• Journal of the Korean housing association
• /
• v.23 no.1
• /
• pp.79-88
• /
• 2012

The purpose of this study is to determine the personalizing characteristics of detached housing that reflect the housing needs according to the residents' participation in the back-to-countryside community village. For this study, 15 households of Jagun-maul at Namwon in Jeonbuk provided responses to the semi-structured questionnaire on housing consciousness, housing needs, and views on lifestyle. In addition, 15 plans were analyzed about the shape of the plan, the composition of LDK, the type of access, and the type of special space. The results were as follows. 1) The number of households under the elementary education stage was larger than the number of households above the middle education stage. Most of the households revealed the housing consciousness of 'house as resting place'. Households under the elementary education stage showed a housing consciousness for family-oriented life and households above the middle education stage showed a housing consciousness to interact with neighbors. 2) Households under the elementary education stage preferred LK style while households above the middle education stage preferred LDK style. Most of the floor plans had a front entrance and sliding door for the access from living room to garden. 3) Special spaces such as a loft, 'Ondolbang' (room with underfloor heating), study, maru, 'Toenmaru' (narrow wooden porch), family room, workroom, and toilet with outside door were arranged on each floor plan.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.241-243
• /
• 2016

In the Past, Trend of car security was Physical Something like doorlock system, and The Generation did not have skills connecting External devices. Through Car Development is up, that trend of car security Changed Physical Security to Intelligence Security. This Changes give a chance to hackers to attack this system. This System use CAN(Controller Area Network) Protocol which have three vulnerabilities. First, ID Spoofing, Twice, D - Dos Attack, Third, Android Application Injected Modern cars have many ECU(Electronic Control Unit) to control devices like Engine ON/OFF, Door Lock Handling, and Controlling Handle. Because CAN Protocol spread signal using broadcast, Hackers can get the signal very easily, and Those often use Mobile devices like Android or IOS to attack this system. if bluetooth signal is spread wide, hackers get the signal, and analysis the bluetooth data, so then They makes certain data to attack ECU, they send the data to ECU, and control ECU installed car. so I suggest that I will prevent this attack to make Auth system and prevent this attack in end of Android.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.341-350
• /
• 2013

For this study, a series of interviews with engineers in the Korean construction industry was carried out through a formal workshop format to analyze the causes of the inferior quality of builders' hardware. The authors established the causes of defects in window hardware construction in relation to the three aspects of system, design, and construction as involving the following seven factors: lack of system (including low ability to create construction specifications); low social awareness of the importance of window hardware; low technical capability to create design drawings; low design costs; small manufacturing capacity; low construction cost; and short duration of construction. Among the seven causes, the biggest cause of defects in window hardware construction is the lack of a system (low ability to create construction specifications), followed by low technical capability to create design drawings. In addition, this study carried out basic research to create measures to prevent defects in window hardware construction by analyzing how such causes of defects are distributed depending on the scale of architectural firms and construction companies during actual projects.

• Journal of the Korean housing association
• /
• v.17 no.4
• /
• pp.47-55
• /
• 2006

As a new way of stabilizing the housing for the urban poor, the Korean government proposed 'Dagagu' Housing Purchase and Public Rental Program (DPPRP) and implemented a pilot program in 2004. The purpose of this study was to find out whether DPPRP could be an alternative measure to solve the housing problems facing the urban poor. Physical aspects and community conditions of 'Dagagu' housing purchased by the government will be evaluated. The changes in the tenants' perception of the quality of housing after moving in the current dwellings will be studied. 46 households were temporarily selected, who moved in the purchased public rental housing in 5 districts (DPPRP pilot area). And among them, 32 households were designated as the final subjects, which could do the interview. The surveyors made door-to-door visits to tenants' houses and conducted in-depth interview by using a questionnaire The effects of 'Dagagu' Housing Purchase and Public Rental Program can be summarized according to housing environment aspects and economic aspects as follows: After moving in the public rental housing, the respondents saw improvements in overall housing environment and were satisfied with the current housing. According to a survey on the rental fee before and after moving in public rental housing, the rental fee of the latter had greatly declined. Given that the quality of previous housing was inferior to the current housing, the lessened rental burden was very meaningful.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.650-657
• /
• 2012

An effective dual-mode camera system(a passive wide-angle camera and a pan-tilt-zoom camera) is proposed in order to improve the performance of visual surveillance. The fixed wide-angle camera is used to monitor large open areas, but the moving objects on the images are too small to view in detail. And, the PTZ camera is capable of increasing the monitoring area and enhancing the image quality by tracking and zooming in on a specific moving target. However, its FOV (Field of View) is limited when zooming in on a specific target. Therefore, the cooperation of wide-angle and PTZ cameras is complementary. In this paper, we propose an automatic initial set-up algorithm and coordinate transform method from the wide-angle camera coordinate to the PTZ one, which are necessary to achieve the cooperation. The automatic initial set-up algorithm is able to synchronize the views of two cameras. When a moving object appears on the image plane of a wide-angle camera after the initial set-up positioning, the obtained values of the wide-angle camera should be transformed to the PTZ values based on the coordinate transform method. We also develope the PTZ control method. Various in-door and out-door experiments show that the proposed dual-camera system is feasible for the effective visual surveillance.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.5
• /
• pp.319-326
• /
• 2012

