• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.131-137
• /
• 2013

The thin insulator films for organic memory device were made by the plasma polymerization method using the styrene monomer which was not the wet process but the dry process. For the formation of stable plasma, we make an effort for controlling the monomer with bubbler and circulator system. The thickness of plasma polymerized styrene insulator layer was 430 nm, the thickness of the Au memory layer was 7 nm thickness of plasma polymerized styrene tunneling layer was 30, 60 nm, the thickness of pentacene active layer was 40 nm, the thickness of source and drain electrodes were 50 nm. The I-V characteristics of fabricated memory device got the hysteresis voltage of 45 V at 40/-40 V double sweep measuring conditions. If it compared with the results of previous paper which was the organic memory with the plasma polymerized MMA insulation thin film, this result was greater than 18 V, the improving ratio is 60%. From the paper, styrene indicated a good charge trapping characteristics better than MMA. In the future, we expect to make the organic memory device with plasma polymerized styrene as the memory thin film.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.63-68
• /
• 2016

This study was performed to assess the microbiological quality of Brassica campestris var. narinosa microgreen from harvesting and processing steps. The samples were analyzed for total viable cell counts (TVC), coliforms, Enterobacteriaceae, Escherichia coli, Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus, Bacillus cereus, and Staphylococcus aureus. The total viable counts of microgreen (whole leaves) and environment samples from harvesting steps were higher than 6.8 log CFU/g and the contamination level of coliforms in the samples were 3.2 log CFU/g and 3.5 log CFU/g of microgreen and soil, respectively. In case of microgreen samples collected from processing steps, the contamination level of TVC and coliforms were higher in raw materials than samples obtained from later stages of processing, i.e. washing, drain, and final products. The contamination levels of B. cereus in raw materials and environments decreased approximately 1.4 log CFU/g in final products. S. aureus was detected in soil samples but Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus and pathogenic E. coli was not detected. In order to identify the sources of contamination for microgreen, the genetic similarity of B. cereus isolates obtained from harvesting and processing steps were compared using the repetitive-sequence-based polymerase chain reaction method. B. cereus isolates obtained from harvesting environments and microgreen were clustered with a similarity greater than 95%. In case of B. cereus isolates obtained from microgreen and environmental samples at processing steps showed low genetic similarity.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.533-549
• /
• 2017

In this study, drainage systems were proposed to drain the leakage of groundwater in the existing underground concrete structures. The system consists of drainage board, wire mesh, fixed nail, and mortar with mineral. In order to increase constructability, the drainage board and wire mesh were attached on the surface of cement concrete using the air nailer and fixed nail. The mortar with 30% of blast furnace slag was sprayed on the drainage board and wire mesh using the spray mortar equipment. The field test construction was carried out in a conventional concrete lining tunnel and concrete retaining wall for performance verification of the drainage system in the field. There was no problem with performance degradation in the drainage system for three years after construction. The bond strength tests were performed on the sprayed mortar at 14 days and about 3 years after field test construction. In case of attaching the wire mesh on the drainage board, the bond strengths of the sprayed mortar were 1.04 MPa at 14 days and 1.46 MPa about 3 years. In case of the drainage board without the wire mesh, the bond strengths of the sprayed mortar were 1.13 MPa at 14 days and 0.89 MPa, less than 1 MPa of bond strength criteria, about 3 years.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.90-97
• /
• 2006

We report our research work on the millimeter-wave broadband amplifier integrating the shunt peaking technology with the cascode configuration. The millimeter-wave broadband cascode amplifier on MIMIC technology was designed and fabricated using $0.1{\mu}m\;{\Gamma}-gate$ GaAs PHEMT, CPW, and passive library. The fabricated PHEMT has shown a transconductance of 346.3 mS/mm, a current gain cut off frequency ($f_T$) of 113 GHz, and a maximum oscillation frequency ($f_{max}$) of 180 GHz. To prevent oscillation of designed cascode amplifier, a parallel resistor and capacitor were connected to drain of common-gate device. For expansion of the bandwidth and flatness of the gain, we inserted the short stub into bias circuits and the compensation transmission line between common-source device and common-gate device, and then their lengths were optimized. Also, the input and output stages were designed using the matching method to obtain the broadband characteristic. From the measurement, we could confirm to extend bandwidth and flat gain by integrating the shunt peaking technology with the cascode configuration. The cascode amplifier shows the broadband characteristic from 19 GHz to 53.5 GHz. Also, the average gain of this amplifier is about 6.5 dB over the bandwidth.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.18-24
• /
• 2002

n this paper, we have fabricated pseudomorphic high electron mobility transistors (PHEMT) with a 0.2 ${\mu}{\textrm}{m}$ wide-head T-shaped gate using electron beam lithography by a dose split method. To make the T-shape gate with gate length of 0.2 ${\mu}{\textrm}{m}$ and gate head size of 1.3 ${\mu}{\textrm}{m}$ we have used triple layer resist structure of PMMA/P(MMA-MAA)/PMMA. The DC characteristics of PHEMT, which has 0.2 ${\mu}{\textrm}{m}$ of gate length, 80 ${\mu}{\textrm}{m}$ of unit gate width and 4 gate fingers, are drain current density of 323 ㎃/mm and maximum transconductance 232 mS/mm at $V_{gs}$ = -1.2V and $V_{ds}$ = 3V. The RF characteristics of the same device are 2.91㏈ of S21 gain and 11.42㏈ of MAG at 40GHz. The current gain cut-off frequency is 63GHz and maximum oscillation frequency is 150GHz, respectively.ively.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.86-92
• /
• 2020

