• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1619-1626
• /
• 2018

The output power of most facilities for renewable energy generation is unstable due to external environmental conditions. In distributed power systems with two or more sources, a stable output can be achieved with the complementary power supply among the different input sources. In this paper, a double-input DC-DC converter with a wide-input-voltage-range is proposed for renewable energy generation. This converter has the following advantages: the circuit is simple, and the input voltage range is wide and the fault tolerance is excellent. The operation modes and the steady-state analysis are examined. Finally, experimental results are illustrated to verify the correctness of the analysis and the feasibility of the proposed converter.

• 공업화학
• /
• 제7권1호
• /
• pp.18-25
• /
• 1996

교반소요동력은 장치의 설계상 중요할 뿐만 아니라 교반 프로세스를 평가, 검토하는 데 매우 중요하다. 특히 실험실 레벨에서 플랜트로의 스케일업은 주로 동력기준으로 행해지기 때문에 장치형상의 선택과 동력의 설정이 교반효과를 결정한다. 따라서 본 연구에서는 난류역 완전방해판 조건하에서 경사 임펠러 및 2단 패들 임펠러의 적절한 동력상관식을 제시한다. $$Np_{(pitch)}=({\theta}/90^{\circ})Np_{(90^{\circ})}$$ 또한 임펠러 사이의 거리에 따른 동력수의 추산식을 제시한다. $$Np=7.09(n_p)^{0.7}(\frac{b_(double)}{d})(\frac{H}{D})^{0.18}$$, $${n_p}^{0.7}(\frac{b_{(double)}}d)$$<2 $$Np=8.73\{(n_p)^{0.7}(\frac{b_{(double)}}{d})\}^{0.7}(\frac{H}{D})^{0.18}$$, $${n_p}^{0.7}(\frac{b_{(double)}}d)$$>2.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.23-32
• /
• 2022

Pyroprocessing is a promising technology for managing spent nuclear fuel. The nuclear material accounting of feed material is a challenging issue in safeguarding pyroprocessing facilities. The input material in pyroprocessing is in a solid-state, unlike the solution state in an input accountability tank used in conventional wet-type reprocessing. To reduce the uncertainty of the input material accounting, a double-stage homogenization process is proposed in considering the process throughput, remote controllability, and remote maintenance of an engineering-scale pyroprocessing facility. This study tests two types of mixing equipment in the proposed double-stage homogenization process using surrogate materials. The expected heterogeneity and accounting uncertainty of Pu are calculated based on the surrogate test results. The heterogeneity of Pu was 0.584% obtained from Pressurized Water Reactor (PWR) spent fuel of 59 WGd/tU when the relative standard deviation of the mass ratio, tested from the surrogate powder, is 1%. The uncertainty of the Pu accounting can be lower than 1% when the uncertainty of the spent fuel mass charged into the first mixers is 2%, and the uncertainty of the first sampling mass is 5%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.248-252
• /
• 2001

A noble single-ended input, double-balanced mixer topology is proposed. The mixer incorporates the common-source amplifier input stage with inductive degeneration for impedance matching. The analysis based on simulations shows that the overall performance of the mixer is excellent and is adjustable by varying the input transistor size to give best characteristics for the given linearity specifications.

• 한국ITS학회 논문지
• /
• 제15권4호
• /
• pp.143-152
• /
• 2016

본 논문에서는 이동통신대역에 사용 가능한 MMIC(Monolithic Microwave Integrated Circuits) 이중평형 주파수 혼합기(Double Balanced Mixer)를 설계하고 LO 전력 최적화에 관한 연구를 다룬다. 본 논문에서 제안한 MMIC 이중평형 주파수 혼합기의 칩 크기는 $4{\times}4$[$mm^2$]이며, GaAs 기판을 사용한다. LO power에 대한 최적화 연구는 입력신호의 선형성에 대한 Input IP3(IIP3)에 대해서 진행하며, LO power+16 dBm을 인가했을 때 IIP3성분이 약 23.2dBm을 보여 가장 우수한 특성을 나타내었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.471-473
• /
• 2009

