• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2015

This study aims to investigate test-retest reliability or reproducibility of the paper-pencil test for investigating stereotypes of seven principal controls of passenger cars. The controls include wiper, head light, high beam, door window, ignition key, door key and door lock. Sixty two college-aged students participated in the paper-pencil tests and the tests were conducted twice with an in-between period of 4 weeks. The results showed that the stereotypes of motion-directions for the seven controls by the two paper-pencil tests were the same, and that the percentage agreements between two tests by subjects were ranged from 60.0% to 80.6%. There was a weak linear relationship between averaged rates of responses for the stereotypes of motion-directions for the seven controls and percentage agreements by subjects. Based on these results, it is concluded that the paper-pencil test collects reliable or reproducible data on the stereotypes of motion-directions for passenger cars' controls within four weeks.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1063-1070
• /
• 2005

Number of subway train units that Seoul Metropolitan Subway Corporation as at September 2005 is 1.944 on 4 routes from 60 units at the time of commencement of operation, having grown exponentially. Along with increase in the number of passengers the role of subway as safer and expedient means of transportation is now being required. Furthermore, the Corporation has been researching on means of improving the safety and reliability of subway entry/exit doors which has become an essential task and directly effect the safety of the passengers. In this Study, has developed sensory control system for the entry/exit door of the subway train using non-contact proximity sensor as a part of review of and measures against various issues of entry/exit door of the subway trains currently under operation. In addition, this sensor system was verified through test production and tests. If this technology becomes commercialized and practically utilized in the future, it would be able to make definite contribution to the safer transportation of passengers.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1539-1544
• /
• 2008

There is a existing study dealing with the case that the effect of preventive maintenances to restore the door system is imperfect. When the effect of the preventive maintenance is imperfect, we need to consider the maintenance effect for making reliable and economical maintenance policies. The maintenance policies applicable for imperfect maintenance cases are considered and their effectiveness are evaluated through simulation in cases of passenger door system:PDS.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.95-96
• /
• 2022

Based on the analysis of defects occurring before and after painting work, this study intends to derive a reasonable improvement in judgment criteria and propose an amendment to the relevant law through the establishment of a clear fire door replacement cycle in terms of fire safety.

• Journal of Korea Port Economic Association
• /
• v.29 no.1
• /
• pp.123-141
• /
• 2013

The purpose of this paper is to suggest a plan on promoting use of multimodal transport logistics terms in Incoterms, 2010. This study deals with the terms of three promotion factors which are a user's subjective factors, a trade transport logistics environment factors, and a term content factors. According to analysis results of the factors, a user's subjective factors(3.87 score) are scored the most ones of promotion factors of using multimodal transport logistics terms in Incoterms, 2010, to be compared with a trade transport logistics environment factors(3.60 score). with a term content factors(3.74 score). Therefore, first of all, it is important to promoting use of multimodal transport logistics terms in Incoterms, 2010 through as follows, a user's subjective factors : (1) to understand correlation of door to door multimodal transport and terms of Incoterms, 2010, (2) to promote use of multimodal transport logistics terms in Incoterms, 2010 in door to door multimodal transport, (3) to restrain customary use of FOB, CFR, CIF terms. And, the next, we have to promote use of multimodal transport logistics terms in Incoterms, 2010 through considering a trade transport logistics environment factors and a term content factors.

• Korean Journal of Environment and Ecology
• /
• v.25 no.5
• /
• pp.649-657
• /
• 2011

This study had targeted the Manjong Junction~Hongchun interchange section of Jungang highway in order to analyze the efficiency and improvement of the highway wild-life fences. Being analyzed wild-life fence as an effective facility for the prevention of road-kill, it had founded that the wild animals did not jump over even the two layer guardrail, concrete barrier and noise barrier, fence for rock fall. For the section with high road-kill decrease effect after installing the wild-life fence, the effect was higher at wild-life fence with the height of 1.0m where the door had not been installed and the well connected points of road facility than the area with fence height of 1.5m. The road-kill decrease effect was also high at the well managed areas even if the door has not been installed. Also, road-kill had occurred by concentrating around the end of wild-life fence after installing the fence, Moreover road-kill had also occurred around the cutting section. The door of wild-life fence had higher amount of road-kill occurrence as the installation interval was closer. it was analyzed that the door management has a lot of effect on road-kill decrease. The fence for rock fall, two layer guardrail and concrete barrier having the effect of wild-life fence installed on the road would have to be installed by connecting with wild-life fences through proper facility improvement. Although the door should not be installed if possible, it should be installed as automatic door or gravity door to prevent the door from leaving the door open. An escape route has to be formed for the prompt escape away from the road for the animals entered through the ending section of the fence. The eco-corridor has to be made by restoring the soil layer of dual purpose eco-corridor forming a planting area. Also, the dead body after the accident has to be disposed to the outer section of the road immediately in order to prevent the secondary road-kill by the predator from the road-kill. The fence has to be installed as 500m or longer in both ways, in other words 1,000m or longer, from the targeted spot of minimum accident prevention while connecting up to the bridge or box culvert, etc that are next road facilities if possible to guide wild animals safely to the eco-corridor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.462-468
• /
• 2016

In this paper, we present the results of the numerical analysis employing CONWEP, LS-DYNA FSI(Fluid Structure Interaction), AUTODYN FSI, LS-DYNA ALE(Arbitrary Lagrange Eulerian) and combination of CONWEP and LS-DYNA ALE for blast door fracture and wave propagation through the tunnel by the external explosion. We compared the numerical analysis results with the subscale test data and selected combination of CONWEP and LS-DYNA ALE method as adequate data generation method for the FRM(Fast Running Model) software development. It is expected to save much time and costs by using the numerical simulation data for the various test conditions.

• Journal of computational fluids engineering
• /
• v.12 no.3
• /
• pp.1-7
• /
• 2007

In the present study, the wind pressure transients on platform screen door in island platform caused by a passing train are investigated numerically. The transient compressible 3-D full Navier-Stokes solution is obtained with actual operational condition of subway train and the moving mesh technique adopted for the train movement. To achieve more accurate results, detailed shape of train is included in a computational domain and the entrance and exit tunnel of platform are also modeled. Numerical analyses are conducted on three operational conditions of different velocity variation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2010

The thickness of original hinge model is changed for structural stability in this study. The front end with the largest deformation of 9.8813 mm or the rear middle part with the largest equivalent stress of 6082.6 MPa is respectively shown at door hinge. The lower part of joint pin head with the largest deformation of 0.17499 mm and the largest equivalent stress of 1540.2 MPa are shown. The advanced model with more thickness and stability is shown to have smaller displacement in half and smaller equivalent stress by 3 times by comparing with the original model.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.97-105
• /
• 2009

Optimal design of a roller rail which replaces the ball rail for three-door refrigerators is presented using the finite element analysis and the Taguchi method. Stress and deformation of the roller rail for an initial design are analyzed and evaluated. Optimal design parameters are determined using the Taguchi method. The maximum stress of the optimal design is favorably reduced comparing to the initial design. It is verified through an additional analysis that the drawer on the roller rail will not be derailed even if one opens the drawer with a transverse force.