Han-green building is one of the modernized Korean traditional buildings developed by Korea Forest Research Institute. This building was developed to increase the competitiveness of Korean traditional building using state-of-art technologies; hence Han-green building has the inherent characteristics of traditional building such as exposed wood frame in wall. Because of discontinuity in wall by the exposed wood frame, there is a concern on heat-air leaking in terms of energy performance. In this study, air-tightness of Han-green building was evaluated to investigate the influence of gaps between frames and in-fill walls. Blower door test was carried out to evaluate the air-tightness, and air-change rate (ACH50) was evaluated by averaging four set of pressurization and depressurization test. The air-change rate of Han-green house was 5.91 $h^{-1}$. To improve energy performance of Han-green house, thermal infrared images of Han-green house were taken in winter with heating to find out where the heat loss occurred. It was found that the building lost more heat through gaps between frames and in-fill walls rather than through other parts of this building. After covering all the gaps by taping, the blower door test was performed again, and the air-change rate was improved to 5.25 $h^{-1}$. From this analysis, it was concluded that the heated air can leak through the gaps between frames and walls. Therefore, when one designs the post and beam building with exposed frame, the detail design between frame and wall needs to be carefully dealt. However, Han-green building showed relatively high air-tightness comparing with other country research results.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.50-57
• /
• 2006

The purpose of this study is to scrutinize Internet sites which recently promote and sell Hanbok products online and to compare and analyze the formation and management conditions of those by types. One hundred thirty well-known Internet sites related to Hanbok products were studied on the formation and management conditions. The elements of Hanbok products, sales, promotion, and customer service were also discussed as details. In this study, those Internet sites were divided into six categories; private Hanbok designer sites, famous Hanbok brand sites, Hanbok specialized shopping mall sites, Hanbok rental sites, general and specialized Hanbok sites, and Hanbok information sites. The results of this study are as follows. First, the sites of private Hanbok designers and famous Hanbok brands are un for the purpose of promoting rather than selling its products. Second, the object of operating Hanbok specialized shopping mall sites is to sell its products via the Internet with practical Hanbok and kids Hanbok as the central items. These sites are fairly well organized. They show various items and provide information on descriptions, prices, and sizes of its products and offer customer service for sales. Third, custom-made Hanbok is also available alongside of Hanbok rentals on Hanbok rental sites. There are two kinds of rentals, door-to-door rental and online rental and customers normally rent traditional Hanbok for their needs. Fourth, products are sold in the order of kids Hanbok, practical Hanbok, Hanbok accessories, and traditional Hanbok on the general and specialized Hanbok sites. Finally, Hanbok information sites furnish various information on Hanbok and provide link services through making partnerships with other Hanbok cooperations.

• Korean Institute of Interior Design Journal
• /
• v.24 no.3
• /
• pp.38-47
• /
• 2015

This study evaluated non-liturgical space of catholic churches based on the four principles of universal design; accessible design, supportive design, safety-oriented design, and adaptable design. To design those spaces in terms of supportive design principle, diaper exchanging station needs to be placed in the restroom. Findings of this study are as follows: In terms of accessible design, valid width of entrance door to each room(more than 800mm), installation of elevator, height of riser in the stair, and width of step board were appropriate, but there were many spaces where door sils were not removed. In terms of supportive design, notice board at teacher's room and installation of storage closet, and width of passage to office(more than 1,200mm) were also appropriate, but storage closet at a meeting and prayer room, and space for storing flowers appeared inappropriate. To design those spaces in terms of supportive design principle, diaper exchanging station needs to be placed in the restroom. In terms of safety-oriented design, installation of round-edged furniture, use of non-slip flooring material, installation of safety emergency bell at a restroom, and installation of wall handle were required. In terms of adaptable design, space for wheelchair users at each room, installation of the furniture that can adjust the height, installation of desk with different height at an office, installation of toilet and basin considering children were considered to be necessary.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.4
• /
• pp.55-65
• /
• 2012

Urban traditional housing is a type of the urban housing which have developed by itself from the traditional vernacular houses and it has continued with a traditional feature in the westernization and modernization affection of Korea. Also, the urban traditional housing is still one of the housing in the present and it makes a urban village with a rich culture benefit and fresh natural environment. The purpose of this study is to analyze the periodical characteristics of urban traditional house in korea's provincial town Gyeongju. The local range is Hwang-Nam Hanok Conservation Area in Gyeongju and the period range is 1874~2000s. So the first period from 1874 to 1909, the second period is 1910 to 1945, the third period is 1946 to 1969, the fourth period is 1970s, and the fifth period is since the 1980s. This classification will be considered of the social phenomenon at the time. The total number of target houses are 8 houses. They were analyzed by layout, floor plan, and elevation characteristics of urban traditional house. For structure of this study, Chapter 1, establishes the goal and range of study. Chapter 2, 3, examines distinctions of urban traditional house with traditional house, and meaning of urban traditional house, and transition of urban traditional house. Chapter 4, establishes formality to analysis, and performed from plan to elevation analysis, observation survey, and interview through door-to-door survey, and clarifies trend and characteristic of urban traditional house's change by integrating the results, and Chapter 5, is results integrating the above studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.756-760
• /
• 2017

Meeting the growing demand deadlines, reducing the production cost and upgrading the quality control measurements are the reasons why the automotive part manufacturers are venturing into automation. Attaining these objectives is impossible with human inspection for many reasons. Accordingly, the introduction of inspection system purposely for door hinge bracket inspection is presented in this study as an alternative for human inspection. This proposal is designed to meet the demands, features and specifications of door hinge bracket manufacturing companies in striving for increased throughput of better quality. To improve demerits of this manual operation, inspection system is introduced. As the inspection algorithm, template matching algorithm is applied to distinguish the articles of good quality and the poorly made articles. Through the verification test of the inspection process algorithm and the similarity metric matching algorithm, the detection accuracy was 98%, and it was applied to the production site to contribute to the improvement of the productivity due to the decrease of the defective product.