본 논문에서는 핸즈프리 전화통신을 위한 동시통화(double-talk) 및 잡음에 강건한 반향제거 시스템을 제안한다. 제안하는 반향제거 시스템은 동시통화 상황을 판별하기 위해 마이크 입력신호와 추정한 마이크 입력신호의 분산을 기반으로한 동시통화 검출 알고리즘을 사용하고 반향 경로 추정을 위한 적응 필터는 잔여반향 오차 전력과 AP 알고리즘의 투영차수를 곱하여 입력 신호의 자기공분산 행렬에 더해 정규화시킨 알고리즘을 적용한다. 컴퓨터 시뮬레이션을 통한 동시통화 및 주변 잡음이 큰 핸즈프리 환경에서 제안하는 방법이 AIC(acoustic interference cancellation) 측면에서 우수함을 보인다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.925-935
• /
• 2016

This paper proposes a new interleaved double-input three-level Boost (DITLB) converter, which is composed of two boost converters indirectly in series. Thus, a high voltage gain, together with a low component stress and a small input current ripple due to the interleaved control scheme, is achieved. The operating principle of the DITLB converter under the individual supplying power (ISP) and simultaneous supplying power (SSP) mode is analyzed. In addition, closed-loop control strategies composed of a voltage-current loop and a voltage-balance loop, have been researched to make the converter operate steadily and to alleviate the neutral-point imbalance issue. Experimental results verify correctness and feasibility of the proposed topology and control strategies.

• 드라이브 ㆍ 컨트롤
• /
• 제13권3호
• /
• pp.24-31
• /
• 2016

The performance characteristics of a dynamic control system are evaluated according to the transient and steady-state responses. The transient performance is the controllability of the output for the tracking of the reference or the ability to reduce or reject the effects of unwanted disturbances; alternatively, the steady-state performance is represented by the magnitude of the control error at the steady state. As the effects of the two performances on each other are reciprocal, a controller design that shows a zero steady-state error for the ramp input is uncommon because of the challenge regarding the achievement of an acceptable transient response. This paper proposes a PI+double-integral controller for the elimination of the steady-state error for the ramp input while a sound transient performance is maintained. The control-gain design procedure is described by the second-order response for the step input and the response of the error dynamics for the ramp input. The PI+double-integral controller is designed for the first-order transfer function that is derived from a system identification with the open-loop experiment data of the dc-motor. The simple structure of the proposed controller enables the adoption of a low-end microcontroller for the implementation of a real-time control. The experiment results show that the control performance is as effective as that of the simulation analysis for the operating point of linear system; furthermore, the PI+double-integral controller can be conveniently applied to the control system, which is desirable for the improvement of the steady-state error.

• 한국음향학회지
• /
• 제14권3호
• /
• pp.28-36
• /
• 1995

본 논문에서는 능동소음제어를 위하여 망각형 지연 LMS(least mean square) 알고리듬을 이용한 이중루프제어 모델을 제안하였다. 제안한 이중루푸제어 모델은 계산양을 줄이기 위해 이득과 음향시간지연인자를 이용하여 온라인으로 라우드스피커 특성 및 오차음경로를 추정한다. 이중루프구조를 통한 오차신호의 제어는 보다 견실한 제어시스템이 된다. 음향시간지연을 추정하기 위한 필터의 입력신호는 입력 마이크로폰 신호와 적응필터의 차를 사용한다. 망각형 지연 LMS 알고리듬은 비정상상태에서 계수들의 발산을 방지하기 위해 사용한다. 실제 소음신호에 대하여 제안한 이중루프제어 모델은 소음레벨이 평균 12.9dB정도 감쇠되었다.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.655-661
• /
• 2011

This paper presents two topologies for single-stage single-phase double-buck type PFC converters, designed to operate at high power factor, near sinusoidal input currents and adjustable output voltage. Unlike the known buck type PFC topologies, in which the output voltage is always lower than the maximum input voltage, the proposed converters can operate at output voltages higher than the ac input peak voltage. A reduced number of switches on the main path of the current are another characteristic of the two proposed topologies. To shape the input line currents, a fast and robust controller based on a sliding mode approach is proposed. This active non-linear control strategy, applied to these converters allows high quality input currents. A Proportional Integral (PI) controller is adopted to regulate the output voltage of the converters. This external voltage controller modulates the amplitude of the sinusoidal input current references. The performances of the presented rectifiers are verified with experimental results.