• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.153-160
• /
• 2019

Welding often results in welding distortion during the assembly process. The welding distortion of thin-plate structures such as the living quarters of ships and offshore installations is a more significant problem than in the case of thick-plate structures. Pre-stressing/heating and fairing, which are additional works to mitigate and control welding distortion, are inevitable, and the construction planning is accordingly delayed. In order to prevent welding distortion and minimize the additional work during the assembly process, increasing the plate thickness and/or the number of stiffeners may be a simple solution, but it may give rise to problems related to cost and weight. In this study, the welding distortion control effect of the type of stiffeners on the door openings of various living quarter structures was investigated using an experimental method and a finite element method. The results showed the feasibility of mitigating and controlling the welding distortion, and the optimum selection of the type of stiffeners was confirmed.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.113-118
• /
• 2010

"Domestic delivery service" is defined the service to deliver goods or packages from point of senders to point of receiver. With the characteristics of door to door, it is must a service provider should know the exact location of destination assuring best utilization of moving path. Generally, location information consist of postal code and address only, which result in difficulties to identify the precise location of destination. It is relatively less correlated between the information that address refers and practical location in Korea address system. For example, the next door to house number 100 is not always house number 101. Therefore, a delivery man additionally uses a paper map or a GPS navigation which carry extra job to input every code of location to the device in order to know precise location. It is also very inconvenient that every delivery man identify the location that address information refers and make a personal decision of the optimum moving path dropping each destination without calculating provisioning process of whole delivery path. As explained above, it is inefficient to find information delivery service required and to generate the optimum path. In results, these difficulties bring in delay of service and increase of cost. In this point, the contents of the thesis suggest a GPS navigation system easy to obtain accuracy of delivery information which enables to automate optimum moving path based on RFID which contains location information.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.67-72
• /
• 2018

A fire shutter is installed to prevent the movement of fire or smoke when a fire occurs inside a building. Fire shutters have access doors for passengers. On the other hand, the present fire shutter door display regulation is only required to be displayed in a different color from the surroundings. Hence, the risk of people not being able to recognize the door of the fire shutter is quite high, and the danger increases further in a smoke situation. Therefore, this study attempted to find a way to mark a fire shutter door that can be recognized even when smoke is spreading. First, a preliminary questionnaire was used to draw three factors to mark the fire shutter door (sign, door background, and edge). The experiment type was set by combining 5 colors for the three derived factors. The experiment was conducted on a total of 122 male and female participants. The results showed that a yellow background, red sign, and red edge have the highest awareness in a normal visual field without smoke. This was also the same in the field of view in the case of a fire with smoke, but the red background, yellow sign, and yellow edge were most noticeable in the case of dark smoke.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.96-103
• /
• 2014

This study investigated the windows and doors of Jecheon Park Dosu's House and Jecheon Jeong Wontae's House, designated as a Important Folklore Cultural Heritage in Jecheon. It aimed to contribute to the study of traditional house, and to the conservation policy of architectural Heritage in Jecheon. This study used the research methods of the literature analysis and the field survey, and it was to analyze the spatial characteristics of the windows and doors in each building. The result are as followings. Firstly, the wooden board door(板張門) of a hinged door type is found in the kitchen of An-chae, and the Bongchang(封窓) and Gwangchang(光窓) towards the courtyard is installed for ventilation and lighting. Secondly, the slender-ribbed windows and doors(細箭 窓戶) of double swinging type towards the courtyard is installed in An-bang, and Merum(遠音) is found. Thirdly, the framed panel door(骨板門) of a hinged door type towards the backyard is found in Daechung(大廳). Lastly, the slender-ribbed windows and doors of double swinging type towards the outside is found in Sarang-bang of Sarang-chae, and Merum(遠音) is installed. Especially, double skin windows and doors is installed in Jecheon Park Dosu's House.

