• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.6-10
• /
• 2009

본 논문에서는 혼합소스(mixed-source) HVPE(hydride vapor phase epitaxy)방법으로 선택성장(SAC: selective area growth) GaN/AlGaN 이종접합구조의 발광다이오드를 r-plane 사파이어 기판 위에 제작하였다. SAG-GaN/AlGaN DH(double heterostructure)는 고온 GaN 버퍼층, Te 도핑된 AlGaN n-클래딩층. Gan 활성층. Mg 도핑된 AlGaN p-클래딩층. Mg 도핑된 GaN p-캡층으로 구성되어있다. GaN/AlGaN 이종접합구조의 발광다이오드의 특성을 알아보기 위해 SEM을 통한 구조적 분석과 전류-전압 측정(I-V: current-voltage measurement), 전류-광출력(EL: electroluminescence) 측정을 통하여 전기적, 광학적 특성을 평가하였다.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.365-371
• /
• 2018

1D core-shell nanostructures have attracted great attention due to their enhanced physical and chemical properties. Specifically, oriented single-crystalline $TiO_2$ nanorods or nanowires on a transparent conductive substrate would be more desirable as the building core backbone. However, a facile approach to produce such structure-based hybrids is highly demanded. In this study, a three-step hydrothermal method was developed to grow NiMn-layered double hydroxide-decorated $TiO_2$/carbon core-shell nanorod arrays on transparent conductive fluorine-doped tin oxide (FTO) substrates. XRD, SEM, TEM, XPS and Raman were used to analyze the obtained samples. The in-situ fabricated hybrid nanostructured materials are expected to be applicable for photoelectrode working in water splitting.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.9-11
• /
• 2000

To increase the device linearities and the breakdown-voltages of FETs, Al$\sub$0.25/ Ga$\sub$0.75/AS / In$\sub$0.25/Ga$\sub$0.75/As / Partially doped channel FET(DCFET) structures are proposed. The metal- insulator -semiconductor (MIS) like structures show the high gate-drain breakdown voltage(-20 V) and high linearities. The devices showed the small ripple of the current cut-off frequency and the power cut-off frequency over the wide bias range.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.118-118
• /
• 2000

We investigate Frohlich-like electron--optical-phonon interactionsin uniaxial crytals based on the macroscopic dielectric continuum model. In general, the optical-phonon branches support mixed longitudinal and transverse modes due to the anisotropy. For heterostructures with double interfaces and superlattices, it is known that confined, interface, and half-space optical phonon modes exist in zincblende cystals. In uniaxial structures, additional propagating modes may exist in wurtzite heterosystems due to anisotropic phonon dispersion. This is especially the case when the dielectric properties of the adjacent heterostructure materials do not differ substantially. The dispersion relations and the interaction Hamiltonians for each of these modes are derived.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.342-354
• /
• 2013

The aim of this work is to investigate and study the quantum effects in the modeling of nanoscale symmetric double-gate InAlAs/InGaAs/InP HEMT (High Electron Mobility Transistor). In order to do so, the carrier concentration in InGaAs channel at gate lengths ($L_g$) 100 nm and 50 nm, are modelled by a density gradient model or quantum moments model. The simulated results obtained from the quantum moments model are compared with the available experimental results to show the accuracy and also with a semi-classical model to show the need for quantum modeling. Quantum modeling shows major variation in electron concentration profiles and affects the device characteristics. The two triangular quantum wells predicted by the semi-classical model seem to vanish in the quantum model as bulk inversion takes place. The quantum effects thus become essential to incorporate in nanoscale heterostructure device modeling.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.1135-1142
• /
• 2000

본 연구에서는 <1.55um 대역의 편광비의존성을 가지는 반도체 광증폭기를 제작하기 위하여 InGaAsP/InP 이중이종접합 웨이퍼를 이용하여 정방매립형 반도체 광증폭기(SOA)를 제작하였다. 제작된 반도체 광증폭기의 특성을 측정한 결과 3㏈대역폭은 35nm이었으며, 3dB포화출력은 4dBm이었다. ISOmA의 CW구동에서 최대이득은 19.4dB이었다. 반도체 광증폭기의 ASE power를 ASE측정시스템을 이용하여 TE, TM모드에 대하여 측정한 결과 최대이득을 나타내는 영역부근에서 TE 및 TM모드의 분포가 거의 일치하였다. 따라서 본 연구에서 제작된 반도체 광증폭기는 비편광의존성 SOA임을 실험적으로 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.235-238
• /
• 1996

An inverted double channel AIGaAs/lnGaAs/GaAs heterostructure grown by LP-MOCVD is demonstrated and discussed. Sheet carrier densities in excess of $4.5{\times}10^{12}cm^{-2}$ at 300K are obtained with a hall mobility of $5010cm^2/V{\cdot}s$. The proposed device with a $1.8{\times}200{\mu}m^2$ gate dimension reveals an extrinsic transconductance as high as 320 mS/mm and a saturation current density as high as 820 mA/mm at 300K. This is the highest current density ever reported for GaAs MODFET's with the same gate length. Significantly improvements on gate voltage swing (up to 3.5 V) and on reverse breakdown voltage (-10V) are demonstrated due to inverted structure.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.17-28
• /
• 1995

In this paper, we developed a two-dimensional numerical simulator which could analyze the stripe geometry semiconductor laser diodes by modifying the commercial semiconductor device simulator, MEDICI. In order to study the characteristics of semiconductor laser diodes, it is necessary to solve the Helmholtz wave equation and photon rate equation in addition to the basic semiconductor equations. Also the recombination rates due to the spontaneous and the stimulated emissions should be included, which are very important recombination mechanisms in semiconductor laser diodes. Therefore, we included the solution routines which analyzed the Helmholtz wave equation and the photon rate equation and two important recombination rates to simulate the semiconductor laser diodes. Then we simulated the gain-guiding and index-guiding DH(Double Heterostructure) semiconductor laser diodes to verify the validity of the implemented functions. The results obtained from simulation are well consistent with the previously published ones. This allows us to know the operating characteristics of DH laser diodes and is expected to use as a tool for optimum design.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.47-49
• /
• 1995

We report the spectroscopic properties of column-III nitrifies of GaN, GaInN, and AlGaN. The column-III nitride semiconductors are promising materials to realize the current-injection-type blue-and ultraviolet (UV)-light-emitting devices with high performance. To acheive the lasing with low threshold, the devices are must constructed to double heterostructure by succesive epitaxial growth technique, and we must confine the carriers in the potential barrier and optical confinement in wave guide between barrier and active layers has different refractive index. The refractive index of column-III nitride semiconductors, however, are rarely reported. The measured refractive index was 2.9, and the observed characteristic peak near the enrgy gap was analysed using a dielectric function and may due to excitonic contribution.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.159-165
• /
• 1995

A double-heterostructure mesa-stripe-geometry laser diode integrated with thermoelectric Peltier cooler has been designed and fabricated. Epi-layers have been grown by metal organic chemical vapor deposition(MOCVD) method. Peltier cooling effect has been measured for devices with a mesa width of 14$\mu$m and a cavity length of 380$\mu$m. The effects of thermoelectric cooling could be shown by measuring the optical output of the laser with the increase of the current in the thermoelectric cooler. While the input courrent of the laser was maintained at 250mA, the optical output was decreased from 4.8mW to 3.8mW due to heating, but with the thermoelectric cooler on the optical output power was recovered by more than 40%. The results show that the complicated cooling device is not needed since the cooling can be achevied by the developement of the fabrication processing.