We confirmed the effects on the device performances and the charge injection characteristics of organic field-effect transistor (OFET) by selectively differently controlling the surface energies on the contact region of the substrate where the source/drain electrodes are located and the channel region between the two electrodes. When the surface energies of the channel and contact regions were kept low and increased, respectively, the field-effect mobility of the OFET devices was 0.063 ㎠/V·s, the contact resistance was 132.2 kΩ·cm, and the subthreshold swing was 0.6 V/dec. They are the results of twice and 30 times improvements compared to the pristine FET device, respectively. As the results of analyzing the interfacial trap density according to the channel length, a major reason of the improved device performances could be anticipated that the pi-pi overlapping direction of polymer semiconductor molecules and the charge injection pathway from electrode is coincided by selective surface treatment in the contact region, which finally induces the decreases of the charge trap density in the polymer semiconducting film. The selective surface treatment method for the contact region between the electrode and the polymer semiconductor used in this study has the potential to maximize the electrical performances of organic electronics by being utilized with various existing processes to lower the interface resistance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.697-704
• /
• 1995

This experiment was carried out to elucidate the effect of the midsummer drainage times and some growth regulators on lodging characters, lodging and yield in puddled-soil drill seeding in rice. Dongjinbyeo, the mid-late maturing rice variety was seeded at May 11 by seeding machine with 4cm of furrow depth. Experimental plots were divided two main treatment without midsummer drain and two time drains (30 and 50 days after seeding), Inabenfide(IBF) was applied 40days before heading(DBH) and IBP was applied at 30DBH, respectively. Culm length was shorten, the wall of N$_4$ was thicken, and the breaking weight was increased at two time drainage and growth regulators applied in order of Inabenfide, IBP, and Control. Lodging wasn't occurred at two time drainage but it was occurred at none drainage in the order of Control, IBP, and Inabenfide applied. Yield was higher at two time drainage compared with none drainage and higher in order of Inabenfide, IBP and Control in none drainage but wasn't significantly different among growth regulators applied in two time drainage. Therefore, two times midsummer soil drying is recommendable management method for puddled -soil drill seeding of rice. Rice, Direct seeding, Puddled-soil, Drill seeding, Midsummer drainage, Growth regulator, Lodging.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.821-832
• /
• 1998

This study investigates the prediction of daily water supply, which is a necessary for the efficient management of water distribution system. Fuzzy neuron, namely artificial intelligence, is a neural network into which fuzzy information is inputted and then processed. In this study, daily water supply was predicted through an adaptive learning method by which a membership function and fuzzy rules were adapted for daily water supply prediction. This study was investigated methods for predicting water supply based on data about the amount of water supplied to the city of Kwangju. For variables choice, four analyses of input data were conducted: correlation analysis, autocorrelation analysis, partial autocorrelation analysis, and cross-correlation analysis. Input variables were (a) the amount of water supplied (b) the mean temperature, and (c)the population of the area supplied with water. Variables were combined in an integrated model. Data of the amount of daily water supply only was modelled and its validity was verified in the case that the meteorological office of weather forecast is not always reliable. Proposed models include accidental cases such as a suspension of water supply. The maximum error rate between the estimation of the model and the actual measurement was 18.35% and the average error was lower than 2.36%. The model is expected to be a real-time estimation of the operational control of water works and water/drain pipes.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.11-19
• /
• 2009

Recently the problem of global environment is became by social issue. Accordingly the interests to recycling and saving of resources are growing from daily life to varieties field of industry. To preserve the global environment, prevent global warming, environmental destruction, environmental pollution by wastes, the drain of aggregate, plasticity energy of cement and decrease in carbon dioxide are an urgent problem that must be resolved. So there is to a field of building industry and stands but on the inside of the building the many double meaning resources usefully, applies. Also the seller masterpiece building where the service life is long planned is safe and comfortably, maintenance, suppresses the construction which is not necessary is unnecessary. Also the seller masterpiece building where the service life is long planned is safe and comfortably, maintenance, suppresses the construction which is not necessary is unnecessary. By revitalizing effective use of limited earth resources, recycling and controling production of construction waste, this study introduced to a method for Long-Term Durability of Construction Structure and Effective Use of Technology for Construction Waste considering architectural demand and earth environment. It is for reduction of an earth environment load from the side of construction production and performance design of a structure.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.409-414
• /
• 2010

The first drainage time in a day was controlled for precise irrigation management with low consumption of nutrient solution in tomato perlite bag culture system by measuring water level of drained water in drainage catchment part. This method automatically adjusted the irrigation time under any condition of light, temperature and humidity, resulting in stable water content in substrates. However, it was difficult to keep the time consistent as they were set. It drained with the deviation of 20 min in the treatment in which the first drainage time was set at 10:00 and 50 min in the treatment set at 10:30. The first drainage time was not constant, but the drain occurred stably before noon in the treatment of which irrigation frequency was longer than 30 min. The drainage ratio was better balanced in all the treatments using drainage level sensors than the treatment using time clock for irrigation control. High water and fertilizer efficiencies were obtained. Although the growth, total yield and sugar content were not significantly different between the treatments, fruit weight was higher in the treatments using drainage level sensors than that using timer.