• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.33-37
• /
• 2017

To protect the power systems from fault current, the rated protective equipment should be installed. However growth of power system scale and concentration of loads caused the large fault current in power transmission system and distribution system. The capacities of installed protective equipment have been exceeded the due to increase of fault current. This increase is not temporary phenomenon but will be steadily as long as the industry develops. The power system operator need a counter-measurement for safety, so superconducting fault current limiter (SFCL) has been received attention as effective solutions to reduce the fault current. For the above reasons various type SFCLs have been studied recently. In this paper, operation characteristics and power burden of trigger type SFCL is studied. The trigger type SFCL has been used for real system research in many countries. Another trigger type SFCL (double quench trigger type SFCL) is also studied. For this paper, short circuit test is performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1386-1392
• /
• 2009

In this paper, we have developed the test equipment to measure performance of oscillator using Double Side Edge Trigger(DSET). This DSET increases counting number of micro pulse by frequency counter, which will successfully reduce the half measuring time to comparison with the existing counter by using DSET. This new concept of performance measuring equipment provides a high productivity and performance improvement.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.38-42
• /
• 2019

To protect the power systems from fault current, the rated protective equipment should be installed. However growth of power system scale and concentration of loads caused the large fault current in power transmission system and distribution system. And capacities of installed protective equipment have been exceeded the due to increase of fault current. This increase is not temporary phenomenon but will be steadily as long as the industry develops. The power system need a counter measurement for safety, so superconducting fault current limiter (SFCL) has been received attention as an effective solutions to reduce the fault current. For the above reasons various type SFCL is studied recently. In this paper, the operational characteristics and power burden of trigger type SFCL is studied. The trigger type SFCL has been used for real system research in many countries. And another trigger type SFCL (double quench trigger type SFCL) is also studied. For this paper, short circuit test is performed.

• International Journal of Contents
• /
• v.7 no.2
• /
• pp.59-63
• /
• 2011

The aim of our study was to evaluate the immediate effects of an 830-nm Aluminium gallium arsenide (GaAlAs) laser, by examining the changes, in pressure-pain threshold (PPT) and tenderness at 3 kg of the myofascial trigger point (MTrP) of the upper trapezius muscle in visual display terminal (VDT) workers in comparison with placebo treatment. Thirty VDT workers (13 males, 17 females) with complaints of upper trapezius muscle were recruited. All participants were given either active GaAlAs laser (830 nm wavelength, 450 mW, 9 J at point) or placebo GaAlAs laser, according to the double-blinded and placebo-controlled trial. Both active and placebo low-level laser therapy (LLLT) treatments showed no significant effect on PPT and tenderness at 3 kg. These results suggest that a higher dosage may be necessary to produce immediate effects when applying LLLT to the MTrP of relatively large muscles such as the upper trapezius muscle.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.280-284
• /
• 2021

In this paper, a new ESD protection circuit is proposed to improve the snapback characteristics. The proposed a new structure ESD protection circuit applying the conventional SCR structural change and stack structure. The electrical characteristics of the structure using penta-well and double trigger were analyzed, and the trigger voltage and holding voltage were improved by applying the stack structure. The electron current and total current flow were analyzed through the TCAD simulation. The characteristics of the latch-up immunity and excellent snapback characteristics were confirmed. The electrical characteristics of the proposed ESD protection circuit were analyzed through HBM modeling after forming a structure through TCAD simulator.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.159-164
• /
• 2010

We experiment to analyze on current limiting and recovery characteristics of trigger type SFCL as the composition of the contact. Generally, some superconductor of SFCL is relatively largely loaded due to limit the fault current by oneself and recovery time is affected until the fault cleared. However, in the fault, the proposal trigger type SFCL transfer the fault current to current limiting reactor(CLR) using power switch so it could reduce the recovery time and load of the superconductor. However, because of applying the additional power switches, that could generate some power loss. Therefore, to solve this problem, we proposed the composition method of the double contact for a trigger type SFCL and analyzed on current limiting and recovery characteristics for ones.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.285-290
• /
• 2007

A wavelength-demodulation algorithm for FBG sensor is proposed by using a double-pass Mach-Zehnder interferometer. Zero-crossing points of double-passed interference signal are used to trigger the accurate $90^{\circ}C$ phase difference positions in the sensor signal, which is an essential condition in the subsequent arctangent and phase unwrapping signal processing. With the proposed method, we could efficiently measure various measurands, such as dynamic-, static-strain, and temperature, and ${\sim}8pm$ of wavelength resolution was obtained.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.2
• /
• pp.55-59
• /
• 2004

Throughout manufacturing processes, pulse shaping is required for material processing and it is regarded as an important (actor according to the specific characteristics of materials. Therefore, this study suggests a highly appropriate pulse shaping technique using a multi-switching method. This is a pulse superposition method in which one flash lamp can consecutively turn on by the double switching of the discharging system. It is possible to construct a variety of pulse shapes and pulse widths by the consecutive trigger of the silicon-controlled rectifiers (SCR) of a PIC (program integrated circuit) one-chip microprocessor. The use of this technique can provide a number of advantages to people who require suitable pulse shaping for particular applications such as welding, cutting, and drilling.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.83.3-83.3
• /
• 2015

During a six-month period (autumn 2014 within the framework of a research & education project) we have constructed a professional double-station video-meteor detection network at the SOAO and BOAO mountain summits. Meteor detection is achieved by pixel-to-pixel motion-detection trigger. Each station is nearly autonomous and has three cameras with fixed viewing angles monitoring part of the night-sky over Korea. Various field of views are in use for testing purpose and captured video-meteor data is automatically transferred to a central FTP server on a nightly basis. Data is publicly available. The network has been operational since September 2014 and could serve as a prototype system for a more extended national network for meteor/fireball monitoring and detection in Korean airspace. We will report on the network construction, technical setup and present first results of detected meteors and fireballs. Further information: Meteors@KASI: http://meteor.kasi.re.kr.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.62.2-63
• /
• 2015

During a six-month period (autumn 2014 within the framework of a research & education project) we have constructed a professional double-station video-meteor detection network at the SOAO and BOAO mountain summits. Meteor detection is achieved by pixel-to-pixel motion-detection trigger. Each station is nearly autonomous and has three cameras with fixed viewing angles monitoring part of the night-sky over Korea. Various field of views are in use for testing purpose and captured video-meteor data is automatically transferred to a central FTP server on a nightly basis. Data is publicly available. The network has been operational since September 2014 and could serve as a prototype system for a more extended national network for meteor/fireball monitoring and detection in Korean airspace. We will report on the network construction, technical setup and present first results of detected meteors and fireballs. Further information: Meteors@KASI: http://meteor.kasi.re.kr.