must consider audience perspectives as well as adjust the show's length and the interval between each model appearing on the stage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.252-261
• /
• 1991

A particle trajectory model to simulate two-phase particle-laden crossjets into two-dimensional horizontal free stream has been developed to study the variations of the jet trajectories and velocity variations of the gaseous and the particulate phases. The following conclusions may be drawn from the predicted results, which are in agreement with experimental observations. The penetration of the two-phase jet in a crossflow is greater than that of the single-phase jet. The penetration of particles into the free stream increases with increasing particle size, solids-gas loading ratio and carrier gas to free stream velocity ratio at the jet exit. When the particle size is large, the solid particles separate from the carrier gas , while the particles are completely suspended in the carrier gas for the case of small size particles. As the particle to carrier gas velocity ratio at the jet exit is less than unity, the particles in the vicinity of the jet exit are accelerated by the carrier gas. As the injection angle is increased, the difference of the particle trajectory from that of the pure gas becomes larger. Therefore, it can be concluded that the velocities and trajectories of the particle-laden jets in a crossflow change depending on the solids-gas loading ratio, particle size, carrier gas to free stream velocity ratio and particle to gas velocity ratio at the jet exit.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.238-249
• /
• 2005

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

• Journal of Korea Water Resources Association
• /
• v.43 no.1
• /
• pp.95-104
• /
• 2010

The tap water supply in Korea mainly depends on the surface water. However, the advanced water purification process becomes a necessity due to the deterioration of surface water quality and the risk of accidental spill. High cost of water treatment and public concerns make the decision makers turn to riverbank filtration as an alternative to the surface water. Riverbank filtration has been employed for water supply in many developed countries for more than 150 years. In Korea, riverbank filtration has drawn attention since 1990s as a supply source having potential to stably meet the ever-increasing water demand. Some cities located in the Nakdong River Basin are currently supplying water through riverbank filtration. This work studies the site suitability analysis for riverbank filtration using game theory. Theory of games, which is a branch of applied mathematics used in social sciences (most notably economics), biology, engineering and computer science, was applied to candidate locations for the selection of riverbank filtration site. We proposed a policy game model as a new method adopting a probabilistic approach. The model developed turned out to be an effective tool for site selection.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.246-261
• /
• 2002

The screw loosening is one of the complications that happen frequently in dental implant prostheses. The purpose of this study was to evaluate the changes of reverse/loosening (opening) torque of the screw according to the surface modifications by sandblasting and 24K gold electroplating as well as to determine the possibility of the clinical use of a washer in dental implant. The reverse torque of 4 experimental conditions(control, sandblasted, use of washers, electroplasted) was measured by digital torque gauge (Model MGT50Z, Mark-10 Corp., 458 West John Street Hicksville, NY 11801 USA). Electronic torque controller (Nobel Biocare DEA 020) was used in fastening the gold screws into abutment replicas. Mixed Linear Model Analysis method was used for statistical analysis. To examine the changes of screw thread surface, microphotographs were taken by Olympus PME-3 metallurgic microscope (Olympus Optical Co. Ltd., Tokyo, Japan). Within the limitations of this study, the following results were drawn: 1. The surface modifications of the gold screws and the use of a washer have significantly affected the reverse torque value compared to the control group (P<0.01). 2. Sandblasting and electroplating treatments demonstrated significantly higher reverse torque value than that of control group. 3. The use of a washer may be one of the useful clinical methods that prevent the screw loosening. However, further studies are necessary for the material selection and design of the washer.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.26-39
• /
• 2010

This is a leading study to replace the structural analysis methodology on the specific traditional joint by a numerical analysis. Tests were carried out to test the compressive methodologies with the numerical results. The Japanese larch was used as a sample. The Orthotropic property of wood was specifically considered for the finite element numerical analysis. Linear numerical analysis and non-linear numerical analysis for the BEAM element and the two SOLID elements of ANSYS were used to analyze the compressive performance. In addition, more finely divided elements were used to raise the accuracy of the numerical result. Finally, the statistically significant differences were tested between that of the analytical and numerical results. It could be concluded that the SOLID 64 element shows the most optimum result when the non-linear analysis with the more finely divided element was used. However, finely dividing of the element is a considerable time consuming process, and it is quite difficult to raise the accuracy of the non-linear numerical analysis. Therefore, if considering the vertical displacement to be of the only interest, the BEAM element is more efficient than the SOLID element because the BEAM element is reflected as a simple line, which is less time consuming and difficult in dividing the elements. But, the BEAM element cannot accurately model the knot as a strength defect factor which is an important property in the orthotropic property of wood. Therefore, the SOLID element should be used to model the strength defect factor, knot, as it can be efficiently applied on the structural size flexure member which could be more strongly effected by the knot. In addition, it is useful at times when the failure types of members are to be more closely investigated, as the SOLID element is able to examine the local stress distribution of the member. The conclusion drawn by this study is of the good concordance between analytical results and numerical results of compressive wood members, but how orthotropic properties should only be considered. The numerical analysis on the specific Korean traditional joints will be based on the current study results.