• Journal of Applied Reliability
• /
• v.5 no.2
• /
• pp.273-287
• /
• 2005

Accelerated life test models and procedure are developed to assess the reliability of Refrigerator door switch. The main function of door switch is to operate bulb lamp and fan motor in the refrigerating room. The accelerated life test method and test equipments are developed using the relationship between stresses and life characteristics of the products. Using the developed accelerated life test method, the parameters of the ALT model and life time distribution are estimated and the reliability of the Door S/W at use condition if assessed. The proposed accelerated life test method and procedure may be extended and applied to testing similar kinds of products to reduce test time and costs of the tests remarkably.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.254-259
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the eighteen cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the optimal improvement of dent resistance.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.811-820
• /
• 2006

The Platform Screen Door system(PSD) is scheduled to be installed on the platform of some subway stations in Seoul, Pusan, Kwang-Ju, Daejun and Daegu and all stations of Seoul Subway No 9. will equipped with PSD. On the other hand Seoul Metropolitan Rapid Speed(SMRT) that has operated the train automatically had finished the basic desic design and the execution drawing of PSD and installed successfully the PSD on the platforms in the Kimpo Airport station in Subway Line No 5. at dec. 2005. The exhibition operations of PSD has made the major contribution to build up the safe and optimum subway for the increasing customers. Nowadays PSD has operated on ATO sections and ATS sections. But in the case of closing the door manually in ATO sections, it would be delayed about 5 seconds in closing the door of PSD. Although the interface of PSD, train and the signal system is established automatically, we have to supplement technically on the interface between train, PSD and the ground signal interface equipments. Therefore I will center on the optimizing methods about the interfacing system between the train and the PSD, train and the signal system to overcome the above problems in this study.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.60-68
• /
• 2021

Invisible passenger airbag door system of hard panel types must be designed with a weakened area such that the side airbag will deploy through the instrument panel as like intended manner, with no flying debris at any required operating temperature. At the same time, there must be no cracking or sharp edges in the head impact test. If the advanced airbag with the big difference between high and low deployment pressure ranges are applied to hard panel types of invisible passenger airbag (IPAB) door system, it becomes more difficult to optimize the tearseam strength for satisfying deployment and head impact performance simultaneously. It was introduced the 'Operating Window' idea from quality engineering to design the hard panel types of IPAB door system applied to the advanced airbag for optimal deployment and head impact performance. Zigzab airbag folding and 'n' type PAB mounting bracket were selected.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.167-168
• /
• 2023

The government has established a zero-energy roadmap in accordance with its 2050 carbon neutrality strategy, and from 2023 onwards, residential buildings with 30 generations or more must be constructed as zero-energy structures. In response to this, measures for energy conservation through enhanced building tightness are being developed. The LH (Land and Housing Corporation) aims to achieve the first-stage building tightness performance targets by 2022 in preparation for this. Currently, South Korea has the "KS L ISO9972 - Building Tightness - Measuring the airtightness of buildings by the fan pressurization method" as the method for measuring building tightness, which was established in 2006 and revised in 2016. In practice, the airtightness is measured using the Blower Door Test method, and it is expressed as ACH50 (the number of air changes per hour at a pressure difference of 50 Pa between the indoor and outdoor environments). This study aims to measure and analyze the airtightness of Happy Homes constructed from 2020 to 2022, categorized by building type.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.28-34
• /
• 2019

The purpose of this study is to examine the influence of occupant's path selection on the shape of the pictogram and the opening/closing of the door. This study was carried out through a simulation experiment using computer virtual reality. Exit light pictogram for exit door and exit light pictogram for passage were arranged for each scenario in type T corridor and type + corridor. The computer graphic was used to carry out the simulation. In addition, we analyzed the response of human behavior according to the two directions (left and right) of exit light pictogram for exit door and the effect of opening direction of doorway. In addition, the change of decision-making according to the presence or absence of exit light pictogram for passage was confirmed. The results of the direction selection response were as follows. First, in the case of the T-shaped corridor, if the exit light was not installed on the door, it was influenced by the opening direction of the door. Second, when the exit light is attached to the door, the selectivity in the direction that matches the exit light pictogram direction is high. As a result, it was confirmed that the pictogram direction of the exit light influenced the evacuation route selection of the occupants.