Two-jaw surgery by use of Surgical Jaw Relator

Surgical Jaw Relator를 이용한 양악 수술 치험례

  • Published : 2005.06.01

Abstract

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

악골부조화가 심할수록 기능향상을 위해 악골 및 치아 치조부에서의 보상반응이 현저해진다. 대표적인 현상으로 하악과두의 변위와 상악교합평면의 변화 등을 들 수 있다. 이러한 상하악골에서의 적응성 변화는 안모의 심미성과 교합의 기능 향상을 위해, 술후 안정성을 높이기 위해서 악교정수술을 통해 반드시 수정해야 할 요소이다 적절한 상악골 수술을 위해서 통상적으로 model surgery를 시행하여 왔으나 이의 단점을 보완하기 위해 Surgical Jaw Relator를 고안하였으며 이는 교합기의 mounting plate 대신에 부착함으로써 상하악 모형의 삼차원적 이동과 회전이 가능하도록 설계되어 있으며 기존의 모든 종류(Panadent. Sam, Denar, Hanau 등)의 교합기에 손쉽게 부착하여 수술용 스프린트의 제작 시간을 대폭 줄일 수 있는 장점이 있다 상악골 상방 이동이 필요한 하악전돌 증례와 상악골 하방 이동이 요구되는 하악후퇴 증례 등에 본 기구를 적용한 결과 양호한 수술 결과를 얻었으며, 이로써 정교한 상악 수술을 요하거나 명확한 수술 계획이 설정된 증례 등에서 본 기구를 적절하게 사용할 경우 수술용 스프린트를 효율적으로 제작하는데 다소 도움이 될 것으로 생각된다.

Keywords

References

  1. 양상덕. 교합평면의 교정학적 의미와 설정 방법. 한국악교합.교정연구회지 2001;5:5-38
  2. 양상덕. 악교정수술과 교정치료의 목표. 한국악교합.교정연구회지 2003;6:7-34
  3. Ellis E 3rd. Modified splint design for two-jaw surgery. J Clin Orthod 1982;16:619-22
  4. Ellis E 3rd. Accuracy of model surgery: Evaluation of an old technique and introduction of a new one. J Oral Maxillofac Surg 1990;48:1161-7 https://doi.org/10.1016/0278-2391(90)90532-7
  5. Wong BW. Innovations in orthognathic splint construction. J Clin Orthod 1985;19:750-6
  6. Schwestka-Polly R, Roese D, Kuhnt D, Hille KH. Application of the model-positioning appliance for three-dimensional positioning of the maxilla in cast surgery. Int J Adult Orthodon Orthognath Surg 1993;8:25-31
  7. Yang SD. A new device for surgical splint construction. J Clin Orthod 2004;38:367-72
  8. Kim HS, Kim SY, Lee IS, Kim SC. Compensatory changes of occlusal plane angles in relation to skeletal factors. Korean J Orthod 2004;34:229-40
  9. Wolford LM, Hilliard FW, Dugan DJ. Surgical Treatment Objective. St Louis: Mosby; 1985